Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features

							251
Wi-Fi
Using WEB services
Registering the WEB service to “LUMIX CLUB”
Check the “FAQ/Contact us” on the following site for compatible WEB services. 
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation
Make sure that you have created an account on the WEB service you want t\
o use, and have the login 
information available.
1Connect to the “LUMIX CLUB” site using a smartphone or computerhttp://lumixclub.panasonic.net/eng/c/
2Enter your “LUMIX CLUB” login ID and password and log in to the se\
rvice
3If you have not registered your email address with “LUMIX CLUB”, r\
egister the 
email address
4Select the WEB service to be used for WEB service link settings and regi\
ster it • Follow the instructions on the screen to register the service.
Sending pictures
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [Web service]
1Select [Via Network] and connect  (→260)
2Select a WEB service you want to connect
3Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→244)
[Send Images While Recording]
4Take a still picture (→242)
[Send Images Stored in the Camera]
4Select the picture (→243) 
SQW0721     
						

							252
Wi-Fi
Using WEB services
 ■Quickly sending pictures in the camera to WEB services
Once you send a picture, you can send pictures to the WEB service as qui\
ckly and easily 
as using a smartphone, only when the environment for connecting to a wir\
eless access 
point is available.
(The instructions below assume that you are already registered to “L\
UMIX CLUB” 
and the camera has a record of a connection to a wireless access point.)\
Display the picture
Select [Ye s ] after pressing  
(When group pictures are selected, press  and then select 
[Upload(Wi-Fi)] or [ Upload All(Wi-Fi)].)
 • The same operation can be performed by touching [   ].(When selecting a group picture, touch [  ],  [  ],  [  ],  [  ],  and 
then [
  ], and then select [ Upload(Wi-Fi)] or [Upload All(Wi-Fi)])Select a WEB service you want to connectCheck the send settings, and select [Set]The camera is connected to the previously used wireless access point and\
 the pictures are sent to 
the WEB service.
 • Step ,  are not necessary when you continue to send another image. • T
o change the transmission setting for the picture, press the [DISP.] button. (→244)
 • T

o terminate the connection, press [MENU/SET] or operate other controls to exit the playback 
screen. You can also terminate the connection by pressing [Wi-Fi] button on the camera. (→229)
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step  and onwards again. • Y
ou can also change the send settings by pressing [Wi-Fi] button while using a Wi-Fi 
connection.  (→229)
 ●If the camera has no records of connections to wireless access points th\
at are available, a screen 
that asks you to select a connection method is displayed. Select the con\
nection method and 
connect the camera to a wireless access point.  (→260)
 ●When you are not registered to “LUMIX CLUB”, a screen that asks yo\
u to acquire a new login ID is 
displayed. Get a login ID and set a password. (→255)
 ●When pictures are displayed as a group, they are all sent. When a single\
 picture in a group is 
displayed, only the picture being displayed is sent. 
SQW0721       
						

							253
Wi-Fi
Using WEB services
When sending images to [Cloud Sync. Service]
Preparation
You need to register to “LUMIX CLUB” (→254) and configure the Cloud Sync. setting to send a picture 
to a Cloud Folder. Use “PHOTOfunSTUDIO” (→274) on a PC or “Image App” on a smartphone to 
configure the Cloud Sync. settings.
 ■About the images sent to a Cloud Folder by the use of [Cloud Sync. Service] 
(Current as of October 2016)
 • If you set the picture destination to [

Cloud Sync. Service], sent pictures are 
temporarily saved in the cloud folder, and they can be synchronized with the device in 
use, such as the PC or smartphone.
 • A

 Cloud Folder stores transferred images for 30 days (up to 1,000 pictur\
es). 
Transferred images are deleted automatically 30 days after the transfer. Furthermore, 
when the number of stored images exceeds 1,000, some images may be delet\
ed 
depending on the [Cloud Limit] (→244) setting even within 30 days after the transfer.
 • When the download of images from a Cloud Folder to all specified devices\
 is  complete, images may be deleted from the Cloud Folder even within 30 day\
s after the 
transfer

.
 →  [Setup] → [Wi-Fi ] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [Cloud Sync. Service]
1Select [Via Network] and connect  (→260)
2Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→244)
[Send Images While Recording]
3Take a still picture (→242)
[Send Images Stored in the Camera]
3Select the picture (→243) 
SQW0721     
						

							254
Wi-Fi
Using “LUMIX CLUB”
About the [LUMIX CLUB]
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize\
 images between the 
devices you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures to WEB services.
 • Y
ou can set the same “LUMIX CLUB” login ID for this unit and a smar\
tphone.  (→257)
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note;
 • The service may be suspended due to regular maintenance or unexpected pr\
oblems,  and service contents may be changed or added to, without prior notice to\
 the users.
 • The service may be stopped in whole or in part with a reasonable period \
of advance notice. 
SQW0721     
						

							255
Wi-Fi
Using “LUMIX CLUB”
Acquiring a new login ID ([New account])
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]  
→ [Set/Add Account] → [New account]
 • Connect to the network. Proceed to the next page by selecting [Next

].
 • A

 confirmation screen will be displayed if a login ID has already been ac\
quired for the 
camera. Select [Ye s ] to acquire a new login ID, or [No] if you do not need to acquire a 
new login ID.
1Select the method for connecting to a wireless access point, and set  (→260) • The settings screen will only appear during the first connection. Connec\
tion methods set on this 
unit are stored and will be used for subsequent connections. If you want\
 to change the wireless 
access point to connect to, press the [
DISP.] button, then change the connecting destination.
 • Proceed to the next page by selecting [Next

