Panasonic Cz Rtc4cz Rtc3 Operating Instructions Manual

5(EN)
Preparations How to UseSetting ChangeWhen 
NecessaryPage
Thank you for purchasing the 
Panasonic high-spec wired remote 
controller.
 
 Read the Operating Instructions 
carefully for safe use. This 
manual describes the Operating 
Instructions of the wired remote 
controller. Read this manual as 
well as operating instructions 
supplied with indoor units and 
outdoor units.
 
 Be sure to read the “Safety 
Precautions” (P.3, 4) before 
using.
 
 Keep this manual with operating 
instructions...

6(EN)
Top screen
  Operation stop 
screen   Item selection 
screen   
Lock screen display
Remote controller 
name (P.34)Operation is locked. 
(P.33)Present time & 
day (P.33)
Setting 
information 
icon
When 
checking the 
meanings 
of all icons 
(P.39)
Operation guide (P.7) Cursor Operation 
mode
Set temperature Fan speed Flap
[Operation lock] is functioning.
(P.33)
  To cancel lock
Press 
 button for 
4 seconds. The indoor unit is stopped or slight blow operation is in process. When 
inspection 
is...

7(EN)
Menu screen (P.10)
Screen name Present time & day
The currently operable content is simply 
displayed.
• ▲▼◄►: Cross key buttons
• 
: Enter button
Icon Description Page
The indoor unit fi lter needs to be cleaned. P.20
The engine oil needs to be replaced.
(Only when using a gas heat pump air conditioner.)-
Switching operation modes is prohibited.
(Switching to Auto mode is also prohibited.)-
Remote control operation is restricted by a central control device. -
[ON/OFF timer] is set. P.14
[Weekly...

8(EN)
Basic Operations
1
Start operation.
Press 
.(The operation indicator illuminates.)
 
 To change the setting(P.10)
 
 To turn the energy saving 
operation ON/OFF
Press during operation.
(Only for models equipped with the 
energy saving function.)
 
 To stop(The operation indicator turns off.)
2
Select the item to set.
Press ◄  ►.
3
Change the setting.
Press ▲▼  →  .
(The cursor disappears.)
Energy saving operation 
is in process.
Operation indicator
Note
 
 Operation modes that cannot be set are...

9(EN)
Perform the following operations in step 2 on page 8.
  Operation mode (e.g. Cool, Heat, etc.)
Press ◄.
* Auto: 
The mode is 
automatically 
switched to 
Cool or Heat to 
achieve the set 
temperature.↓Heat
Dry
Cool
Fan
Auto
  Set temperature
Press . (When the cursor is not 
visible)
• Cool/Dry : 18 °C to 30 °C
• Heat  : 16 °C to 30 °C
• Auto  : 17 °C to 27 °C
  Fan speed
Press ►.
  Flap
Press ► 2 times.
  Flap Setting for Each Indoor 
Unit
 (P.12)
•  : Swing
• Pressing ▲▼ 
during swing can...

10(EN)
1
Display the menu screen.
  To return to the previous screenPress .
  When no operation is performed 
in each setting screen for several 
minutes
The display returns to the top screen.
2
Select the menu item.
▲ ▼ → 
  To turn the pagePress ◄ ►.
  Selectable menus (1 to 13)
For details of screen examples, 
see the next page.
Menu List 

11(EN)
  Menu items (1 to 13)
1Basic 
instructionsExplains the basic 
operations.
• Press ◄ ► to turn the 
page.P. 8
2FLAP*Sets fl aps for each indoor 
unit.P.12
3Lock indiv. 
fl ap*Fixes the fl ap of a specifi c 
air outlet.P.13
4ON/OFF 
timerSets the ON/OFF timer P.14
5Weekly timerSets the operation 
schedule on a daily basis.P.15
6Filter info*Confi rms and resets the 
time to fi lter cleaning.P.20
7Outing 
function
Prevents the room 
temperature from 
increasing to much (or 
decreasing too much) 
when no...

12(EN)
Flap Setting for Each Indoor Unit FLAP
When setting fl aps for each indoor unit
•  Flaps of all air outlets of 1 indoor unit face the same 
direction.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [FLAP].
▲ ▼ → 
3
Select the indoor unit to set.
▲ ▼ → ►
•  ALL: All units connected to the remote 
controller
e.g. (unit) ALL → 1-1 → 1-2 to 1-8
4
Select the fl ap direction.
▲ ▼ →  
(Press 2 times to fi nish.)
• Pressing ▲ or ▼...

13(EN)
Flap Setting for Each Air Outlet Lock indiv. fl ap
When setting the fl ap for each air outlet individually according to the 
room condition
•  Even if the fl ap setting  of all indoor units (P.9) or each  indoor unit (P. 12) is 
changed, the fl ap directions set here are not changed.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Lock indiv. fl ap]
▲ ▼ → 
3
Select the indoor unit to set.
▲ ▼ → ►
e.g. 1-1 → 1-2 to 1-8
4...

14(EN)
Timer Reservation ON/OFF timer
This turns ON/OFF at the specifi ed time. (e.g. Turning ON/OFF after 3 hours)
ONOFF
3 hours
OFFON
Set3 hoursOperation
 stopOperation
 stop SetSet
•  Use OFF timer for example when: Reducing electric consumption while sleeping
•  Use ON timer for example when: Operating the air conditioner according to the 
meeting start timing
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [ON/OFF timer].
▲...