Panasonic Digital Camera Dmc Lf1 Owners Manual For Advanced Features

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 181 -
 ■Easily transferring pictures in the camera
You can establish a Wi-Fi connection using the NFC function and easily transfer the 
picture on display simply by holding the smartphone close to the camera. Pictures can 
be transferred as soon as they are recorded, so you can easily transfer them to your 
friends’ and family’s smartphones. *
*
 “Image App” must be installed to use this function.
Preparations:
(On the camera)
 • Set [NFC Operation] to [ON]  (→240)
(On your smartphone)
 • Check if your smartphone is a compatible model • Set Wi-Fi function to “ON” • Install “Image 

App” in advance  (→174)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 182 -
On the camera, play back the picture you wish to transfer to a 
smartphone
Start “Image App” on the smartphone you are transferring the 
picture to
While the [  ] is displayed on the connection screen of the 
“Image App”, hold the smartphone close to the camera
 • It may take some time to complete connecting. • If you are transferring multiple pictures, repeat steps  and . (Multiple pictures 
cannot be transferred in one batch.)
Hold the smartphone close to this area
(within 5 mm (0.20 inch))
 ●It may take several minutes to complete the picture transfer depending on the 
environment used.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 183 -
Sending pictures in the camera to social networking services
Connect to a smartphone (→175)
Select [  ] from “Image App”
Drag the picture and send it to the social networking service, 
etc.
 • The picture will be sent to the social networking service or other WEB services. • Functions can be assigned to the top, bottom, left and right as you wish.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 184 -
Sending location information to the camera from a smartphone/tablet
You can acquire location information from a smartphone, and write it on images 
afterwards.
Refer to  (→156) for how to write the location information on the images recorded by this unit.
 ●Read the [Help] in the “Image App” menu for further details on how to operate. ●Caution: 
Be sure to pay special attention to the privacy, the likeness rights, etc. of the 
subject when you use this function. Use at your own risk.
 ●If you have changed the clock setting of this unit or the smartphone after [T ime sync], 
perform [Time sync] again.
 ●On the smartphone, you can set the acquisition interval of location information and 
check the transfer status of location information. Refer to [Help] in the “Image  App” 
menu for details.
 ●(When using “Image App” for iOS) 
If you press the Home or On/Off button of a smartphone while [Rec. loc. Info] is 
working, location information recording is stopped.
 ●The smartphone may fail to acquire location information in China and the border area 
in the neighboring countries of China. (As of March 2013)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 185 -
Operating the camera to send pictures to a smartphone or tablet
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending a picture each time one is recorded 
[Send Images While Recording] Yes No No No No
Sending selected pictures
[Send Images Stored in the Camera] Yes No Yes No No
 • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about 
picture playback.
 • For more details about picture sending methods.  (→237)
Preparation: 

Install “Image App” in advance.  (→174)
See the part of the manual that applies to your objective. 
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→186)
Sending selected pictures ([Send Images Stored in the Camera]) (→188)
 ●When sending images on a mobile network, high packet communication fees may be 
incurred depending on the details of your contract.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 186 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Send Images While Recording] 
and press [MENU/SET]
Use cursor button to select [Smartphone] and press  
[MENU/SET]
(Continued on the next page)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 187 -
Select [Via Network] or [Direct] to connect (→229)
(On your smartphone)
 ●When connecting with [Via Network]  Set Wi-Fi function to “ON”  Select a wireless  access point and set  Start “Image App” *
 (→174)
 ●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]  Start “Image App” *
 (→174)
 ●When connecting with [Manual Connection] in [Direct]  Set Wi-Fi function to “ON”  Select the SSID that matches the o ne displayed on the screen of this unit, and 
then enter the password
  Start “Image App” *
 (→174)
*   A window indicating that the smartphone is connecting to the camera is displayed. Press the 
“Back” button on Android devices. Select “Close” on iOS devices.
Select the device you wish to connect to
 • When the connection is established, the screen is displayed.  To change the send 
setting, press the [DISP.] button.  (→238)
Take still pictures
 • The still pictures are sent automatically after taking them. • T
o change the setting or disconnect, press [Wi-Fi] button. 
You cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 188 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera] and press [MENU/SET]
Use cursor button to select [Smartphone] and press  
[MENU/SET]
(Continued on the next page)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone VQT5A33
- 189 -
Select [Via Network] or [Direct] to connect (→229)
(On your smartphone)
 ●When connecting with [Via Network]  Set Wi-Fi function to “ON”  Select a wireless  access point and set  Start “Image App” *
 (→174)
 ●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]  Start “Image App” *
 (→174)
 ●When connecting with [Manual Connection] in [Direct]  Set Wi-Fi function to “ON”  Select the SSID that matches the o ne displayed on the screen of this unit, and 
then enter the password
  Start “Image App” *
 (→174)
*   A window indicating that the smartphone is connecting to the camera is displayed. Press the 
“Back” button on Android devices. Select “Close” on iOS devices.
Select the device you wish to connect to
 • When the connection is established, the screen is displayed.  To change the send 
setting, press the [DISP.] button.  (→238)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→171)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    
						

							Wi-Fi/NFC
Displaying still pictures on a TV
VQT5A33- 190 -
You can display still pictures on a TV that is compatible with a DLNA certified digital 
media renderer (DMR) function.
Preparations: Set the TV to DLNA waiting Mode.
 • Read the operating instructions for your 
TV.
 • For details about compatible devices, refer to the website below. http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only .)
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Playback on TV] and press 
[MENU/SET]
Select [Via Network] or [Direct] to connect (→229)
Select the device you wish to connect to
 • When the connection is established, the screen is displayed.
Take or play back still pictures on this unit
 • To change the setting or disconnect, press [Wi-Fi] button. (→171)