Panasonic Cz Rtc3 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Cz Rtc3 Operating Instructions Manual. The Panasonic manuals for Remote Control are available online for free. You can easily download all the documents as PDF.
Page 11
11(EN) Menu items (1 to 13) 1Basic instructionsExplains the basic operations. • Press ◄ ► to turn the page.P. 8 2FLAP*Sets fl aps for each indoor unit.P.12 3Lock indiv. fl ap*Fixes the fl ap of a specifi c air outlet.P.13 4ON/OFF timerSets the ON/OFF timer P.14 5Weekly timerSets the operation schedule on a daily basis.P.15 6Filter info*Confi rms and resets the time to fi lter cleaning.P.20 7Outing function Prevents the room temperature from increasing to much (or decreasing too much) when no...
Page 12
![Page 12
12(EN)
Flap Setting for Each Indoor Unit FLAP
When setting fl aps for each indoor unit
• Flaps of all air outlets of 1 indoor unit face the same
direction.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [FLAP].
▲ ▼ →
3
Select the indoor unit to set.
▲ ▼ → ►
• ALL: All units connected to the remote
controller
e.g. (unit) ALL → 1-1 → 1-2 to 1-8
4
Select the fl ap direction.
▲ ▼ →
(Press 2 times to fi nish.)
• Pressing ▲ or ▼...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-11.png "Page 12
12(EN)
Flap Setting for Each Indoor Unit FLAP
When setting fl aps for each indoor unit
• Flaps of all air outlets of 1 indoor unit face the same
direction.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [FLAP].
▲ ▼ →
3
Select the indoor unit to set.
▲ ▼ → ►
• ALL: All units connected to the remote
controller
e.g. (unit) ALL → 1-1 → 1-2 to 1-8
4
Select the fl ap direction.
▲ ▼ →
(Press 2 times to fi nish.)
• Pressing ▲ or ▼...")
12(EN) Flap Setting for Each Indoor Unit FLAP When setting fl aps for each indoor unit • Flaps of all air outlets of 1 indoor unit face the same direction. 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [FLAP]. ▲ ▼ → 3 Select the indoor unit to set. ▲ ▼ → ► • ALL: All units connected to the remote controller e.g. (unit) ALL → 1-1 → 1-2 to 1-8 4 Select the fl ap direction. ▲ ▼ → (Press 2 times to fi nish.) • Pressing ▲ or ▼...
Page 13
![Page 13
13(EN)
Flap Setting for Each Air Outlet Lock indiv. fl ap
When setting the fl ap for each air outlet individually according to the
room condition
• Even if the fl ap setting of all indoor units (P.9) or each indoor unit (P. 12) is
changed, the fl ap directions set here are not changed.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Lock indiv. fl ap]
▲ ▼ →
3
Select the indoor unit to set.
▲ ▼ → ►
e.g. 1-1 → 1-2 to 1-8
4...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-12.png "Page 13
13(EN)
Flap Setting for Each Air Outlet Lock indiv. fl ap
When setting the fl ap for each air outlet individually according to the
room condition
• Even if the fl ap setting of all indoor units (P.9) or each indoor unit (P. 12) is
changed, the fl ap directions set here are not changed.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Lock indiv. fl ap]
▲ ▼ →
3
Select the indoor unit to set.
▲ ▼ → ►
e.g. 1-1 → 1-2 to 1-8
4...")
13(EN) Flap Setting for Each Air Outlet Lock indiv. fl ap When setting the fl ap for each air outlet individually according to the room condition • Even if the fl ap setting of all indoor units (P.9) or each indoor unit (P. 12) is changed, the fl ap directions set here are not changed. 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Lock indiv. fl ap] ▲ ▼ → 3 Select the indoor unit to set. ▲ ▼ → ► e.g. 1-1 → 1-2 to 1-8 4...
Page 14
![Page 14
14(EN)
Timer Reservation ON/OFF timer
This turns ON/OFF at the specifi ed time. (e.g. Turning ON/OFF after 3 hours)
ONOFF
3 hours
OFFON
Set3 hoursOperation
stopOperation
stop SetSet
• Use OFF timer for example when: Reducing electric consumption while sleeping
• Use ON timer for example when: Operating the air conditioner according to the
meeting start timing
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [ON/OFF timer].
▲...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-13.png "Page 14
14(EN)
Timer Reservation ON/OFF timer
This turns ON/OFF at the specifi ed time. (e.g. Turning ON/OFF after 3 hours)
ONOFF
3 hours
OFFON
Set3 hoursOperation
stopOperation
stop SetSet
• Use OFF timer for example when: Reducing electric consumption while sleeping
• Use ON timer for example when: Operating the air conditioner according to the
meeting start timing
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [ON/OFF timer].
