Panasonic Digital Camera Dmc Lf1 Owners Manual For Advanced Features

							Application (View)
Using the [Playback] menuVQT5A33
- 161 -
 • For the setting procedures of the menu.  (→52)
[Video Divide]
A single motion picture can be split into 2 parts. This is convenient when you want to keep 
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free 
space on your card, such as when traveling.
Select the motion picture to split with cursor button and then 
press [MENU/SET]
Press  at where you want to split a motion picture to pause it
Press 
Video Divide
Cancel • A confirmation screen is displayed.   Select [Yes] with cursor button and then press  
[MENU/SET].
 • The original motion picture that was split does not 
remain. 
(There will only be the 2 motion pictures that were created 
after the split.)
 ●During splitting, do not turn off the camera or remove the card or battery. If you do so, 
the motion picture may be deleted.
 ●Splitting a motion picture recorded in [MP4] changes the order of pictures. It is 
recommended to display with [Calendar] (Calendar Playback) or [Filtering Play].
 ●Motion pictures with a short recording time cannot be divided.     
						

							Application (View)
Using the [Playback] menuVQT5A33
- 162 -
 • For the setting procedures of the menu.  (→52)
[Resize]
Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc.
(Still pictures recorded at the smallest recording pixel level cannot be further reduced.)
 ■[SINGLE]
Use cursor button to select [SINGLE] and press [MENU/SET]
Use cursor button to select a still picture and press  
[MENU/SET]
Use cursor button to select size and press [MENU/SET]
Current size
Size after change
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.
(Continued on the next page)    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 163 -
 ■[MULTI]
Use cursor button to select [MULTI] and press [MENU/SET]
Use cursor button to select size and press [MENU/SET]
Use cursor button to select a still picture and press [DISP.] 
button 
(up to 100 pictures)
Number of pixels before/after 
resizing
Resize setting • T o cancel  
→ Press [DISP.] button again.
 • T

o execute  
→ Press [MENU/SET].
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.
 ●Picture quality is reduced after resizing. ●Cannot resize the following pictures. • Motion pictures • 3D still pictures • Panorama pictures • Still pictures that date or other texts had already been stamped • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ]    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 164 -
 • For the setting procedures of the menu.  (→52)
[Cropping]
Enlarge your still pictures and crop unwanted areas.
Use cursor button to select a still picture, and then press 
[MENU/SET]
Select area to crop and press [MENU/SET]
Cropping
CancelZoom SetExpand Change position
 • Confirmation screen is displayed. If you select [Y es], the operation is executed. • Y
ou can also enlarge the still picture with the control dial.
 ●Original Face Recognition information will not be copied when still pictures are 
cropped.
 ●Picture quality is reduced after cropping. ●Cannot crop the following pictures. • Motion pictures • 3D still pictures • Panorama pictures • Still pictures that date or other texts had already been stamped • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ]    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 165 -
 • For the setting procedures of the menu.  (→52)
[Favorite]
By labeling your favorite pictures with a star (
), you can play back your favorite pictures 
only, or you can delete all pictures except your favorites. Up to 999 pictures can be set as 
favorites.
Use cursor button to select [SINGLE] or [MULTI] and press 
[MENU/SET]
Use cursor button to select picture and press [MENU/SET]
 ●[SINGLE]
Favorite picture setting
 ●[MULTI]
Favorite picture setting
 • To cancel → Press [MENU/SET] again.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes].
 ●You cannot select the [Favorite] setting for still pictures recorded with the [Quality] 
setting [  ].    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 166 -
 • For the setting procedures of the menu.  (→52)
[Print Set]
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at the shop to check for compatibility .)
For more information visit: 
http://panasonic.jp/dc/dpof_110/white_e.htm
Use cursor button to select [SINGLE] or [MULTI] and press 
[MENU/SET]
Use cursor button to select picture and press [MENU/SET]
Use cursor button to set number of pictures and press  
[MENU/SET]
(repeat steps  and  when using [MULTI] (up to 999 pictures))
 ●[SINGLE]
Count Date
Date print set
No. to print
 ●[MULTI]
CountDate
Date print set
No. to print
 • Date print setting/release → Press [DISP

