Panasonic Cz Rtc3 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Cz Rtc3 Operating Instructions Manual. The Panasonic manuals for Remote Control are available online for free. You can easily download all the documents as PDF.
Page 31
31(EN)
Outing Function
This function prevents the room temperature from rising too high
(or dropping too low) when no one is in the room due to outing, etc.
•
•
• •
•
Page 32
![Page 32
32(EN)
Outing Function
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Outing function]
▲ ▼ →
3
Select [Select enable/disable]
and set to [
].
▲ ▼ → ◄ ► →
4
Select [Set lower/upper limit temp.].
▲ ▼ →
5
Set the temperature range.
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to fi nish.)](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-31.png "Page 32
32(EN)
Outing Function
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Outing function]
▲ ▼ →
3
Select [Select enable/disable]
and set to [
].
▲ ▼ → ◄ ► →
4
Select [Set lower/upper limit temp.].
▲ ▼ →
5
Set the temperature range.
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to fi nish.)")
32(EN) Outing Function 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Outing function] ▲ ▼ → 3 Select [Select enable/disable] and set to [ ]. ▲ ▼ → ◄ ► → 4 Select [Set lower/upper limit temp.]. ▲ ▼ → 5 Set the temperature range. ▲ ▼ → ► → ▲ ▼ → → (Press 2 times to fi nish.)
Page 33
![Page 33
33(EN)
Initial Settings Clock Clock type Operation lock
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
Clock
4
Set the date and time.
▲ ▼ → ► →
→ (Repeat)
Clock type
4
Select the type to display.
▲ ▼ →
→
(Press 2 times to fi nish.)
AM/PM
24 h
Operation lock
4
Select the type of lock and set to
[
].
▲ ▼ → ◄ ► →
(Press 2 times to
fi nish.)...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-32.png "Page 33
33(EN)
Initial Settings Clock Clock type Operation lock
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
Clock
4
Set the date and time.
▲ ▼ → ► →
→ (Repeat)
Clock type
4
Select the type to display.
▲ ▼ →
→
(Press 2 times to fi nish.)
AM/PM
24 h
Operation lock
4
Select the type of lock and set to
[
].
▲ ▼ → ◄ ► →
(Press 2 times to
fi nish.)...")
33(EN) Initial Settings Clock Clock type Operation lock 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Initial settings]. ▲ ▼ → 3 Select the item to set. ▲ ▼ → Clock 4 Set the date and time. ▲ ▼ → ► → → (Repeat) Clock type 4 Select the type to display. ▲ ▼ → → (Press 2 times to fi nish.) AM/PM 24 h Operation lock 4 Select the type of lock and set to [ ]. ▲ ▼ → ◄ ► → (Press 2 times to fi nish.)...
Page 34
![Page 34
34(EN)
Initial Settings
The room to which the remote controller belongs can
be easily identifi ed.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select [Controller name].
▲ ▼ →
4
Enter the name. (Repeat the same
procedure for all characters.)
▲ ▼ → ◄ ► → • Up to 16 characters.
(Space is included in the number of
characters.)
To change the character type
Select the character type with ▲ ▼
◄...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-33.png "Page 34
34(EN)
Initial Settings
The room to which the remote controller belongs can
be easily identifi ed.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select [Controller name].
▲ ▼ →
4
Enter the name. (Repeat the same
procedure for all characters.)
▲ ▼ → ◄ ► → • Up to 16 characters.
(Space is included in the number of
characters.)
To change the character type
Select the character type with ▲ ▼
◄...")
34(EN) Initial Settings The room to which the remote controller belongs can be easily identifi ed. 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Initial settings]. ▲ ▼ → 3 Select [Controller name]. ▲ ▼ → 4 Enter the name. (Repeat the same procedure for all characters.) ▲ ▼ → ◄ ► → • Up to 16 characters. (Space is included in the number of characters.) To change the character type Select the character type with ▲ ▼ ◄...
Page 35
![Page 35
35(EN)
Initial Settings Touch sound Contrast
Backlight Language
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
Touch sound
4▲ ▼ → →
(Press 2 times to fi nish.)ON
OFF
Contrast
4◄ ► → →
(Press 2 times to fi nish.)
Backlight
4◄ ► → →
(Press 2 times to fi nish.)
Language
4▲ ▼ → →
(Press 2 times to fi nish.)](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-34.png "Page 35
35(EN)
Initial Settings Touch sound Contrast
Backlight Language
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
Touch sound
4▲ ▼ → →
(Press 2 times to fi nish.)ON
OFF
Contrast
4◄ ► → →
(Press 2 times to fi nish.)
Backlight
4◄ ► → →
(Press 2 times to fi nish.)
Language
4▲ ▼ → →
(Press 2 times to fi nish.)")
35(EN) Initial Settings Touch sound Contrast Backlight Language 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Initial settings]. ▲ ▼ → 3 Select the item to set. ▲ ▼ → Touch sound 4▲ ▼ → → (Press 2 times to fi nish.)ON OFF Contrast 4◄ ► → → (Press 2 times to fi nish.) Backlight 4◄ ► → → (Press 2 times to fi nish.) Language 4▲ ▼ → → (Press 2 times to fi nish.)
Page 36
![Page 36
36(EN)
Initial Settings Password change Temp sensor
Main/sub Vent output
Contact address
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
4
Enter the password as necessary.
▲ ▼ → ► →
(Repeat)
• Select the number with ▲▼ and move to
the next fi eld with /£.
Password change
5
Enter a new password.
