Panasonic Digital Camera Dmc Gm5 Owners Manual

							271
11. Using the Wi-Fi function
∫Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating  instructions of the destination 
device.
•For details on how to send images, refer to  P300.
Sending images to a smartphone/tablet by controlling the camera
JPEGRAWMP4AVCHD3D
Sending an image each time a recording is made
([Send Images While Recording]) ±
————
Select and send the images
( [Send Images Stored in the Camera] ) ±
— ±——
Preparations
•
Install the “ Image App ” in advance.  (P261)
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] )≠ P272
Select and send the images ([Send Images Stored in the Camera])≠P273 
						

							11. Using the Wi-Fi function
272
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P294)
3Select a device you want to connect.4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P302)
5Take pictures.
•The pictures are sent automatically after taking them.
•To change the setting or disconnect, press [Wi-Fi].  (P258)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
(You can also terminate the connection by performing the follow ing operations:
>   [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes] )
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] )
> [New Connection]  > [Send Images While Recording]  > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and se t.
3 Start “ Image App ”.  (P261)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Dir ect]:
1 Start “ Image App ”.  (P261)
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of  this unit, and 
then enter the password.
3 Start “ Image App ”.  (P261)
Wi-Fi
MENU 
						

							273
11. Using the Wi-Fi function
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P294)
3Select a device you want to connect.
4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P302)
5Select [Single Select] or [Multi Select].
Select and send the images ([Send Images Stored in the Camera])
> [New Connection]  > [Send Images Stored in the Camera]  > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and se t.
3 Start “ Image App ”.  (P261)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Dir ect]:
1 Start “ Image App ”.  (P261)
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of  this unit, and 
then enter the password.
3 Start “ Image App ”.  (P261)
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.•To change the send settings on a screen that is displayed after  the image has been sent, 
press [DISP.]. To terminate the connection, select [Exit]. 
Wi-Fi
6HW
2. 
						

							11. Using the Wi-Fi function
274
Displaying pictures on a TV
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P294)
3Select a device you want to connect.
•When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.
•To change the setting or disconnect, press [Wi-Fi].  (P258)
(You can also terminate the connection by performing the follow ing operations:
>   [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes] )
•When a TV is connected to this unit, the TV screen may temporar ily return to the status before 
the connection. Pictures are displayed again when you take or p lay back pictures.
•[Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures cannot be played back.•During the multi/calendar playback, pictures displayed on the s creen of this unit are not 
displayed on TV.
You can display pictures on a TV that supports the 
Digital Media Renderer (DMR) function of the DLNA 
standard.
Preparations
Set the TV to DLNA waiting mode.
•
Read the operating instructions for your TV.
> [New Connection]  > [Playback on TV]Wi-Fi
MENU 
						

							275
11. Using the Wi-Fi function
Printing Wirelessly
∫Methods for sending and images that can be sent
•
Some images may not be sent depending on the device.•For details on how to send images, refer to  P300.
1Select the menu.
2Select [Via Network] or [Direct], and connect.  (P294)3Select a printer you want to connect.4Select pictures, and then print.
•The procedure for selecting pictures is the same as the one for  when the USB connection 
cable is connected.
For details, refer to  P320.
•To change the setting or disconnect, press [Wi-Fi].  (P258)
(You can also terminate the connection by pressing [ ].)
Not available in these cases:
•
Motion pictures cannot be printed out.
You can send images to a compatible printer, and print 
them wirelessly.
JPEGRAWMP4AVCHD3D
Select and send the images
( [Send Images Stored in the Camera] ) ±
————
Preparations
•
You can print out recorded pictures wirelessly from a PictBridg e (wireless LAN-compatible)¢ 
printer.
¢ Compliant with the DPS over IP standards.
For details on the PictBridge (wireless LAN-compatible) printer , contact the respective 
company.
>  [New Connection]  > [Send Images Stored in the Camera]  > [Printer]Wi-Fi 
						

							11. Using the Wi-Fi function
276
When sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV 
devices).
∫ Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.
•For information on the playback of images, check the operating  instructions of the destination 
device.
•For details on how to send images, refer to  P300.
A
Wireless access point BHome AV device
JPEGRAWMP4AVCHD3D
Sending an image each time a recording is made
([Send Images While Recording]) ±
——— ±
Select and send the images
( [Send Images Stored in the Camera] ) ±
——— ±
Preparations
When sending a picture to AV devices, set your device to DLNA w aiting mode.
•
Read the operating instructions of your device for details.
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] )≠ P277
Select and send the images ([Send Images Stored in the Camera])≠P277 
						

							277
11. Using the Wi-Fi function
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P294)3Select a device you want to connect.4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P302)
5Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P258)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
(You can also terminate the connection by performing the follow ing operations:
>   [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes] )
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P294)3Select a device you want to connect.
4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P302)
5Select [Single Select] or [Multi Select].
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] )
> [New Connection]  > [Send Images While Recording]  > [AV device]
Select and send the images ([Send Images Stored in the Camera])
> [New Connection]  > [Send Images Stored in the Camera]  > [AV 
device]
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.•To change the send settings on a screen that is displayed after  the image has been sent, 
press [DISP.]. To terminate the connection, select [Exit]. 
Wi-Fi
MENU
Wi-Fi
6HW
2. 
						

							11. Using the Wi-Fi function
278
When sending images to PC
∫Methods for sending and images that can be sent
¢ A motion picture recorded in [AVCHD] can be sent to [PC] if the  file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
•Some images may not be played back or sent depending on the device.
•For information on the playback of images, check the operating  instructions of the destination 
device.
•For details on how to send images, refer to  P300.
You can send pictures and motion pictures recorded 
with this unit to a PC.
JPEGRAWMP4AV C H D¢3D
Sending an image each time a recording is made
([Send Images While Recording]) ±±
—— ±
Select and send the images
( [Send Images Stored in the Camera] ) ±±±±±
Preparations
(On the camera)
•
If the workgroup of the destination PC has 
been changed from the standard setting, you 
also need to change the setting of this unit in 
[PC Connection]. 
(P303)(On your PC)
•Turn the computer on.•Prepare folders for receiving images on the 
PC before sending a picture to the PC. 
(P279)
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] )≠ P280
Select and send the images ([Send Images Stored in the Camera])≠P281 
						

							279
11. Using the Wi-Fi function
•Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters. An attemp t to create a receive folder 
may fail if the account includes non-alphanumeric characters.
∫ When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.
•For details on hardware requirements and installation, read “About the supplied software” 
(P313) .
2Create a folder that receives images with “ PHOTOfunSTUDIO ”.
•To create the folder automatically, select [Auto-create]. To specify a folder, create a new 
folder, or set a password to the folder, select [Create manuall y].
•For details, refer to the operating instructions of “ PHOTOfunST UDIO ” (PDF).
∫When not using “ PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows Vista/Windows 7/Windows 8/Windows 8.1
Example: Windows 7
1Select a folder you intend to use for receiving, then right-cli ck.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
(For Mac)
Supported OS: OS X v10.5 to v10.9
Example: OS X v10.8
1Select a folder you intend to use for receiving, then click on the items in the 
following order.
[File]   [Get Info]
2Enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
To create a folder that receives images 
						

							11. Using the Wi-Fi function
280
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P294)3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Ma nual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.5Check the send settings, and select [Set].
•To change the send setting, press [DISP.].  (P302)
6Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P258)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
(You can also terminate the connection by performing the follow ing operations:
→   
[Setup] →  [Wi-Fi] → [Wi-Fi Function] → [Yes])
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] )
>[New Connection]  > [Send Images While Recording]  > [PC]
Wi-Fi
MENU