.] button
 ■To clear all
Select [CANCEL] in step 
 and select [Yes].
 ●Date print setting cannot be made for still pictures that have been taken with [Date 
Stamp] and pictures with a [Text Stamp] applied.
 ●Depending on the type of printer, the printer settings may take priority over camera 
settings.
 ●Cannot be set for files that are not compliant with the DCF standard. ●Some DPOF information set by other equipment cannot be used. In such cases, 
delete all of the DPOF information and then set it again with this camera.
 ●Print setting cannot be made for motion pictures. ●You cannot select the [Print Set] setting for still pictures recorded with the [Quality] 
setting [  ].    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 167 -
 • For the setting procedures of the menu.  (→52)
[Protect]
Set protection to disable picture deletion. Prevents deletion of important pictures.
Use cursor button to select [SINGLE] or [MULTI] and press 
[MENU/SET]
Use cursor button to select picture and press [MENU/SET]
 ●[SINGLE]
Picture protected
 ●[MULTI]
Picture protected
 • To cancel → Press [MENU/SET] again.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes].
 ●The picture is erased when formatting, even if it is protected. ●May not be effective when using other devices. ●When you set the write-protect switch on the card to the “LOCK” position, the picture 
is not erased.    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 168 -
 • For the setting procedures of the menu.  (→52)
[Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Face Recognition.
Use cursor button to select [REPLACE] or [DELETE] and 
press [MENU/SET]
Use cursor button to select the picture and press [MENU/SET]
Use cursor button to select a person and press [MENU/SET]
 • If [DELETE], go to step . • People whose Face Recognition information has not been registered cannot be  selected.
Use cursor button to select the person to replace for another 
and press [MENU/SET]
Use cursor button to select [Yes] and press [MENU/SET]
 ●When Face Recognition information is deleted, it cannot be restored. ●Pictures for which all Face Recognition information has been deleted are not 
categorized in Face Recognition during [Category Selection].
 ●Recognition information cannot be edited in protected pictures.    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 169 -
 • For the setting procedures of the menu.  (→52)
[Copy]
You can copy pictures between built-in memory and memory card.
Use cursor button to select the copy method (direction) and 
press [MENU/SET]
:  Copy all pict ures from built-in memory to card (go to step ).:  Copy 1 pictu re at a time from card to built-in memory.
Use cursor button to select picture and press [MENU/SET]
Use cursor button to select [Yes] and press [MENU/SET]
 • To cancel → Press [MENU/SET].
 ●Copying pictures may take several minutes. Do not turn off the camera or perform 
other operations during copying.
 ●If identical names (folder/file numbers) are present in the copy destination, a new 
folder for copying will be created when copying from built-in memory to card (). 
Identically-named files will not be copied from card to built-in memory (). ●The following settings are not copied. Set them again after copying.
- [Print Set]    - [Protect]    - [Favorite]
 ●Only pictures from Panasonic digital cameras (LUMIX) may be copied. ●Motion pictures recorded in [AVCHD] format cannot be copied.    
						

							Wi-Fi/NFC
Wi-Fi® Function and NFC Function
VQT5A33- 170 -
Wi-Fi/NFC
 ■Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that the appropriate measures are taken for safety 
designs and defects for the systems used. Panasonic will not take any responsibility 
for any damage that arises when using the camera for any purpose other than as a 
wireless LAN device.
 ■Use of the Wi-Fi function of this camera is presumed to be in countries 
where this camera is sold
There is the risk that the camera violates the radiowave regulations if used in countries 
other than those where this camera is sold, and Panasonic takes no responsibility for 
any violations.
 ■There is the risk that data sent and received via radio waves may be 
intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
 ■Do not use the camera in areas with magnetic fields, static electricity or 
interference
 • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. Radio waves may not reach the camera.
 • Using the camera near devices such as microwave ovens or cordless telephones that use the 2.4 GHz radio wave band may cause a decrease in performance in both 
devices.
 ■Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function, wireless networks will be searched 
automatically. When this happens, wireless networks that you are not authorized to use 
(SSID *
) may be displayed, however do not attempt to connect to the network as it may 
be considered as unauthorized access.
*
  SSID refers to the name that is used to id entify a network over a wireless LAN connection. If the 
SSID matches for both devices, transmission is possible.
 ■Before Use
 • To use the Wi-Fi function on this unit, a wireless access point or a destination device  equipped with the wireless LAN function is required.
 ■The camera is compatible with NFC
Using the NFC (Near Field Communication) function, 
the camera and a smartphone can easily exchange the 
information needed to establish a Wi-Fi connection.