Panasonic Digital Camera Dmc Lf1 Owners Manual For Advanced Features

							Application (View)
Playing back pictures in order automatically  [Slide Show] VQT5A33
- 151 -
 ■Operations during Slide Show
 ●Cursor button
The operation guide appears on the bottom right of the LCD monitor .
Pause/play
Previous
Next
Stop Volume downVolume up
 • If you do not perform any operation for approx. 2 seconds, the operation guide is 
turned of f. To display the guide again, press the [DISP.] button.
 ●Control dial
PreviousNext
 ●When [URBAN] has been selected, the picture may appear in black and white as a 
screen effect.
 ●When panorama pictures, motion pictures, or burst pictures (picture group) are played 
back, the [Duration] setting is disabled.
 ●Part of [Effect] cannot be used when displaying pictures on television using an HDMI 
micro cable or when displaying pictures recorded in portrait position.
 ●Screen effects do not operate during a [3D Play] slide show. ●Music effects cannot be added.    
						

							Application (View)
Searching by recording date  [Calendar]VQT5A33
- 152 -
You can search for pictures by the date they were recorded.
Select [Calendar] from the [Playback Mode] menu (→145)
Use cursor button to select the recording date to display
 • Only months when pictures were taken are shown on the calendar screen.
Press [MENU/SET] to display a list of pictures from the 
selected date
Use cursor button to select picture and press [MENU/SET]
 ●If there is more than one picture recorded on the same date, the first picture taken on 
that date will be selected.
 ●You can display the calendar between January 2000 to December 2099. ●Pictures recorded without configuring [Clock Set] will show the date January 1st, 
2013.
 ●Pictures taken with destination settings made in [World Time] are displayed in the 
calendar screen using the appropriate date for the destination’s time zone.    
						

							Application (View)
Retouching pictures
VQT5A33- 153 -
[Auto Retouch]
You can adjust the color and brightness of a still picture to bring them into balance.
 • New pictures are created after editing pictures with [Auto Retouch]. Before starting to  edit, make sure that there is enough free space in the built-in memory or memory card.
 • Example picture
Select a still picture to retouch during playback and press  
Use cursor button to select [Auto Retouch] and press  
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
 • A confirmation screen is displayed. If you select [Yes], the new retouched still picture is saved.
 • When [OFF] is selected, you can restore a picture to its original condition (before  retouching).
 ■Operation from the [Playback] menu
 Select [Retouch] in the [Playback]  menu, and then press [MENU/SET] Use cursor button to select [Auto Retouch] and press [MENU/SET] Use cursor button to select picture and press [MENU/SET]
Read Step  above to perform further steps.
 ●The retouch effect may be less apparent in some still pictures. ●Some still pictures may have higher noise levels after retouching.  ●It may not be possible to use [Auto Retouch] with still pictures that have already been 
retouched. 
 ●It may not be possible to retouch still pictures recorded with other cameras. ●You cannot retouch the pictures in a picture group as a group. Retouch each picture in 
a picture group after displaying it.
 ●[Auto Retouch] is unable to perform in the following cases: • Motion pictures • Panorama pictures • 3D still pictures • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ]    
						

							Application (View)
Retouching picturesVQT5A33
- 154 -
[Creative Retouch]
You can retouch recorded still pictures by selecting the effect that you want to apply.
 • New pictures are created after editing pictures with [Creative Retouch]. Before starting  to edit, make sure that there is enough free space in the built-in memory or memory 
card.
Select a still picture to retouch during playback and press  
Use cursor button to select [Creative Retouch] and press 
[MENU/SET]
Press   to select effect
 • The picture retouched with the selected ef fect is displayed. • When [No Ef
fect] is selected, you can restore a picture to its original condition 
(before retouching).
Setting Effect
[Expressive] This picture effect creates a pop art style picture that enhances the color.
[Retro] This picture effect creates the soft appearance of a tarnished picture.
[Old Days] This effect adds a bright, soft and nostalgic feel to the overall image.
[High Key] This picture effect creates a brighter and lighter toned appearance for the 
entire picture.
[Low Key] This picture effect creates a darker somber appearance for the entire 
picture to emphasize the bright portions.
[Sepia] This picture effect creates a picture with sepia tone.
[Dynamic Monochrome] This picture effect creates a monochromatic picture with a higher 
contrast and more dramatic atmosphere.
[Impressive Art] A picture effect with strong contrast that illustrates a surreal and dramatic 
atmosphere.
[High Dynamic] This picture effect creates a picture with a well-balanced brightness for 
the entire picture (from dark areas to bright areas).
[Cross Process] This picture effect creates a unique atmosphere with surprising colors.
 • Use cursor button to adjust coloring, then press [MENU/SET].
[T

oy Effect] This picture effect creates a picture that resembles pictures taken by a 
toy camera with a reduced amount of peripheral light.
 • Use cursor button to adjust coloring, then press [MENU/SET].
(Continued on the next page)    
						

							Application (View)
Retouching picturesVQT5A33
- 155 -
Setting Effect
[Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama.
[Soft Focus] This picture effect creates a soft appearance by intentionally blurring the 
entire picture.
[Star Filter] This picture effect creates a picture with the light from the light source 
that shines in the shape of a cross, creating a gorgeous atmosphere.
[One Point Color] This picture effect creates a monochromatic picture by retaining the color 
you selected only, and adds memorable emphasis to it.
 • Use cursor button to move the frame in the center of the screen, select 
the color to retain, and then press [MENU/SET].
 • For more information about picture ef fects (→98 - 104) • When you press [DISP
.] button, a description of the selected effect is displayed.
Press [MENU/SET]
 • A confirmation screen is displayed. If you select [Yes], the new retouched still picture is saved.
 ■Operation from the [Playback] menu
 Select [Retouch] in the [Playback]  menu, and then press [MENU/SET] Use cursor button to select [Creative Retouch] and press [MENU/SET] Use cursor button to select picture and press [MENU/SET]
Read Step  (→154) to perform further steps.
 ●The retouch effect may be less apparent in some still pictures. ●The image effect may appear weak compared to the effect given by the [Creative 
Control] Mode.
 ●It may not be possible to retouch still pictures recorded with other cameras. ●You cannot retouch the pictures in a picture group as a group. Retouch each picture in 
a picture group after displaying it.
 ●[Creative Retouch] is unable to be performed in the following cases: • Motion pictures • Panorama pictures • 3D still pictures • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ]    
						