▲ ▼ → ► →
(Repeat)
6
Enter the password again to
confi...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-35.png "Page 36
36(EN)
Initial Settings Password change Temp sensor
Main/sub Vent output
Contact address
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
4
Enter the password as necessary.
▲ ▼ → ► →
(Repeat)
• Select the number with ▲▼ and move to
the next fi eld with /£.
Password change
5
Enter a new password.
▲ ▼ → ► →
(Repeat)
6
Enter the password again to
confi...")
36(EN) Initial Settings Password change Temp sensor Main/sub Vent output Contact address 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Initial settings]. ▲ ▼ → 3 Select the item to set. ▲ ▼ → 4 Enter the password as necessary. ▲ ▼ → ► → (Repeat) • Select the number with ▲▼ and move to the next fi eld with /£. Password change 5 Enter a new password. ▲ ▼ → ► → (Repeat) 6 Enter the password again to confi...
Page 37
![Page 37
37(EN)
Temp sensor
• Select the temperature sensor to
control the room temperature.
Temp
sensorRemote
controllerIndoor unit
Main/sub
• When 2 remote controllers are
connected to the same indoor unit,
this registers one remote controller
as [Main] and the other as [Sub].
(There is no difference in function
between Main and Sub, however,
when the remote controller sensor is
selected for the temperature sensor
setting, the [Main] sensor controls
the operation.)
Vent output
• [Set]: When the...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-36.png "Page 37
37(EN)
Temp sensor
• Select the temperature sensor to
control the room temperature.
Temp
sensorRemote
controllerIndoor unit
Main/sub
• When 2 remote controllers are
connected to the same indoor unit,
this registers one remote controller
as [Main] and the other as [Sub].
(There is no difference in function
between Main and Sub, however,
when the remote controller sensor is
selected for the temperature sensor
setting, the [Main] sensor controls
the operation.)
Vent output
• [Set]: When the...")
37(EN) Temp sensor • Select the temperature sensor to control the room temperature. Temp sensorRemote controllerIndoor unit Main/sub • When 2 remote controllers are connected to the same indoor unit, this registers one remote controller as [Main] and the other as [Sub]. (There is no difference in function between Main and Sub, however, when the remote controller sensor is selected for the temperature sensor setting, the [Main] sensor controls the operation.) Vent output • [Set]: When the...
Page 38
![Page 38
38(EN)
Ventilation Setting
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Ventilation].
▲ ▼ →
3
Select [Ventilation ON/OFF].
4
Select [ON] or [OFF]
▲ ▼ →
→ (Press 2 times to fi nish.)](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-37.png "Page 38
38(EN)
Ventilation Setting
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Ventilation].
▲ ▼ →
3
Select [Ventilation ON/OFF].
4
Select [ON] or [OFF]
▲ ▼ →
→ (Press 2 times to fi nish.)")
38(EN) Ventilation Setting 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Ventilation]. ▲ ▼ → 3 Select [Ventilation ON/OFF]. 4 Select [ON] or [OFF] ▲ ▼ → → (Press 2 times to fi nish.)
Page 39
![Page 39
39(EN)
Setting List
This provides the meanings of setting information icons.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Setting list].
▲ ▼ →
3
Select the item.
▲ ▼ ◄ ► →
• Only icons currently being displayed on
the screen are displayed here.
4
Confi rm.
Confirm, then
→ (Press 2 times to
fi nish.)](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-38.png "Page 39
39(EN)
Setting List
This provides the meanings of setting information icons.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Setting list].
▲ ▼ →
3
Select the item.
▲ ▼ ◄ ► →
• Only icons currently being displayed on
the screen are displayed here.
4
Confi rm.
Confirm, then
→ (Press 2 times to
fi nish.)")
39(EN) Setting List This provides the meanings of setting information icons. 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Setting list]. ▲ ▼ → 3 Select the item. ▲ ▼ ◄ ► → • Only icons currently being displayed on the screen are displayed here. 4 Confi rm. Confirm, then → (Press 2 times to fi nish.)
Page 40
![Page 40
40(EN)
Setting information icon list
Icon Description Page
[Lock indiv. fl ap] is set. P.13
Switching between Heat and Cool/Dry mode is prohibited (Switching to Auto
mode is also prohibited.). –
Remote control operation is restricted by a central control device. –
The indoor unit fi lter needs to be cleaned. P.20
The engine oil needs to be replaced (only when the gas heat pump air
conditioner is used).–
[ON/OFF timer] is set. P.14
[Weekly timer] is set. P.15
Energy saving operation is in process. P.8...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-39.png "Page 40
40(EN)
Setting information icon list
Icon Description Page
[Lock indiv. fl ap] is set. P.13
Switching between Heat and Cool/Dry mode is prohibited (Switching to Auto
mode is also prohibited.). –
Remote control operation is restricted by a central control device. –
The indoor unit fi lter needs to be cleaned. P.20
The engine oil needs to be replaced (only when the gas heat pump air
conditioner is used).–
[ON/OFF timer] is set. P.14
[Weekly timer] is set. P.15
Energy saving operation is in process. P.8...")
40(EN) Setting information icon list Icon Description Page [Lock indiv. fl ap] is set. P.13 Switching between Heat and Cool/Dry mode is prohibited (Switching to Auto mode is also prohibited.). – Remote control operation is restricted by a central control device. – The indoor unit fi lter needs to be cleaned. P.20 The engine oil needs to be replaced (only when the gas heat pump air conditioner is used).– [ON/OFF timer] is set. P.14 [Weekly timer] is set. P.15 Energy saving operation is in process. P.8...