Panasonic Digital Camera Dmc Lf1 Owners Manual For Advanced Features

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 221 -
 ■Change or delete information on registered AV device
Information on AV device that has already been registered can be changed or deleted.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [External AV device], and press 
[MENU/SET]
Select the AV device you want to change or delete
Select [Edit] or [Delete]
Item Description
[Edit] Change information on AV device that has already been registered.
Perform steps 
 through  of “Configuring the external AV device 
settings”. (→220)
[Delete] Delete information on AV device that has already been registered.
 • Confirmation screen is displayed. It is executed when [Y

es] is selected.
 • Exit the menu after it is executed.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 222 -
[Smart Transfer] automatically transfers pictures from your camera to your PC, AV 
equipment or Cloud Folder.




AC adaptor
(supplied)
PC
  [Auto Transfer] set to [ON] PC
AV device
Web services,  Cloud Folder
  Charging  Start 
transferring
 • [Smart Transfer] is executed while the camera battery is charging ([Auto Transfer]).  Battery will not be used up just for transferring pictures. 
 • Pictures in the camera that were recorded after the setting was made are transferred.  Pictures recorded before that are not transferred.
Pictures that can be sent with [Smart 

Transfer]
JPEG RAW MP4 AVCHD 3D
[Smart Transfer] Yes No Yes No Yes
Follow the procedures below to perform [Smart Transfer].
1Setting [Smart Transfer] (→224)
2[Smart Transfer] (→225)
*
  Pictures in the camera can also be trans ferred regardless of whether the battery is charging. 
([Transfer Now])    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 223 -
 ●When [Auto Transfer] is set to [ON], the camera automatically uploads recorded 
pictures. For this reason pictures may be uploaded unintentionally if, for example, 
you share this unit with other people. Panasonic assumes no responsibility for any 
damages caused by uploaded images.
 ●Panasonic assumes no responsibility for any damages caused by the use of [Smart 
Transfer].
 ●Electromagnetic waves from the camera can affect instruments and meters. If you are 
on an airplane or anyplace where the use of functions like Wi-Fi or NFC is prohibited, 
turn [Airplane Mode] to [ON].    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 224 -
Setting [Smart Transfer]
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select transfer destination and press 
[MENU/SET]
Select the method for connecting to a wireless access point, 
and set
 • For details (→230).
Set the transfer destination
When [PC] is selected • For details regarding preparation before transfer , read “Sending pictures to a 
PC”. (→199)
  Use cursor button to select a PC y ou want to connect, and then press 
[MENU/SET]
  Use cursor button to select the fold er you want to send to, and then press 
[MENU/SET]
When [Cloud Sync. Service] is selected
 • For details regarding preparation before transfer

, read “When sending images to 
[Cloud Sync. Service]”. (→210)
When [AV device] is selected
 • For details, read “Sending pictures to 

AV equipment”. (→194)
 • Select the 

AV device you want to connect, and then press the [MENU/SET] 
button.
Use cursor button to select [Auto Transfer] and press  
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
 • Only the images you recorded when [Auto  Transfer] is set to [ON] is transferred.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 225 -
[Smart Transfer]
Preparation: Set [Smart Transfer]. (→224)
Turn off the camera
(When using a power outlet)
Connect the AC adaptor (supplied) and the camera using the 
USB connection cable (supplied), and plug the AC adaptor 
(supplied) into the electrical outlet
(When using a PC)
Connect the camera to a computer using the USB connection 
cable (supplied)
 • [Smart Transfer] starts automatically according to the [Charge Priority]  (→228) 
setting.
 • [Smart 

Transfer] is not available when the memory card is locked.
 • Depending on the specifications of the PC, [Smart 

