Panasonic Cz Rtc4cz Rtc3 Operating Instructions Manual

35(EN)
Initial Settings  Touch sound     Contrast
 Backlight     Language 
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Initial settings].
▲ ▼ → 
3
Select the item to set.
▲ ▼ → 
Touch sound
4▲ ▼ →  →   
(Press 2 times to fi nish.)ON
OFF
Contrast
4◄ ► →  →   
(Press 2 times to fi nish.)
Backlight
4◄ ► →  →   
(Press 2 times to fi nish.)
Language 
4▲ ▼ →  →   
(Press 2 times to fi nish.) 

36(EN)
Initial Settings  Password change    Temp sensor
 Main/sub    Vent output   
 Contact address
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Initial settings].
▲ ▼ → 
3
Select the item to set.
▲ ▼ → 
4
Enter the password as necessary.
▲  ▼ → ► → 
(Repeat)
•  Select the number with ▲▼ and move to 
the next fi eld with /£.
Password change
5
Enter a new password.
▲  ▼ → ► → 
(Repeat)
6
Enter the password again to 
confi...

37(EN)
Temp sensor
•  Select the temperature sensor to 
control the room temperature.
Temp 
sensorRemote 
controllerIndoor unit
Main/sub
•  When 2 remote controllers are 
connected to the same indoor unit, 
this registers one remote controller 
as [Main] and the other as [Sub]. 
(There is no difference in function 
between Main and Sub, however, 
when the remote controller sensor is 
selected for the temperature sensor 
setting, the [Main] sensor controls 
the operation.)
Vent output
•  [Set]: When the...

38(EN)
Ventilation Setting
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Ventilation].
▲ ▼ → 
3
Select [Ventilation ON/OFF].
4
Select [ON] or [OFF]
▲ ▼ → 
 →  (Press 2 times to fi nish.) 

39(EN)
Setting List
This provides the meanings of setting information icons.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Setting list].
▲ ▼ → 
3
Select the item.
▲ ▼ ◄ ► → 
•  Only icons currently being displayed on 
the screen are displayed here.
4
Confi rm.
Confirm, then 
 →  (Press 2 times to 
fi nish.) 

40(EN)
  Setting information icon list
Icon Description Page
[Lock indiv. fl ap] is set. P.13
Switching between Heat and Cool/Dry mode is prohibited (Switching to Auto 
mode is also prohibited.). –
Remote control operation is restricted by a central control device. –
The indoor unit fi lter needs to be cleaned. P.20
The engine oil needs to be replaced (only when the gas heat pump air 
conditioner is used).–
[ON/OFF timer] is set. P.14
[Weekly timer] is set. P.15
Energy saving operation is in process. P.8...

41(EN)
When the [Centrally 
controlled] message 
is displayed  Being centrally controlled, operation is not 
possible. 
Blackout?
  After recovery from blackout, press  
again.
  àIf operation does not start, turn off the circuit 
breaker and consult the dealer of purchase 
about the symptom and Model No.
Is the circuit breaker 
turned off?   Turn it on and press  again.   àIf operation does not start, turn off the circuit 
breaker and consult the dealer of purchase 
about the symptom and Model No....

42(EN)
Model No.CZ-RTC3
Dimensions (H) 120 mm x (W) 120 mm x (D) 16 mm
Weight 180 g
Temperature/
Humidity range 0 ˚C to 40 ˚C / 20 % to 80 % (No condensation)
*Indoor use only.
Power Source DC16 V (supplied from indoor unit)
Clock Precision
± 30 seconds/month (at normal temperature 25 
˚C) 
*Adjust periodically.
Holding 
time 72 hours (When fully charged)
*Approx. 8 hours are required for full charge.
Number of 
connected indoor 
units Up to 8 units
Specifi
 cations
© Panasonic Corporation 2014