Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features

							241
Wi-Fi
Displaying still pictures on a TV
You can display still pictures on a TV that is compatible with a DLNA certified digital 
media renderer (DMR) function.
Preparation
Set the TV to DLNA waiting Mode.
 • Read the operating instructions for your 
TV.
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Playback on TV]
1Select [Via Network] or [Direct] to connect (→260, 263)
2Select the device you wish to connect to • When the connection is established, the screen is displayed.
3Take or play back still pictures on this unit • To terminate the connection, follow the steps below: →  [Setup] → [ Wi-Fi] → [Wi-Fi Function] → [Ye s ]
(You can also close the connection by pressing the [Wi-Fi] button. (→229))
 ●When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K 
resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro 
cable. (→270)
 ●When a TV is connected to this unit, the TV screen may temporarily return to the status before the 
connection. Pictures are displayed again when you take or play back pict\
ures.
 ●Even if [Effect] and [Sound] are set on this unit, these settings are disabled when\
 the pictures are 
played back on a TV during Slide Show playback.
 ●Motion pictures and 4K burst files cannot be played back. ●During Multi Playback, Calendar Playback, or when selecting a focus posi\
tion from a picture 
recorded in Post Focus, pictures displayed on the screen of the camera a\
re not displayed on the 
T V. 
SQW0721     
						

							242
Wi-Fi
When sending pictures, first select [New Connection], then 
select the method of sending pictures.
After you have completed connecting, you can also change 
the sending settings, such as the size of pictures to be sent.
 ■Images that can be sent
Destination JPEGR AW
MP4*1AVCHD*1, *24K Burst File*1
Pictures recorded in 
[Post Focus]*1
[Smartphone] (→245) ○–
○*3– –
[PC] (→248) ○ ○ ○ ○ ○
[Cloud Sync. Service] 
(→253) ○
–
○
*3– –
[Web service] (→250) ○–
○
*3– –
[AV device] (→247) ○– – – –
[Printer]
*1 (→246) ○
– – – –
*1   Sending by [Send Images While Recording] is not available.*2   Files larger than 4  GB cannot be sent.*3   Excluding motion pictures recorded with [Rec Quality] of [4K]. • Some images may not be played back or sent depending on the device. • For more information about picture playback, see the operating instructi\
ons of the 
destination device, or check the WEB service to which you will send the \
pictures.
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you \
take it.
 • [

 
 ] is displayed on the recording screen while connected by 
[
Send Images While Recording], and [   ] is displayed while 
files are being sent.
 • T

o terminate the connection, follow the steps below:
 →  [Setup] → [ Wi-Fi] → [Wi-Fi Function] → [Ye s ]
11
 • You can terminate the connection or change the send settings by pressing \
[Wi-Fi] 
button. (→229) 
You cannot change the settings while sending a still picture. Wait until sending is 
complete.
Sending pictures 
SQW0721     
						

							243
Wi-Fi
Sending pictures
 ●Since the camera gives priority to recording, sending may take longer du\
ring the recording. ●If you turn off the camera before you have completed sending, or if you close the Wi-F\
i 
connection, or in similar situations, unsent files will not be resent.
 ●You may not be able to delete files or use the [Playback] menu while sending. ●Motion pictures, 4K burst files recorded with the 4K Photo function, and\
 pictures recorded in [Post 
Focus] cannot be sent.
 ●If you set [Time Lapse Shot], the Wi-Fi connection is terminated and you cannot use t\
his function.
[Send Images Stored in the Camera]
You can select and send recorded images.
 ■How to select an image(s) after selecting [Single Select] or [Multi Se\
lect]
[Single Select]
Select the picture
SetSet
Select [Set]
[Multi Select]
Select the picture (repeat) • If selected again, the setting will be canceled.23
456
1OKSelect [OK] • The number of pictures that can be sent by [ Multi Select] is 
limited.
 • To change the send settings on a screen that is displayed after the image\
 has been  sent, press [DISP.] button. To close the connection, select [Exit].
 ●Details of the [Playback] menu [Favorite] or [Print Set] settings will not be sent. ●Some images taken with a different camera may not be able to be sent. ●Images that have been modified or edited with a computer may not be able\
 to be sent. 
SQW0721             
						

