Panasonic Digital Camera Dmc Lf1 Owners Manual For Advanced Features

							Wi-Fi/NFC
Using WEB servicesVQT5A33
- 211 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Press [MENU/SET]
Select [Via Network] and connect (→230)
Check the send setting
 • When the connection is complete, the screen is displayed.  To change the send 
setting, press [DISP.] button.  (→238)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→171)
You cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5A33
- 212 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Press [MENU/SET]
Select [Via Network] and connect (→230)
Check the send setting
 • When the connection is complete, the screen is displayed.  To change the send 
setting, press [DISP.] button.  (→238)
(Continued on the next page)    
						

							Wi-Fi/NFC
Using WEB servicesVQT5A33
- 213 -
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→171)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”
VQT5A33- 214 -
About the [LUMIX CLUB]
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the 
devices you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures to WEB services or external  AV device.
 • Y

ou can set the same “LUMIX CLUB” login ID for this unit and a smartphone.  (→218)
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note;
 • The service may be suspended due to regular maintenance or unexpected problems,  and service contents may be changed or added to, without prior notice to the users.
 • The service may be stopped in whole or in part with a reasonable period of advance notice.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Set/Add Account]
Select [New account]
 • Connect to the network. Proceed to the next page by selecting [Next]. • A  confirmation screen will be displayed if a login ID has already been acquired for 
the camera. Select [Yes] to acquire a new login ID, or [No] if you do not need to 
acquire a new login ID.
(Continued on the next page)    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 215 -
Select the method for connecting to a wireless access point, 
and set
 • For details (→230). • The settings screen will only appear during the first connection. Connection methods set on this unit are stored and will be used for subsequent connections. 
If you want to change the wireless access point to connect to, press the [DISP .] 
button, then change the connecting destination.
Press [MENU/SET]
Read through the “LUMIX CLUB” terms of use and select 
[Agree]
 • You can press   to switch pages. • Press [Q.MENU/ ] button to cancel the process without acquiring a login ID.
Enter the password
 • Enter any combination of 8 to 16 characters and numbers for the password. • For details on how to enter characters, refer to “Entering  Text” (→65).
(Continued on the next page)    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 216 -
Check the login ID and select [OK]
 • The login ID (12-digit number) will be displayed automatically .  
When logging in to the “LUMIX CLUB” with a computer, you only need to enter the 
numbers.
 • A

 message is displayed when the connection is complete. Select [OK].
 • Be sure to make a note of the login ID and password. • Close the menu after changing settings.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 217 -
 ■Using a previously acquired login ID/confirming and changing login ID 
and password ([Set Login ID])
Preparation:
To use a previously acquired login ID, confirm your ID and password.
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” 
website from your smartphone or PC and change the “LUMIX CLUB” password in 
advance.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Set/Add Account]
Select [Set Login ID]
 • The login ID and password are displayed. • The password is displayed as “”. • Close the menu if only checking the login ID.
Select the item you wish to change
 • The confirmation screen is displayed when changing the login ID. Select [Yes].
Enter your login ID or password
 • Refer to “Entering  Text” (→65) for information on how to enter text. • Enter the new password you have created on your smartphone or PC into the 
camera. If the password dif
fers from the one you created on your smartphone or 
PC, you will not be able to upload images.
 • Close the menu after changing settings.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 218 -
 ■To set the same login ID for the camera and the smartphone/tablet
 • Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or WEB services.
 ■When either this unit or the smartphone/tablet has acquired the login ID
Connect this unit to the smartphone (→175)
From the “Image App” menu, set the common login ID
 • The login IDs for this unit and the smartphone become the same.
 • After connecting this unit to the smartphone, the setup screen for a common login ID may appear when you display the playback screen. 

You can also set a common login 
ID by following the on-screen instructions.
 • This operation is not available for [Wi-Fi Direct] connection.
 ■When this unit and the smartphone/tablet have acquired different login IDs
(When you want to use the smartphone’s login ID for this unit)
Change the login ID and password for this unit to those acquired 
by the smartphone
(When you want to use this unit’s login ID for the smartphone)
Change the login ID and password for the smartphone to those 
acquired by this unit
 ■Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Terms of use]
 • The camera will connect to the network and the terms of use will be displayed.  Close the menu after checking the terms of use.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 219 -
 ■Delete your login ID and account from the “LUMIX CLUB”
Delete the login ID from the camera when transferring it to another party or disposing of 
it. You can also delete your “LUMIX CLUB” account.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Delete account]
 • The message is displayed. Select [Next].
Select [Yes] in the login ID delete confirmation screen
 • The message is displayed. Select [Next].
Select [Yes] on the confirmation screen for deleting the 
“LUMIX CLUB” account
 • If you want to continue using the service, selecting [No] will only delete the login ID. Exit the menu after it is executed.
Select [Next]
 • The login ID is deleted, and then the message notifying the deletion of your account is displayed. Select [OK].
 • Exit the menu after it is executed.
 ●Changes and other actions to login IDs can only be made to the login ID acquired with 
the camera.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”VQT5A33
- 220 -
Configuring the external AV device settings
Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.
 • See the following site for 

AV device that is compatible with “LUMIX CLUB”. 
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only .)
Preparation:
Check the address number (16-digit number) and access number (4-digit number) of the 
destination AV device issued by “LUMIX CLUB”.
(Refer to the AV device instruction manual for details)
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→52)
Use cursor button to select [External AV device], and press 
[MENU/SET]
Select [Add new device]
Enter the address number
Enter the access number
Enter any name
 • Up to 28 characters can be entered.  A double-byte character will be treated as 
two characters. 
 • Close the menu after changing settings.
 ●Refer to “Entering Text” (→65) for information on how to enter text.