Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  61
DID Day/Night Ringing
Incoming DID calls can be set to ring at day destinations when the system is in day mode and ring at 
night destinations when the system is in night mode.
Hardware Requirements
•N/A
Related Programming
• FF1-4: DID Day Destination
• FF1-4: DID Night Destination
Considerations
•N/A
DID Day/Night Busy/Delayed Ringing
DID Day/Night Busy/Delayed Ringing causes an incoming DID call to a busy...

62 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see “Line Appearances” on page 163.
Busy Lamp Field Delayed Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to delay ring on 
those keys. 
Hardware Requirements
•N/A
Related Programming
• FF4: FF Key Assignments
Considerations
• ISDN phones may not set BLF ringing.
• For more...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  63
Related Programming
• FF2: Trunk Programming (Alarm Ringing)
• FF11-02: Slide/Alarm Ringing Timer
Considerations
• If slide ringing is enabled, it will override alarm ringing.
SSD TRS Override
Description
System Speed Dial (SSD) numbers may be used to outdial calls from extensions that otherwise have 
outgoing call restrictions (i.e., Toll Restriction Service [TRS]). 
Hardware Requirements
•N/A
Related...

64 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
For example, an outgoing call is an ARS Outgoing call (G) but it is also a transferred call. The SMDR 
data condition code will be T to indicate that the call was an Outgoing Transfer. (A transferred call’s 
condition code takes precedence over the type of call - ARS Outgoing call [G].)
Table 8.  Priority of incoming call condition codes
For example, an incoming call is a DID.DDI Incoming call (D), but it is...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  65
CO line No. (CO line No.: 1 to 576 / When CO line is disconnected while the call is on hold: 
*1 to *576)
Dialed No. (24 digits max. including 0-9, *, # Cannot display Flash or Pause. If a number is 
hidden, * will appear instead of digits. * will stay with the call even if the call is transferred. 
For Format 2, an I Proceeds the digits if it is an incoming call.)
Accounting code (10 digits max.)
Verified...

66 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
• TRS can restrict the use of the star (*) or pound (#) digits on a TRS class basis.
The following calling restrictions are also available:
• Forced ARS Restriction (The ARS feature controls outside calls.)
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• The dialing restrictions included in this feature help prevent unauthorized outgoing calls. It is 
possible; however, to program your...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  67
Virtual Port
Description
Virtual ports are not physical ports in the System. They are phantom or simulated ports used in the 
System to support:
• Virtual extension ringing
• Virtual floating hold
Up to 96 virtual ports may be assigned per cabinet. 
Virtual Port used for Virtual Extension
You can assign an actual extension number to a virtual port. You can then assign the extension number 
as any actual...

68 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Voice Mail Integration (Third Party)
Description
The System supports third party Voice Mail systems with features such as:
• Answer Supervision for Voice Mail
• Call Forward ID Code for Voice Mail
• DID/DNIS/DDI ID Code for Voice Mail
• High Priority Message Waiting
• Message Key ID Code
Answer Supervision for Voice Mail
Description
This feature allows the DBS 576 to send an answer signal to third-party Voice...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  69
Operation
To set a Call Forward ID Code for Voice Mail:
To clear the ID Code:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
DID/DNIS/DDI Voice Mail ID Code
DID/DNIS/DDI calls may be sent directly to voice mail through the used of the DID Voice Mail ID 
Code. A prefix and suffix may be specified to be sent to the voice mail as well as a chosen number of 
DID digits.
Either no digits...

70 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Related Programming
• FF1-4-06: DID Number Automatic Send to VM
• FF1-4-06: VM ID Code Prefix
• FF1-4-06: VM ID Code: Suffix
Considerations
• Each pause is a fixed 1 second delay.
• If you do not assign a Voice Mail ID Code, the DID digits will be sent to voice mail.
• Only one Voice Mail ID Code is available for the system.
High Priority Message Waiting
Message waiting displays and LEDs may be utilized by the...