▲...")
14(EN) Timer Reservation ON/OFF timer This turns ON/OFF at the specifi ed time. (e.g. Turning ON/OFF after 3 hours) ONOFF 3 hours OFFON Set3 hoursOperation stopOperation stop SetSet • Use OFF timer for example when: Reducing electric consumption while sleeping • Use ON timer for example when: Operating the air conditioner according to the meeting start timing 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [ON/OFF timer]. ▲...
Page 15
![Page 15
15(EN)
Timer Reservation Weekly timer overview
You can set a weekly operation schedule.
• The operation ON/OFF schedule or temperature setting schedule can be set\
by setting the day and time (e.g. Setting the operation start time to 8:00\
a.m. from every
Monday to Friday.).
How to set (Overview)
(See P.16 for setting procedure)
• Select “Day”
• Select “Time”
* Select “Operation”
• Select “Temperature”
(Only for operations other than
ON/OFF)
*Operation • ON: Starts operation with the...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-14.png "Page 15
15(EN)
Timer Reservation Weekly timer overview
You can set a weekly operation schedule.
• The operation ON/OFF schedule or temperature setting schedule can be set\
by setting the day and time (e.g. Setting the operation start time to 8:00\
a.m. from every
Monday to Friday.).
How to set (Overview)
(See P.16 for setting procedure)
• Select “Day”
• Select “Time”
* Select “Operation”
• Select “Temperature”
(Only for operations other than
ON/OFF)
*Operation • ON: Starts operation with the...")
15(EN) Timer Reservation Weekly timer overview You can set a weekly operation schedule. • The operation ON/OFF schedule or temperature setting schedule can be set\ by setting the day and time (e.g. Setting the operation start time to 8:00\ a.m. from every Monday to Friday.). How to set (Overview) (See P.16 for setting procedure) • Select “Day” • Select “Time” * Select “Operation” • Select “Temperature” (Only for operations other than ON/OFF) *Operation • ON: Starts operation with the...
Page 16
![Page 16
16(EN)
Timer Reservation Weekly timer
New registration• e.g. Start operation with 26 °C at 10:00 a.m. on every
Sunday.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Weekly timer].
▲ ▼ →
3
Enable the Weekly timer.
▲ ▼ → ◄ ► →
• Select the item with ▲▼ and select []
(enable)/[](disable) with ◄ ►.
4Select [] for all days when the
timer is used.
◄ ► → ▲ ▼ →
(Repeat)• Select the days with ◄ ► and select []
(enable)/[]...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-15.png "Page 16
16(EN)
Timer Reservation Weekly timer
New registration• e.g. Start operation with 26 °C at 10:00 a.m. on every
Sunday.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Weekly timer].
▲ ▼ →
3
Enable the Weekly timer.
▲ ▼ → ◄ ► →
• Select the item with ▲▼ and select []
(enable)/[](disable) with ◄ ►.
4Select [] for all days when the
timer is used.
◄ ► → ▲ ▼ →
(Repeat)• Select the days with ◄ ► and select []
(enable)/[]...")
16(EN) Timer Reservation Weekly timer New registration• e.g. Start operation with 26 °C at 10:00 a.m. on every Sunday. 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Weekly timer]. ▲ ▼ → 3 Enable the Weekly timer. ▲ ▼ → ◄ ► → • Select the item with ▲▼ and select [] (enable)/[](disable) with ◄ ►. 4Select [] for all days when the timer is used. ◄ ► → ▲ ▼ → (Repeat)• Select the days with ◄ ► and select [] (enable)/[]...
Page 17
17(EN) 7 Set the start time for the timer operation. hour minute ▲ ▼ → ► → ▲ ▼ → • 0:00 to 23:59 8 Select the timer operation. ▲ ▼ → • Types of timer operation ON: Starts operation with the temperature set last. OFF: Stops operation. ON & TEMP.: Starts operation with the specifi ed temperature. TEMP.: Sets the temperature to the specifi ed temperature during operation. 9 Set the temperature. ▲ ▼ → (Only for operations other than ON/OFF) 10 Confi rm the setting...
Page 18
![Page 18
18(EN)
Timer Reservation Weekly timer continued
Change/Delete
1
After steps 1 to 4 on page 16,
select the day to change or delete.
◄ ►
2
Select the schedule to change or
delete.
