Panasonic Cz Rtc3 Operating Instructions Manual

							11(EN)
  Menu items (1 to 13)
1Basic 
instructionsExplains the basic 
operations.
• Press ◄ ► to turn the 
page.P. 8
2FLAP*Sets fl aps for each indoor 
unit.P.12
3Lock indiv. 
fl ap*Fixes the fl ap of a specifi c 
air outlet.P.13
4ON/OFF 
timerSets the ON/OFF timer P.14
5Weekly timerSets the operation 
schedule on a daily basis.P.15
6Filter info*Confi rms and resets the 
time to fi lter cleaning.P.20
7Outing 
function
Prevents the room 
temperature from 
increasing to much (or 
decreasing too much) 
when no one is the room.P.31
8Quiet 
operation*Performs quiet operation 
for outdoor units.P.22
9Power 
consumption 
monitor
*
Confi rms the power 
consumptions on a daily, 
weekly or yearly basis.P.23
10Energy 
saving
The energy saving 
functions shown on the 
right can be set individually 
aside from the 
 (Energy 
saving) button.
11Initial 
settings
12Ventilation*
Sets ventilation operation 
including the heat 
exchange ventilation unit.P.38
13Setting listConfi rms the meanings of 
setting information icons.P.39
  No. 10 [Energy saving] details
Temp auto 
returnRestores the temperature 
after the set time has 
elapsed even if the 
temperature is changed.P.24
Temp rangeRestricts the temperature 
range that can be set.P.25
Auto shutoffSets the auto shutoff 
timer.P.26
Schedule 
peak cut

Determines the time zone 
for the energy saving 
operation.P.28
Repeat off 
timerStops operation after a 
certain period of time 
each time operation is 
performed.P.30
  No. 11 [Initial settings] details
ClockSets the present date and 
time.P.33
Clock typeSets the type of clock 
display.P.33
Controller 
nameNames the remote 
controller.P.34
Operation 
lockLocks the button 
operations.P.33
Touch 
soundTurns the operation sound 
ON/OFF.
P.35 ContrastSets the screen contrast.
BacklightSets the backlight 
brightness of the screen.
Language Sets the display language 
for the top screen.
Password 
change
Sets the administrator 
password.P.36
Temp 
sensor

Sets whether to use the 
temperature sensor of the 
remote controller or the 
indoor units.P.37
Main/sub
Set this when 2 remote 
controllers are connected.P.37
Vent 
output

Interlocks the  ON/OFF 
of the air conditioner and 
ON/OFF of the fan.P.37
Contact 
addressConfi rms the contact 
address and telephone 
number for servicing.P.37
* Depending on the model, some menus cannot 
be used. The following display appears.
The administrator password is required for 
setting. (P.36) 
						

							12(EN)
Flap Setting for Each Indoor Unit FLAP
When setting fl aps for each indoor unit
•  Flaps of all air outlets of 1 indoor unit face the same 
direction.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [FLAP].
▲ ▼ → 
3
Select the indoor unit to set.
▲ ▼ → ►
•  ALL: All units connected to the remote 
controller
e.g. (unit) ALL → 1-1 → 1-2 to 1-8
4
Select the fl ap direction.
▲ ▼ →  
(Press 2 times to fi nish.)
• Pressing ▲ or ▼ during swing 
can stop the fl ap at your 
preferred position.
• Pressing ▲ or ▼ while swing is stopped 
sets the fl ap at the specifi ed position.
When ▲ is pressed 
When ▼ is pressed 
•  3-level adjustment is possible for  Cool 
and Dry mode.
Swing
e.g. unit 1-1 e.g. unit 1-3 
						

							13(EN)
Flap Setting for Each Air Outlet Lock indiv. fl ap
When setting the fl ap for each air outlet individually according to the 
room condition
•  Even if the fl ap setting  of all indoor units (P.9) or each  indoor unit (P. 12) is 
changed, the fl ap directions set here are not changed.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Lock indiv. fl ap]
▲ ▼ → 
3
Select the indoor unit to set.
▲ ▼ → ►
e.g. 1-1 → 1-2 to 1-8
4
Select the air outlet.
▲ ▼ → ►
•  The air outlet No. changes according to 
the installation direction. Check by actual 
operation.
1
2
34
5
Select the fl ap direction.
▲ ▼ →  
(Press 2 times to fi nish.)
• Although 
 is also displayed in 
Cool and Dry mode, the actual direction 
is 
.
* For types other than the 4-way cassette 
type, the following display appears and 
this function cannot be used.
Swing
Unlock 
						

							14(EN)
Timer Reservation ON/OFF timer
This turns ON/OFF at the specifi ed time. (e.g. Turning ON/OFF after 3 hours)
ONOFF
3 hours
OFFON
Set3 hoursOperation
 stopOperation
 stop SetSet
•  Use OFF timer for example when: Reducing electric consumption while sleeping
•  Use ON timer for example when: Operating the air conditioner according to the 
meeting start timing
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [ON/OFF timer].
▲ ▼ → 
3
Select the timer type
▲ ▼ → 
•  Select [OFF timer] or [ON timer].
4
Select [Set].
▲ ▼ → 
•  To set the timer to OFF, select [Unset].
5
Set the time.
hour               minute
▲ ▼ → ► → ▲ ▼ → 
→ 
 →  
(Press 2 times to fi nish.)•  Upper limit: Stops in 72 h.
(by the 30 minutes)
Note
•  If ON timer and OFF timer are set to the same time, priority is given to OFF 
timer, and ON timer cannot be used. 
						