].
2Read through the “LUMIX CLUB” terms of use and select [Agree] • You can press   to switch pages. • T
urn the zoom lever to the T side to enlarge the page display (x2 magnification).
 • If you turn the zoom lever to the W side after enlarging the page, the p\
age returns to its original  size (no magnification).
 • Y

ou can use 
    to move the position of the area to be enlarged. • Press [Q.MENU/] button to cancel the process without acquiring a login ID.
3Enter the password • Enter any combination of 8 to 16 characters and numbers for the password\
. • For details on how to enter characters, refer to “Entering  Text” (→49)
4Check the login ID and select [OK] • The login ID (12-digit number) will be displayed automatically .  
When logging in to the “LUMIX CLUB” with a computer, you only need to enter the numbers.
 • A

 message is displayed when the connection is complete. Select [OK].
 • Be sure to make a note of the login ID and password. 
SQW0721     
						

							256
Wi-Fi
Using “LUMIX CLUB”
Using a previously acquired login ID/confirming and changing login ID 
and password ([Set Login ID])
Preparation
To use a previously acquired login ID, confirm your ID and password.
To change the “LUMIX CLUB” password on the camera, access the “L\
UMIX CLUB” website from your 
smartphone or PC and change the “LUMIX CLUB” password in advance.
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]  
→ [Set/Add Account] → [Set Login ID]
 • The login ID and password are displayed. • The password is displayed as “”. • Close the menu if only checking the login ID.
1Select the item you wish to change
2Enter your login ID or password • For details on how to enter characters, refer to “Entering  Text” (→49) • Enter the new password you have created on your smartphone or PC into th\
e camera. 
SQW0721     
						

							257
Wi-Fi
Using “LUMIX CLUB”
To set the same login ID for the camera and the smartphone
Setting the same login ID on this unit and your smartphone is convenient\
 for sending 
images on this unit to other devices or WEB services.
 ■When either this unit or the smartphone has acquired the login ID
Connect this unit to the smartphone (→232)From the “Image App” menu, set the common login ID
 • After connecting this unit to the smartphone, the setup screen for a com\
mon login ID 
may appear when you display the playback screen. 

You can also set a common login 
ID by following the on-screen instructions.
 • This operation is not available for [Wi-Fi Direct

] connection.
 ■When this unit and the smartphone have acquired different login IDs
When you want to use the smartphone’s login ID for this unit
Change the login ID and password for this unit to those acquired by the \
smartphone.
When you want to use this unit’s login ID for the smartphone
Change the login ID and password for the smartphone to those acquired by\
 this unit. 
SQW0721     
						

							258
Wi-Fi
Using “LUMIX CLUB”
Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB] → [Terms of use]
Delete your login ID and account from the “LUMIX CLUB”
Delete the login ID from the camera when transferring it to another party or disposing of it. 
You can also delete your “LUMIX CLUB” account.
 • Changes and other actions to login IDs can only be made to the login ID \
acquired with 
the camera.
 →  [Setup] → [Wi-Fi ] → [Wi-Fi Setup] → [LUMIX CLUB]  
→ [Delete account]
 • The message is displayed. Select [Next

].
1Select [Ye s] in the login ID delete confirmation screen • The message is displayed. Select [Next ].
2Select [Ye s] on the confirmation screen for deleting the “LUMIX CLUB” account\
 • If you want to continue using the service, selecting [No ] will only delete the login ID. Exit the 
menu after it is executed.
3Select [Next] • The login ID is deleted, and then the message notifying the deletion of your account is displayed. 
Select [OK]. 
SQW0721     
						

							259
Wi-Fi
About connections
The following types of connections are available.
[New Connection]Connect after selecting the Wi-Fi function 
and destination. (→232, 241, 242)
[Select a destination from History] Connect using the same settings as a 
previous Wi-Fi connection.
(→264)
[Select a destination from Favorite] Connect using settings registered to 
Favorite.
When a screen similar to the one below is displayed, select a connection\
 method. • Example of operation for displaying a screen: →  [Setup] → [
Wi-Fi] → [Wi-Fi Function] → [New Connection]  
→ [Send Images While Recording ] → [Smartphone]
Wireless access point
Connection method Description
[Via Network] Connects through a wireless access point. (→260)
[Direct] Your device connects directly to this unit.
(If you are out and unable to use your wireless access 
point, or temporarily connecting to equipment you do not 
ordinarily use, or in a similar situation, it is convenient to 
make a direct connection.) (→263) 
SQW0721     
						

							260
Wi-Fi
About connections
Connecting via a wireless access point ([Via Network])
Select a connection method to the wireless access point. • WPS refers to a function that allows you to easily configure the settings related to the connection and security of 
wireless LAN devices. 
To check if the wireless access 
point you are using is compatible with WPS, refer to the 
instruction manual of the wireless access point.
Connection method Description
[WPS (Push-Button)] Save push button type wireless access point that is compatible with 
Wi-Fi Protected Setup™ with a WPS mark.
1Press the wireless access point WPS button until it 
switches to WPS Mode
 • Refer to the wireless access point instruction manual for details.
[
WPS (PIN code)] Save PIN code type wireless access point that is compatible with  
Wi-Fi Protected Setup with a WPS mark.
1On the camera screen, select the wireless access point 
you are connecting to
2Enter the PIN code displayed on the camera screen 
into the wireless access point
3Press [MENU/SET] on the camera
 • Refer to the wireless access point instruction manual for details.
[
From List] Select this option when you are not sure about the WPS compatibility, 
or when you want to search for and connect to a wireless access 
point. (→261) 
SQW0721