▲ ▼ →
3
Select [Change] or [Delete].
▲ ▼ →
4
Perform [Change] or [Delete] as
follows.
• To change the setting, following
steps 7 to 10 on page 17, set
the time, timer operation and
temperature and confi rm the
content.
• To delete the setting, select [YES].
◄ ► →
→
(Press 2 times to fi nish.)
To change or delete...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-17.png "Page 18
18(EN)
Timer Reservation Weekly timer continued
Change/Delete
1
After steps 1 to 4 on page 16,
select the day to change or delete.
◄ ►
2
Select the schedule to change or
delete.
▲ ▼ →
3
Select [Change] or [Delete].
▲ ▼ →
4
Perform [Change] or [Delete] as
follows.
• To change the setting, following
steps 7 to 10 on page 17, set
the time, timer operation and
temperature and confi rm the
content.
• To delete the setting, select [YES].
◄ ► →
→
(Press 2 times to fi nish.)
To change or delete...")
18(EN) Timer Reservation Weekly timer continued Change/Delete 1 After steps 1 to 4 on page 16, select the day to change or delete. ◄ ► 2 Select the schedule to change or delete. ▲ ▼ → 3 Select [Change] or [Delete]. ▲ ▼ → 4 Perform [Change] or [Delete] as follows. • To change the setting, following steps 7 to 10 on page 17, set the time, timer operation and temperature and confi rm the content. • To delete the setting, select [YES]. ◄ ► → → (Press 2 times to fi nish.) To change or delete...
Page 19
![Page 19
19(EN)
Timer Reservation Weekly timer continued
Timer copyThe registered schedule can be copied to other days.
This is convenient to apply the same schedule to multiple days.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Weekly timer].
▲ ▼ →
3
Select [Timer copy].
▲ ▼ →
4
Select the copy source day.
◄ ► →
5Select [] for all copy target days.
◄ ► → ▲ ▼ →
• Select the days with ◄ ► and select []
with ▲▼.
• [
]: Copy...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-18.png "Page 19
19(EN)
Timer Reservation Weekly timer continued
Timer copyThe registered schedule can be copied to other days.
This is convenient to apply the same schedule to multiple days.
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select [Weekly timer].
▲ ▼ →
3
Select [Timer copy].
▲ ▼ →
4
Select the copy source day.
◄ ► →
5Select [] for all copy target days.
◄ ► → ▲ ▼ →
• Select the days with ◄ ► and select []
with ▲▼.
• [
]: Copy...")
19(EN) Timer Reservation Weekly timer continued Timer copyThe registered schedule can be copied to other days. This is convenient to apply the same schedule to multiple days. 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select [Weekly timer]. ▲ ▼ → 3 Select [Timer copy]. ▲ ▼ → 4 Select the copy source day. ◄ ► → 5Select [] for all copy target days. ◄ ► → ▲ ▼ → • Select the days with ◄ ► and select [] with ▲▼. • [ ]: Copy...
Page 20
![Page 20
20(EN)
Filter Information
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select the item to set.
▲ ▼ →
Filter information
3
Select [Next fi lter cleaning time].
▲ ▼ →
4
Confi rm the operation time to the
next cleaning.
(Press 2 times to fi nish.)
When cleaning is immediately
necessary
The screen shown on the right is
displayed. Clean the fi lter.
(See operating instructions of the
indoor unit.)
After the fi lter is cleaned...](http://img.usermanuals.tech/thumb/58/67938/w300_cz-rtc3_operation_cv6233312187_en_om_d-19.png "Page 20
20(EN)
Filter Information
1
Display the menu screen.
To return to the previous screenPress .
To return to the top screenPress 2 times.
2
Select the item to set.
▲ ▼ →
Filter information
3
Select [Next fi lter cleaning time].
▲ ▼ →
4
Confi rm the operation time to the
next cleaning.
(Press 2 times to fi nish.)
When cleaning is immediately
necessary
The screen shown on the right is
displayed. Clean the fi lter.
(See operating instructions of the
indoor unit.)
After the fi lter is cleaned...")
20(EN) Filter Information 1 Display the menu screen. To return to the previous screenPress . To return to the top screenPress 2 times. 2 Select the item to set. ▲ ▼ → Filter information 3 Select [Next fi lter cleaning time]. ▲ ▼ → 4 Confi rm the operation time to the next cleaning. (Press 2 times to fi nish.) When cleaning is immediately necessary The screen shown on the right is displayed. Clean the fi lter. (See operating instructions of the indoor unit.) After the fi lter is cleaned...