Panasonic Color Cctv Camera Wv Cs574 Operating Instructions

							-51-
Menu
TOP MENU
SPECIAL 1
CAMERA MENU
SPECIAL 2HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
PASSWORD LOCK
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
CAMERA ID
ALC/MANUAL
BLC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
CHROMA GAIN
AP GAIN
PEDESTAL
RESOLUTION
DNROFF
OFF
OFF
AUTO PAN
ON
OFF
OFF
ON
OFF
STOP
OFF
ON
OFF
OFF
0°
OFF
ALC
OFF
AUTO
ON (MID)
OFF
INT
ATW1
OFF
AUTO L
••••I••••
••••
I••••
•••
I•••••
HUE••••I••••
NORMAL
LOW2
Item Setting Menu
PRESET MENU
AUTO PAN SCENE FILE
RS485 SET UP
ALARM IN/OUTPRESET ID
ALC/MANUAL
BLC
DWELL TIME
SCENE FILE
PRESET SPEED
SPEED
PAN LIMIT
ENDLESS
DWELL TIME
UNIT NUMBER
SUB ADDRESS
BAUD RATE
DATA BIT
PARITY CHECK
STOP BIT
XON/XOFF
WAIT TIME
ALARM DATA
DELAY TIME
ALARM IN1
ALARM IN2
ALARM IN3
ALARM IN4
CNT-CLS 1
TIME OUT
CNT-CLS 2
COAX ALM OUTON
ALC
OFF
10S
1
••••••••I
SHUTTER AUTO
AGC ON (MID)
SENS UP OFF
WHITE BAL ATW1
MOTION DET OFF
AF MODE MANUAL L
••••I••••
OFF
OFF
1S
1
1
19200
8
NONE
1
NOT USE
OFF
AUTO2
OFF
OFF
OFF
OFF
OFF
OFF
100MS
OFF
OFF
Item Setting
Factory Default Setting 
						

							Auto Focus Zoom Ratio Focus Speed 
F1.6 - 22, CLOSE Focal Length
BLC selectable ON/OFF (SETUP MENU)
x 22 +digital zoom x10 approx. 4.5 s (TELE/WIDE) in manual mode
approx. 5 s (FAR/NEAR) in manual mode
automatic (open/close is possible)/manual
1 : 1.6 (WIDE) - 3.0 (TELE)
3.79 - 83.4 mm
2.6 ° - 52.3 °
2.0 ° - 39.9 °
1/60 (OFF), AUTO, 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s Zoom Speed
Iris
Maximum Aperture Ratio
Angular Field
of ViewH
V
Electronic Shutter
Iris Range
MAX 32 times, AUTO/FIX Sens Up
ON (LOW)/ON (MID)/ON (HIGH)/OFF AGC
Cleaning2 outputs (ALARM/AUX1, AUX2) open collector - output max. 16 V DC 
100 mA OFF (OPEN)/ON (0 V) Alarm OUT4 inputs (ALARM IN 1 - 4) pulled up to 5.0 V DC OFF (open or 4 V DC - 5 V DC)/
ON (0 V 0.2 mA) Alarm IN
Power Source
MANUAL/AUTO
OFF/SEQ/SORT/AUTO PAN/PATROL
SEQ/SORT/AUTO PAN/PATROL PLAY
ON/OFF
preset ID, camera ID, area title : up to 16 characters
ON/OFF
ON/OFF, up to 8 zones
ON/OFF
LEARN/PLAY/STOP, up to 60 seconds
ON/OFF
Image Hold ON/OFF Auto Mode
Auto Pan Key
Digital Flip
Camera IDMotion Detector
Privacy Zone
Proportional PAN/TILT
Patrol
Dimensions24 V AC, 60 Hz
120 (D) x 191 (H) mm
(4-3/4 (D) x 7-1/2 (H))
approx. 2 k
g(4.4 lbs) –10 °C - +50 °C (14 °F - 122 °F) 
(Recommended operating temperature: +35 °C (95 °F) or less) 13 W Power Consumption
Ambient Operating
Temperature
Weight
-52- Effective Pixels
SPECIFICATIONS
Horizontal Scanning
Frequency3.65 mm (H) x 2.74 mm (V), 1/4 in. 768 (H) x 494 (V)WV-CS574
15.734 kHz internal/line-lock / multiplexed vertical drive (VD2)
59.94 Hz
1.0 V[P-P] NTSC composite/75 Ω
more than 480 lines at center (C/L, NORMAL), more than 510 lines at center 
(C/L, HIGH)
more than 350 lines at center
50 dB (AGC OFF, weight on)
1 lx (0.1 foot-candle) C/L at SENS UP OFF (AGC HIGH) Scanning Area
Synchronization
Vertical Scanning
Frequency
Video Output
Horizontal Resolution
Vertical Resolution
Signal-to-Noise Ratio
Minimum Illumination 
						

