Panasonic Color Cctv Camera Wv Cs574 Operating Instructions

-51-
Menu
TOP MENU
SPECIAL 1
CAMERA MENU
SPECIAL 2HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
PASSWORD LOCK
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
CAMERA ID
ALC/MANUAL
BLC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
CHROMA GAIN
AP GAIN
PEDESTAL
RESOLUTION
DNROFF
OFF
OFF
AUTO PAN
ON
OFF
OFF
ON
OFF
STOP
OFF
ON
OFF
OFF
0°
OFF
ALC
OFF
AUTO
ON (MID)
OFF
INT
ATW1
OFF
AUTO L
••••I••••
••••
I••••
•••
I•••••
HUE••••I••••
NORMAL
LOW2...

Auto Focus Zoom Ratio Focus Speed 
F1.6 - 22, CLOSE Focal Length
BLC selectable ON/OFF (SETUP MENU)
x 22 +digital zoom x10 approx. 4.5 s (TELE/WIDE) in manual mode
approx. 5 s (FAR/NEAR) in manual mode
automatic (open/close is possible)/manual
1 : 1.6 (WIDE) - 3.0 (TELE)
3.79 - 83.4 mm
2.6 ° - 52.3 °
2.0 ° - 39.9 °
1/60 (OFF), AUTO, 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s Zoom Speed
Iris
Maximum Aperture Ratio
Angular Field
of ViewH
V
Electronic Shutter
Iris Range
MAX 32 times,...

-53-
Controls Panning Range
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.360 ° endless
possible (in auto-pan mode)
manual/sequential position/sort position/auto pan
manual : approx. 0.1 °/s - 120 °/s 8-steps/16-steps/64-steps
sequence position : maximum approx. 300 °/s
0°to 180 ° (–5 ° to 185 ° at 5 ° tilt angle setting)
manual/sequential position/sort position
manual : approx. 0.1 °/s - 120 °/s. 8-steps/16-steps/64-steps
sequential position :...

-54-
SHORTCUTS
Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTION button. 
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the cam-
era to a preset position by inputting the applicable position number on the 10-key pad. 
Notes:
•Turn off digital flip before...

-55-
Controller Operation Setting 
[1] + [7] + [0] + [CAM FUNCTION] IRIS: CLOSE
[1] + [7] + [1] + [CAM FUNCTION] SHUTTER: ON
[1] + [7] + [2] + [CAM FUNCTION] SHUTTER: OFF
[1] + [7] + [3] + [CAM FUNCTION] Increases shutter speed one step. 
[1] + [7] + [4] + [CAM FUNCTION] Decreases shutter speed one step. 
[1] + [7] + [5] + [CAM FUNCTION] AGC: ON
[1] + [7] + [6] + [CAM FUNCTION] AGC: OFF
[1] + [7] + [7] + [CAM FUNCTION] SENS UP: FIX ON
[1] + [7] + [8] + [CAM FUNCTION] SENS UP: FIX OFF
[1] + [7] + [9] +...

-56-
TROUBLESHOOTING
Before requesting service, check the following symptoms to see if you can solve the problem yourself. 
If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are not
covered here, contact a quality service person or system installer. 
Reference PagesCause and Recommended ActionProblem
No picture (dark screen)
White picture
Out of focus picture
Digital noise in the picture 
Poor picture color
•Is the camera connected correctly? Check...

-57-
Afterimages in the picture
White specks in the picture
Menu does not open. 
Menu settings will not
change.
I forgot the password. 
•Check the DNR setting.
•Use the PIX OFF function to perform blemish com-
pensation. 
•Is the camera connected correctly? See the operat-
ing instructions that come with the system controller
you are using. 
•Is the password lock function turned on?
49
49
–
34
•Are camera communication settings configured cor-
rectly?11
-13
18
-19
•Contact a quality service person or...

-58-
Picture is different from the
position setting.
Upper part of the picture is
black when the camera is in
a horizontal orientation. 
Reference PagesCause and Recommended ActionProblem
•Adjust the picture using the preset menu and a
scene file. 
•This is caused by the cameras internal cover. It
does not indicate malfunction.
30
_
Camera suddenly starts to
pan by itself.
•If the cleaning function is turned on, this is normal
does not indicate malfunction. Check the CLEAN-
ING settings. 
•If the...

Panasonic Canada Inc.5770 Ambler Drive,Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales CompanyDivision of Panasonic Puerto Rico Inc.San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North AmericaSecurity Systemswww.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey...