Panasonic Cz Rtc3 Operating Instructions Manual

21(EN)
Note
•  Depending on the model, [Filter 
info] cannot be used. In this case, a 
message is displayed as shown on 
the right.
•  When the cleaning time comes, the 
icon shown on the right appears on 
the top screen. 

22(EN)
Quiet Operation/Power Consumption Monitor
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select the item to set.
▲ ▼ → 
Quiet operation
3
Enter the password.
▲  ▼ → ► → 
 
(Repeat)
4Set [Select enable/disable] to [].
▲ ▼ → ◄ ►
•  Select the item with ▲ ▼ and select []/
[] with ◄ ►.
5
Select [Quiet time].
▲ ▼ → 
6
Set the time to perform quiet 
operation.
▲  ▼ → ► → 
 →  
     (Repeat)(Press 2 times 
to fi nish.) 

23(EN)
Power consumption monitor
3
Select the period to display.
▲ ▼ → 
 
4
Confi rm the information.
 (Press 2 times to fi nish.)
Note
•  Depending on the model, [Quiet operation] and 
[Power consumption monitor] cannot be used. In this case, a 
message is displayed as shown on the right.
•  Using the quiet operation function may deteriorate the performance to reduce the operation 
sound.
•  The power consumption shows an approximate calculation result, which may differ from the 
measurement result...

24(EN)
Energy Saving
  Temp auto return
Restoring the changed temperature to the originally set temperature 
automatically after a specifi ed time elapses. 
(e.g. Only when a guest comes)
  Temp range
Restricting the temperature range that can be set. (Temperatures outside the 
range cannot be set.)
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Energy saving].
▲ ▼ → 
3
Select the item to set.
▲ ▼ → 
Temp auto return
4Select...

25(EN)
Temp range
4Select the item and set to [].
▲ ▼ → ◄ ► → 
 
5
Set the temperature range.
▲ ▼ → ► → ▲ ▼ → 
 →  
(Press 2 times to fi nish.)
Setting range
•  Cool/Dry: 18 °C to 30 °C
•  Heat: 16 °C to 30 °C
•  Auto: 17 °C to 27 °C
  To set in series     Repeat from step 4 without pressing .
Note
•  Temp auto return
When [Return type] is set to [Saving], this functions only when the temperature set in step 
5 saves more energy than the changed temperature.
e.g. When Cool 26 °C is set and the...

26(EN)
Energy Saving
  Auto shutoff
When the operation is stopped at a specifi ed time (e.g. closing time) and 
resumed afterwards, this function detects the operation status at regular 
time intervals and stops operation automatically.
Detect the operation status at regular time intervals and stop the operation automatically.
(e.g. 60 min)
ON
OFF 21:00 22:08DetectDetect Detect
23:009:00 60 min 60 min 60 min
Closing timeOpening time
Auto shutoff in effect
Leaves the 
shop without 
turning off 
A/C.If...

27(EN)
Stop time
Time to stop operation (Time when Auto shutoff is activated)
5
Set.
hour               minute
▲ ▼ → ► → ▲ ▼ → 
 →  
(Press 2 times to fi nish.)
End time
Time when Auto shutoff stops
5
Set.
hour               minute
▲ ▼ → ► → ▲ ▼ → 
 →  
(Press 2 times to fi nish.)
Timer
Time interval to detect operation status after 
[Stop time]
5
Set.
▲ ▼ → 
 →  
(Press 2 times to fi nish.)
•  10 min to 180 min
(by the 10 min) 

28(EN)
Energy Saving
  Schedule peak cut
This reduces the operation capacity for 
the specifi ed time period.
1
Display the menu screen.
  To return to the last screenPress .
  To return to the top screenPress  2 times.
2
Select [Energy saving].
▲ ▼ → 
3
Select [Schedule peak cut].
▲ ▼ → 
4
Enter the password.
▲  ▼ → ► → 
(Repeat)
5Set [Select enable/disable] to [].
▲ ▼ → ◄ ►
6
Select [Set schedule].
▲ ▼ → 
 
7
Change the setting.
Select the fi eld to register.
▲ ▼ → 
 
Large
Small
11:00 13:00 16:00...

29(EN)
8
Set the start time and end time.
▲  ▼ → ► → ▲ ▼ → 
(Repeat)
9
Select the operation capacity.
▲ ▼ → 
 →  
(Press 2 times to fi nish.)
  To set in seriesRepeat from step 4 without pressing .
  To change• Select the fi eld to change in step 7 
above.
• Select [Change].
▲ ▼ → 
•  Following the above steps 8 to 9, 
select the start time, end time and 
operation capacity.
  To delete• Select the fi eld to delete in step 7 
above.
• Select [Delete].
▲ ▼ → 
• Select [YES].
◄ ► →  →  
(Press 2 times to fi...

30(EN)
Energy Saving
  Repeat off timer
This stops operation after a certain 
period of time each time operation 
is performed.
(e.g. When forgetting turning off)
1
Display the menu screen.
  To return to the previous screenPress .
  To return to the top screenPress  2 times.
2
Select [Energy saving].
▲ ▼ →  
3
Select [Repeat off timer] and set to 
[
].
▲ ▼ → ◄ ► → 
4
Set the timer to stop.
▲ ▼ → 
 →  
(Press 2 times to fi nish.)
•  10 min to 180 min
(by the 10 min)
ON
OFF 60 min
Finishes 
working...