							15(EN)
Timer Reservation Weekly timer overview
You can set a weekly operation schedule.
•  The operation ON/OFF schedule or temperature setting schedule can be set\
 by setting the day and time (e.g. Setting the operation start time to 8:00\
 a.m. from every 
Monday to Friday.).
How to set (Overview)
(See P.16 for setting procedure)
• Select  “Day”
• Select  “Time”
* Select  “Operation”
•   Select “Temperature”
(Only for operations other than 
ON/OFF)
*Operation • ON: Starts operation with the temperature set last.
•  OFF:  Stops operation.
•  ON & TEMP: Starts operation with the speci fi ed temperature.
•  TEMP:  Sets the temperature to the specifi  ed temperature during 
operation.
Combination examples
 
 1. Stop operation earlier on “No-overtime work 
day”
8:00 17:00
8:00
22:00
ON
ON
OFFON
Weekday
No-overtime  work day
•  The setting registered for 1 day can be copied to other days. 
(P.19)
 
 2. Set the temperature higher after the fi  xed time.
8:0022:00
17:00ON (26 °C)
(28 °C)
ON & 
TEMPOFF
TEMP
 
 3. Stop operation during lunch break.
8:00 22:00
12:45
12:00ON ON
OFF
OFFOFFONON
 
 4. This Thursday is a holiday.The timer can be disabled only for the speci fi ed days with the 
registered schedules kept. (P.16)
• Disable (
) the timer of the specifi  c Thursday which falls on 
a holiday. 
• Enable (
) the timer after the holiday is over. 
						

							16(EN)
Timer Reservation Weekly timer
New registration•  e.g. Start operation with 26 °C at 10:00 a.m. on every 
Sunday.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Weekly timer].
▲ ▼ → 
3
Enable the Weekly timer.
▲ ▼ → ◄ ► → 
•  Select the item with ▲▼ and select []
(enable)/[](disable) with ◄ ►.
4Select [] for all days when the 
timer is used.
◄  ► → ▲ ▼ → 
(Repeat)•  Select the days with ◄ ► and select [] 
(enable)/[] (disable) with ▲ ▼.
5
Select the day for the timer setting.
◄ ►
6
Select the fi eld to register the timer 
setting.
▲ ▼ → 
•  Up to 8 settings are available for each 
day.
•  After registration, the items are arranged 
in time series automatically. 
						

							17(EN)
7
Set the start time for the timer 
operation.
hour               minute
▲ ▼ → ► → ▲ ▼ → 
•  0:00 to 23:59
8
Select the timer operation.
▲ ▼ → 
•  Types of timer operation
  ON:  Starts operation with the 
temperature set last.
  OFF: Stops operation.
  ON & TEMP.:  Starts operation with the 
specifi ed temperature.
  TEMP.:  Sets the temperature to the 
specifi ed temperature during 
operation.
9
 Set the temperature.
▲ ▼ → 
(Only for operations other than ON/OFF)
10
Confi rm the setting content.
Confirm and press  
.
(Press 2 times to 
fi nish.)
  To register additionally
Repeat from step 6 without pressing 
.
  To copy the setting content to other 
days (P.19)
To set the timer to OFFStarting with step 1, select [-] in step 3 and 
press  2 times.
To set the timer to OFF for 
specifi ed days after registration
(national holidays, etc.)
Starting with step 1, set [] for OFF days in 
step 4 and press 
 2 times. 
						

							18(EN)
Timer Reservation Weekly timer continued
Change/Delete
1
After steps 1 to 4  on page 16, 
select the day to change or delete.
◄ ►
2
Select the schedule to change or 
delete.
▲ ▼ → 
3
Select [Change] or [Delete].
▲ ▼ → 
4
Perform [Change] or [Delete] as 
follows.
• To change the setting, following  
steps 7 to 10 on page 17, set 
the time, timer operation and 
temperature and confi rm the 
content.
• To delete the setting, select [YES].
◄ ► → 
 →  
(Press 2 times to fi nish.)
  To change or delete settings repeatedly: Repeat from step 1 without pressing .
Note
  To delete all schedules of selected days
1Select the day in step 1  above and 
press 
.
2Select [Delete all: ] with ▲ ▼ and 
press 
.
3Select [YES] with ◄ ► and press 
. 
						

							19(EN)
Timer Reservation Weekly timer continued
Timer copyThe registered schedule can be copied to other days. 
This is convenient to apply the same schedule to multiple days.
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Weekly timer].
▲ ▼ → 
3
Select [Timer copy].
▲ ▼ → 
4
Select the copy source day.
◄ ► → 
5Select [] for all copy target days.
◄ ► → ▲ ▼ → 
•  Select the days with ◄ ► and select [] 
with ▲▼.
• [
]: Copy source 
6
Select [YES]. 
◄ ► → 
 →  
(Press 2 times to fi nish.) 
						

							20(EN)
Filter Information
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select the item to set.
▲ ▼ → 
Filter information
3
Select [Next fi lter cleaning time].
▲ ▼ → 
4
Confi rm the operation time to the 
next cleaning.
(Press 2 times to fi nish.)
  When cleaning is immediately 
necessary
The screen shown on the right is 
displayed. Clean the fi lter.
(See operating instructions of the 
indoor unit.)
  After the fi lter is cleaned
Select [Filter sign reset] in step 3 
above and select [YES].
◄ ► → 
 →  
(Press 2 times to 
fi nish.)
(The fi lter cleaning time count is 
reset.)