Transfer] may fail.
 ●Except at the ambient temperature between 0 °C and 40 °C (32 °F to 104 °F), [Smart 
Transfer] may not work.
 ●When [Destination] is set to [PC], the pictures are stored in the incoming folder 
created. (→200)
 ●If there are pictures that are not transferred when [Auto Transfer] is set to [OFF], 
the message that confirms whether to transfer these pictures is displayed. Select a 
desired option.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 226 -
 ■Transferring pictures now
Preparation: Set [Smart Transfer]. (→224)
Connect the AC adaptor (supplied) and the camera using the 
USB connection cable (supplied), and plug the AC adaptor 
(supplied) into the electrical outlet
 • Switch to Playback Mode.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Transfer Now] and press  
[MENU/SET]
 • Confirmation screen is displayed. It is executed when [Y es] is selected.  
Exit the menu after it is executed.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 227 -
Changing transfer destination and settings of pictures
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Set Destination] and press  
[MENU/SET]
Use cursor button to select an item and press [MENU/SET]
Item Description
[Destination] Change the transfer destination.
[PC], [Cloud Sync. Service], [AV device]
 • If you are not changing the wireless access point you want to connect 
to, press the [Q.MENU/ ] button.
 ■To change the wireless access point you want to connect to  Select [Change  Access Point] and press [MENU/SET]
(If you selected [Cloud Sync. Service], select [Yes] at the confirmation 
screen of the connection destination and press [MENU/SET])
  Select the method for connecting to a w ireless access point, and set • For details (→230).
[Size] Change the size of the picture to be transferred.
[Original], [Change]
 • [Change]:  [M] or [S] can be selected for picture size. 
The aspect ratio of the pictures does not change.
[File Format]
*1[JPG], [RAW+JPG], [RAW]
[Delete Location 
Data]
*2You can select whether to delete location information from the picture 
when transferring pictures.
[ON]: 
 Erase location information and transfer

.
[OFF]: 
 T

ransfer without deleting location information.
 • The location information is only deleted for the transferred pictures. (Location information is not deleted from pictures in this unit)
[Cloud Limit]
*2You can select whether to perform [Smart Transfer] when the capacity of 
the Cloud Folder runs out of free space.
[ON]: 
 Do not transfer pictures.
[OFF]:  Delete oldest pictures in order and transfer new pictures.
[Exit] Exit the destination setting menu.
*1 Only available when the [Destination] is set to [PC].*2 Only available when the [Destination] is set to [Cloud Sync. Service].    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]VQT5A33
- 228 -
 ■To change priority settings for charging and picture transfer  
[Charge Priority]
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Charge Priority] and press  
[MENU/SET]
Use cursor button to select an item and press [MENU/SET]
Item Description
[ON] Give priority to charging. Pictures are transferred after charging.
[OFF] Give priority to picture transfers.
 • When remaining battery is low

, charging may be prioritized.
 • Exit the menu after it is executed.
 ■Checking transfer history of the pictures [Display Log]
You can check the day the picture was sent and its details.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Display Log] and press  
[MENU/SET]
 • Dates and content of transferred images are displayed. Close the menu after checking.    
						

							Wi-Fi/NFC
About connections
VQT5A33- 229 -
After selecting the Wi-Fi function and sending destination, select the connection method. 
If you are out and unable to use your wireless access point, or temporarily connecting to 
equipment you do not ordinarily use, or in a similar situation, it is convenient to make a 
direct connection. 
If you are connecting with the same settings as used previously, you can quickly start 
using the Wi-Fi function by connecting with [History Connection] or [Favorite Connection].
Wireless access point
Connection methodDescription
[Via Network] Connects through a wireless access point. (→230)
[Direct] Your equipment connects directly to the camera. (→233)    
						

							Wi-Fi/NFC
About connectionsVQT5A33
- 230 -
Connecting at home (through a network)
Select a connection method to the wireless access point.
*
  WPS refers to a function that allows you  to easily configure the 
settings related to the connection and security of wireless LAN 
devices. To check if the wireless access point you are using is 
compatible with WPS, refer to the manual of the wireless access 
point.
Connection method Description
[WPS (Push-Button)] Save push button type wireless access point that is compatible with 
Wi-Fi Protected Setup™ with a WPS mark.
Press the wireless access point WPS button until it 
switches to WPS Mode
 • Refer to the wireless access point instruction manual for details.
[WPS (PIN code)] Save PIN code type wireless access point that is compatible with 
 
Wi-Fi Protected Setup with a WPS mark.
 Select the wireless access point you are connecting to  Enter the PIN code displayed on the camera screen into the 
wireless access point
 Press [MENU/SET] • Refer to the wireless access point instruction manual for details.
[Manual Connection] Select this option when you are not sure about the WPS compatibility
, 
or when you want to search for and connect to a wireless access 
point.
 • For details (→231).