Panasonic DBS 576HD Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 3-33
Related Programming
•N/A
Considerations
•N/A
Free Slot
Description
The DBS 576HD cabinet contains 5 free slots. These slots can be used for trunk cards, extension 
cards, or certain option cards. 
Some circuit cards such as the Integrated Services Digital Network (ISDN) - Primary Rate Interface 
(PRI) card occupy more that one slot.
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A...

3-34 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Pilot Terminal Hunt Group
Pilot Terminal Hunt Group directs calls to a pilot number. The System begins with the first member 
and hunts through the group for the first available member to receive the call. If no member is 
available (extension is busy or there is no answer for a specified amount of time), the call is queued 
for the first member to become available. You can also set the Queuing Timer to...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 3-35
Related Programming
• FF5-1: Hunt Groups Mode
• FF5-1: Pilot Number
• FF5-1: Member
• FF5-1: Delayed Hunt Timer
• FF5-1: Queuing Timer
• FF5-1: Next Hunting
Considerations
• If a member of the hunt group has Do-Not-Disturb (DND) or Call Forwarding - All set, that 
phone is temporarily removed from the hunt group.
• If a member of the hunt group has Call Forwarding - Busy set and the extension is busy,...

3-36 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Considerations
•N/A
LAN TAPI
Description
LAN TAPI opens a line of communications between the DBS 576HD’s switching systems and a PC. 
This is accomplished through the use of a Telephony Server connected to a LAN. Users on PCs can 
use specific applications to send and receive information to and from the DBS 576HD via the LAN. 
Using a software program called the Telephony Service Provider (TSP), call...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 3-37
Hardware Requirements
•N/A
Related Programming
• FF1-3: MCO Incoming/Outgoing
• FF5-2: MCO Outgoing Trunk Assignments
• FF5-3: MCO Incoming Trunk Assignments
• FF2: Trunk Tenant Group Assignments
• FF3: Extension Tenant Group Assignments
Considerations
• When you first assign a trunk to a Trunk Tenant Group from the initial setting of (0), the system 
automatically assigns the trunks as a member of the...

3-38 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
• Extensions
• Trunks
• Direct Inward Dials (DIDs)
• Personal Speed Dials (PSDs)
• Systems Speed Dials (SSDs)
Trunks names and DID names must be assigned in dealer programming mode. Extension names and 
Speed Dial names may be assigned from a display telephone.
This feature does not require the use of a DSS/72 console or entering the programming mode.
Extension Name Assignments
Extension names can be up...

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 3-39
Example 1. Large-Display Phone
To  e n t e r  D:
a.  Press the first soft key on the top left.
b.  Press the fourth FF key from the left on the bottom row.
To  e n t e r  o:
a.  Press the third soft key from the top right.
10.   Repeat steps 7-8 as many times as necessary to enter the 
desired extension name.
Note: Press the FLASH key to clear the entire entry.
11.   Press the HOLD key when finished....

3-40 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
b.  Press the third FF key from the left on the bottom row.
Example 2. Small-Display Phone
Refer to the following diagram to determine which one-touch key to press. (See step 7-8 above.)
To  e n t e r  D:
a.  Press the first one-touch key from the left on the bottom row.
G H I J K L M N O P Q R S T U V W X A B C D E F Y Z . , ’ -
a b c d e fg h i j k lm n o p q rs t u v w xy z : & / sp 

Section 700 - Operation Chapter 7. SLT Features
576-50-700 DBS 576HD (USA) issued September 2001 3-41
b.  Press the fourth FF key from the left on the bottom row.
To  e n t e r  o:
a.  Press the third one-touch key from the left on the top row.
b.  Press the third FF key from the left on the bottom row.
Hardware Requirements
•N/A
END MODE
END MODE
PROG
CONF 

3-42 DBS 576HD (USA) issued September 2001 576-50-700
Chapter 7. SLT Features Section 700 - Operation
Related Programming
•N/A
Considerations
• Extension names can be up to 10 characters in length.
• The ability to make extension name assignments is allowed/restricted to anyone with a COS that 
allows access to User Maintenance features. (See Chapter 4 “User Maintenance” of this 
document.)
Speed Dial Name Assignments
You can assign names to PSD numbers from a display telephone without entering the...