							244
Wi-Fi
Sending pictures
Changing the settings for sending images
After you have completed connecting, you can change the sending settings\
, such as the 
size of pictures to be sent, by pressing the [DISP.] button.
ItemDescription
[Size] Resize the image to send.
[Original] / [Auto]
*1 / [Change] • If you select [
Auto], the image size is determined by the 
circumstances at the destination.
 • Y

ou can select the image size for [Change] from [M], [S], or [VGA]. 
The aspect ratio does not change.
[File Format]
*2[JPG] / [RAW+JPG] / [ R AW]
[Delete Location Data]
*3
Select whether to delete the location information from images before 
sending them.
[ON]:   
Dele
 te the location information, then send.
[OFF]:
  
Keep the loca
 tion information and send.
 • This operation only deletes the location information from the images that are set to be sent. (The location information will not 
be deleted from the original images stored in this unit.)
[

Cloud Limit]
*4You can select whether to send images when the Cloud Folder runs 
out of free space.
[ON]:   
Do not send images.
[

OFF]:   
Delete images
  from the oldest ones, then send new images.
*1 Only available when the destination is set to [Web service].*2   Only available when the destination is set to [PC].*3   Only available when the destination is set to [Cloud Sync. Service] or [Web service].*4 Only available when the destination is set to [Cloud Sync. Service]. 
SQW0721     
						

							245
Wi-Fi
Preparation
Install “Image App” in advance. (→231)
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [Smartphone]
1Select [Via Network] or [Direct] to connect (→260, 263)
(On your smartphone)
 ■When connecting with [Via Network]
Set Wi-Fi function to “ON”Select a wireless access point and setStart  “Image App”  (→231)
 ■When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]
Start  “Image App” (→231)
 ■When connecting with [Manual Connection] in [Direct]
Set Wi-Fi function to “ON”Select the SSID displayed on this unitStart  “Image App” (→231)
2Select the device you wish to connect to
3Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→244)
[Send Images While Recording]
4Take a still picture (→242)
[Send Images Stored in the Camera]
4Select the picture (→243)
Sending pictures to a smartphone 
SQW0721     
						

							246
Wi-Fi
Wireless printing
You can print out recorded still pictures wirelessly from a PictBridge (\
wireless 
LAN-compatible)*
 printer.
*
  Compliant with the DPS over IP standards.  
Contact the printer manufacturers for details on PictBridge (wireless L\
AN-compatible) printers.
 →  [Setup] → [Wi-Fi ] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images Stored in the Camera] → [Printer]
1Select [Via Network] or [Direct] to connect (→260, 263)
2Select a printer you want to connect
3Select the still picture and print • Pictures are selected the same way as when connecting by USB connection \
cable. For details  (→ 279).
 • T

o terminate the connection, press [Q.MENU/
] button.
 ●Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be printed. 
SQW0721     
						

							247
Wi-Fi
Sending pictures to AV device
Still pictures and motion pictures can be sent to AV devices in the home (home AV 
devices), such as DLNA compatible recorders.
Wireless access pointHome AV  device
Preparations
When sending a picture to AV devices, set your device to DLNA waiting Mode.
 • Read the operating instructions of your device for details.
 →  [Setup] → [Wi-Fi ] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [AV device]
1Select [Via Network] or [Direct] to connect (→260, 263)
2Select the device you wish to connect to
3Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→244)
[Send Images While Recording]
4Take a still picture (→242)
[Send Images Stored in the Camera]
4Select the picture (→243)
 ●Sending may fail depending on the operational status of the AV device. Also, sending may take a 
while. 
SQW0721     
						

