Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  51
Extension Name Assignments
Extension names can be up to 10 characters in length. (Assignment of extension names must be 
allowed in the Extension COS.)
Operation
To set extension names using a large-display or small-display phone:
Action Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   Press the PROG
 key.
3.   Press the *
 key.
4.   Enter 2 
for the Extension Name Assignment...

52 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Example 1. Large-display phone
To enter D:
a.  Press the first soft key on the top left.
b.  Press the fourth FF key from the left on the bottom row.
To enter o:
a.  Press the third soft key from the top right.
b.  Press the third FF key from the left on the bottom row. 

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  53
Example 2. Small-display phone
Refer to the following diagram to determine which one-touch key to press. (See step 7-8 above.)
To enter D:
a.  Press the first one-touch key from the left on the bottom row.
b.  Press the fourth FF key from the left on the bottom row.
-  To enter o:
a.  Press the third one-touch key from the left on the top row.
G H I J K L M N O P Q R S T U V W X A B C D E F Y Z . , ’ -
a b c...

54 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
b.  Press the third FF key from the left on the bottom row.
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• Extension names can be up to 10 characters in length.
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of 
Service (COS) that allows access to User Maintenance features. (See Chapter 4 “User 
Maintenance” of this document.)
Speed Dial Name...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  55
SSD Names:
To set SSD names using a large-display or small-display phone:
3.   Press the * key.
4.   Enter 0 for the PSD Name Assignment mode.
A B C D E F P80 displays (where P80 = 
PSD bin 80)
5.   Press the up or down arrow key to display the desired PSD 
bin number.A B C D E F PXX displays (where PXX 
= desired PSD bin number)
6.   Enter the extension name:
•   If using a large-display phone, press the...

56 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16 
characters. 
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of 
Service (COS) that allows access to User Maintenance features. (See Chapter 4 “User 
Maintenance” of this document.)
Network Facilities...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  57
For more information on System Networking, see the System Networking Reference Manual.
Network Call Transfer
Network Call Transfer allows a call at an extension to be transferred to another extension in the 
network.
Network Extension Calling
Network Extension Calling allows you to reach an extension on another PBX. Based on the number 
you dial, the System network routes the call automatically.
Network...

58 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Considerations
•N/A
Power Failure Transfer
Description
Power Failure Transfer provides telephone service to a limited number of Single Line Telephones 
(SLTs) during a power failure. The SLTs are connected to the CO via a Power Failure Unit (PFU). In 
the event of a power failure, the power failure extensions have dial tone directly from the CO. 
(System features and restrictions do not apply.)
Hardware...

Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98  59
Programming Devices
Description
The dealer may program the System either by using:
• A digital key telephone equipped with display
• A PC-Based Customizing Tool
Telephone Programming
The System can be fully programmed from an extension telephone equipped with 12 FF keys and a 
display. While major system configuration changes may be more easily performed using a PC 
programmer, all programming is available...

60 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
• DID Day/Night Ringing
• DID Day/Night Busy/Delayed Ringing
• Busy Lamp Field Ringing
• Busy Lamp Field Delayed Ringing
• Slide Ringing
• Alarm Ringing
Day 1/ Day 2/Night Ringing
When the System is in Day 1 mode, calls can be directed to ring at one or more extensions or at a hunt 
group per the Day 1 ringing assignments. 
When the System is in Day 2 mode, calls can be directed to ring at one or more...