							Application (View)
Using the [Playback] menu
VQT5A33- 156 -
You can specify picture protection, resizing, print settings, and other settings for pictures 
you have taken.
 • For the setting procedures of the menu. (→52) • The setting methods vary depending on the menu item.
 ●In the following cases, new pictures are created after they have been edited. Before 
starting to edit, make sure that there is enough free space in the built-in memory or 
memory card.
 • [T

ext Stamp]
 • [Retouch] • [Resize] • [Cropping] ●It may not be possible to set or edit pictures taken with other cameras.
[Location Logging]
You can send location information (latitude and longitude) obtained with your smartphone/
tablet to this unit, and write the location information to the pictures.
 • Location information cannot be written to still pictures in the built-in memory. If you want  to record location information on them, copy the pictures in the built-in memory to a 
memory card, then perform [Location Logging].
Preparation: 
Send location information to this unit from your smartphone/tablet  (→184)
Use cursor button to select [Add Location Data] and press 
[MENU/SET]
Use cursor button to select a period for writing location 
information, and then press [MENU/SET]
 • Confirmation screen is displayed. If you select [Yes], the operation is executed. • Location information is written to the picture. • [] is displayed for pictures that have location information written to it.    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 157 -
 ■Abort writing location information
Press [MENU/SET] while location information is being written • [  ] is displayed for the period of the abort operation. 
If selected again while [  ] is displayed, writing location information will resume where 
it left of
f.
 ■Delete received location information
 Use cursor button to select [Delete  Location Data] and press [MENU/SET]  Use cursor button to select a period for deleting location information, and then press 
[MENU/SET]
 • Confirmation screen is displayed. If you select [Y

es], the operation is executed.
 ●Location information may not be written if there is not enough free space on your 
card.
 ●If the card is locked, you cannot write location information to pictures or delete 
received location information.
 ●You can only write location information to pictures recorded with this unit. ●Location information will not be written to pictures that were recorded after you 
selected [Send location data] (→184).
 ●Location information will not be written to AVCHD motion pictures.    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 158 -
 • For the setting procedures of the menu.  (→52)
[Title Edit]
You can give titles, etc. to your favorite still pictures. 
Use cursor button to select [SINGLE] or [MULTI], and then 
press [MENU/SET]
Select a still picture
 ●[SINGLE]
Use cursor button to select a 
still picture and press  
[MENU/SET] ●[MULTI]  
(up to 100 pictures with the same text) 
Use cursor button to select a still picture and 
press [DISP.] button
 [Title Edit] setting
  [Title Edit] already set
 • T
 o cancel  
→ 
 Press [DISP

.] button 
again.
 • T

o execute  
→ Press [MENU/SET].
Enter characters (Entering text (→65))
 • T

o delete a title, delete all the characters in the character input screen.
 ●Cannot be used in the following cases: • Motion pictures • 3D still pictures • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ] ●To print text, use [Text Stamp] or “PHOTOfunSTUDIO” on the supplied CD-ROM.    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 159 -
 • For the setting procedures of the menu.  (→52)
[Text Stamp]
You can stamp the recording date and time, names, travel destination, travel dates, etc. 
on the recorded still pictures.
Use cursor button to select [SINGLE] or [MULTI], and then 
press [MENU/SET]
Select a still picture
 ●[SINGLE]
Use cursor button to select a 
still picture and press  
[MENU/SET] ●[MULTI] (up to 100 pictures) 
Use cursor button to select a still picture and 
press [DISP.] button
  [Text Stamp] setting • T o cancel  
→ 
 Press [DISP

.] button 
again.
 • T

o execute  
→ Press [MENU/SET].
Use cursor button to select [Set] and press [MENU/SET]
Use cursor button to select items and press [MENU/SET]  
(→160)
Use cursor button to select settings and press [MENU/SET] 
(→160)
Press [Q.MENU/ ] button
Use cursor button to select [OK] and press [MENU/SET]
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    
						

							Application (View)
Using the [Playback] menuVQT5A33
- 160 -
 ■Items that can be stamped 
[Shooting Date] [W/O TIME]: Stamp recording date 
[WITH TIME]: Stamp recording date and time 
[Name]
: Stamp name registered in Face Recognition: Stamp name registered in [Baby] or [Pet]
[Location] Stamp location registered in [Setup] menu’s [Travel Date]
[Travel Date] Stamp Travel Date set in [Setup] menu’s [Travel Date] 
[Title] Stamp text registered in [Title Edit]
 • Items set to [OFF] are not stamped.
 ●Do not request date printing in store or make date printing on printer for still 
pictures with date stamps. (Date printing may be overlapping.)
 ●Cannot stamp texts on the following pictures. • Motion pictures • 3D still pictures • Panorama pictures • Still pictures that date or other texts had already been stamped • Still pictures taken without setting clock • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ] ●Characters may be cut off on certain printers. ●Text is difficult to read when stamped on pictures of 0.3M or less.
[Retouch]
[Auto Retouch]: For details (→153)
[Creative Retouch]: For details  (→154)