							248
Wi-Fi
Sending pictures to a PC
Still pictures and motion pictures recorded by the camera can be sent to\
 a PC.
Preparations • Turn the computer on.
 • Prepare folders for receiving images on the PC before sending a picture \
to the PC (below). • If the standard settings are changed for the workgroup on the connected \
PC, you must change settings in [

PC Connection] on this unit. (→266)
To create a folder that receives images
 • Create a PC user account (account name (up to 254   characters) and password (up to 
32   characters)) consisting of alphanumeric characters. An attempt to create a receive 
folder may fail if the account includes non-alphanumeric characters.
 ■When using “PHOTOfunSTUDIO”
 Install “PHOTOfunSTUDIO” on the PC (→274)Create a folder that receives images with “PHOTOfunSTUDIO” • For details, refer to the operating instructions of “PHOT OfunSTUDIO” (PDF).
 ■When not using “PHOTOfunSTUDIO”
(For Windows)
Supported OS: Windows 10 / Windows 8.1 / Windows 8 / Windows 7
Example: Windows 7
Select a folder you intend to use for receiving, then right-clickSelect [Properties], then enable sharing of the folder • For details, refer to the operating instructions of your PC or Help on t\
he operating system.
(For Mac)
Supported OS: OS X v10.5 to v10.11
Example: OS X v10.8
Select a folder you intend to use for receiving, then click on the items\
 in the following 
order 
[File] → [ Get Info]
Enable sharing of the folder • For details, refer to the operating instructions of your PC or Help on t\
he operating system. 
SQW0721     
						

							249
Wi-Fi
Sending pictures to a PC
Sending pictures to a PC
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Send Images While Recording] / [Send Images Stored in the Camera]   → [PC]
1Select [Via Network] or [Direct] to connect (→260, 263)
2Select the PC you want to connect to • If the PC you want to connect to is not displayed, select [ Manual Input], then enter the computer 
name (for Mac, enter the NetBIOS name).
3Select the folder you want to send to
4Check the send settings, and select [Set] • To change the send setting, press the [DISP.] button. (→244)
[Send Images While Recording]
5Take a still picture (→242)
[Send Images Stored in the Camera]
5Select the picture (→243)
 ●Folders sorted by the sent date are created in the specified folder, and pictures are saved in those 
folders.
 ●If the screen for a user account and password entry appears, enter the o\
ne you set on your PC. ●If the computer name (for Mac, the NetBIOS name) contains spaces, etc.\
, the name may not be 
properly recognized. If you cannot connect, we recommend changing the co\
mputer name (for 
Mac, the NetBIOS name) to a combination of 15 or less alphanumeric char\
acters only.
 ●If a firewall is enabled by the OS or security software, this unit may b\
e unable to connect to the 
computer. 
SQW0721     
						

							250
Wi-Fi
Using WEB services
Through “LUMIX CLUB”, you can send still pictures and motion pictu\
res to social 
networking services, etc. By selecting the setting to automatically tran\
sfer still pictures 
and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures 
and motion pictures on a PC or a smartphone.
Wireless access pointWEB services
Cloud 
synchronization 
services
LUMIX CLUB
When sending images to WEB service
Preparation
You need to register to “LUMIX CLUB” 
(→254) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service.  (→251)
 ●Panasonic assumes no responsibility for the damages resulting from the l\
eakage, loss, etc. 
of images uploaded on WEB services.
 ●When uploading images to the WEB service, do not delete images from this\
 camera, even 
after they have finished sending, until you have checked that they have \
been properly 
uploaded to the WEB service. Panasonic assumes no responsibility for the\
 damages 
resulting from the deletion of images stored in this unit.
 ●Images uploaded to the WEB service cannot be displayed or deleted with t\
his camera. Check 
images by accessing the WEB service with your smartphone or computer.
 ●If sending images fails, a report email outlining the failure will be se\
nt to the email address 
registered with “LUMIX CLUB”. 
SQW0721