							-53-
Controls Panning Range
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.360 ° endless
possible (in auto-pan mode)
manual/sequential position/sort position/auto pan
manual : approx. 0.1 °/s - 120 °/s 8-steps/16-steps/64-steps
sequence position : maximum approx. 300 °/s
0°to 180 ° (–5 ° to 185 ° at 5 ° tilt angle setting)
manual/sequential position/sort position
manual : approx. 0.1 °/s - 120 °/s. 8-steps/16-steps/64-steps
sequential position : maximum approx. 300 °/s
pan/tilt, lens, 32 preset positions, home position Panning Angle Setting
Panning Mode
Panning Speed
Tilting Range
Tilting Mode
Tilting Speed 
						

							-54-
SHORTCUTS
Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTION button. 
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the cam-
era to a preset position by inputting the applicable position number on the 10-key pad. 
Notes:
•Turn off digital flip before registering preset positions. If NO REGS.; FLIP ON appears, do the setting again. 
•Shortcuts may not be performed if they are executed while a pan, tilt, zoom, or focus operation is in progress. 
•Shortcuts 1 through 32, 169, 170 can be saved as part of a patrol routine. 
•Except for shortcuts 169 and 170, executing any shortcut during patrol routine PLAY will cause the PLAY operation
to stop. 
Controller Operation Setting 
[6] + [5] + [CAM FUNCTION] AUTO PAN ON
[6] + [6] + [CAM FUNCTION] AUTO PAN OFF
[6] + [7] + [CAM FUNCTION] Increases AUTO PAN speed one step. 
[6] + [8] + [CAM FUNCTION] Decreases AUTO PAN speed one step. 
[6] + [9] + [CAM FUNCTION] Sets AUTO PAN start point.
[7] + [0] + [CAM FUNCTION] Sets AUTO PAN end point.
[7] + [1] + [CAM FUNCTION] AUTO MODE: OFF
[7] + [2] + [CAM FUNCTION] AUTO MODE: SEQ ON
[7] + [3] + [CAM FUNCTION] AUTO MODE: SORT ON
[7] + [4] + [CAM FUNCTION] Reverses AUTO PAN range. 
[7] + [6] + [CAM FUNCTION] ENDLESS: ON
[7] + [7] + [CAM FUNCTION] ENDLESS: OFF
[7] + [8] + [CAM FUNCTION] DIGITAL FLIP: ON
[7] + [9] + [CAM FUNCTION] DIGITAL FLIP: OFF
[8] + [0] + [CAM FUNCTION] PROPO.P/T: ON
[8] + [1] + [CAM FUNCTION] PROPO.P/T: OFF
[8] + [4] + [CAM FUNCTION] BLC: ON 
[8] + [5] + [CAM FUNCTION] BLC: OFF
[8] + [6] + [CAM FUNCTION] AF MODE: AUTO
[8] + [7] + [CAM FUNCTION] AF MODE: MANUAL
[8] + [8] + [CAM FUNCTION] Performs auto focus. 
[8] + [9] + [CAM FUNCTION] Moves to home position. 
[9] + [3] + [CAM FUNCTION] CAMERA ID: ON
[9] + [4] + [CAM FUNCTION] CAMERA ID: OFF
[9] + [5] + [CAM FUNCTION] AREA TITLE: ON (NESW)
[9] + [6] + [CAM FUNCTION] AREA TITLE: ON (USER)
[9] + [7] + [CAM FUNCTION] AREA TITLE: OFF
[1] + [0] + [0] + [CAM FUNCTION] Adjusts camera position (REFRESH) 
[1] + [0] + [1] + [CAM FUNCTION] Stores preset to first available preset number (1 to 32). 
[1] + [3] + [2] + [CAM FUNCTION]
[1] + [6] + [5] + [CAM FUNCTION] PATROL: PLAY
[1] + [6] + [6] + [CAM FUNCTION] PATROL: STOP
[1] + [6] + [7] + [CAM FUNCTION] PATROL: LEARN start
[1] + [6] + [9] + [CAM FUNCTION] IRIS: OPEN 
						

							-55-
Controller Operation Setting 
[1] + [7] + [0] + [CAM FUNCTION] IRIS: CLOSE
[1] + [7] + [1] + [CAM FUNCTION] SHUTTER: ON
[1] + [7] + [2] + [CAM FUNCTION] SHUTTER: OFF
[1] + [7] + [3] + [CAM FUNCTION] Increases shutter speed one step. 
[1] + [7] + [4] + [CAM FUNCTION] Decreases shutter speed one step. 
[1] + [7] + [5] + [CAM FUNCTION] AGC: ON
[1] + [7] + [6] + [CAM FUNCTION] AGC: OFF
[1] + [7] + [7] + [CAM FUNCTION] SENS UP: FIX ON
[1] + [7] + [8] + [CAM FUNCTION] SENS UP: FIX OFF
[1] + [7] + [9] + [CAM FUNCTION] Increases electronic sensitivity enhancement (FIX) one step. 
[1] + [8] + [0] + [CAM FUNCTION] Decreases electronic sensitivity enhancement (FIX) one step. 
[1] + [8] + [1] + [CAM FUNCTION] SENS UP: AUTO ON
[1] + [8] + [2] + [CAM FUNCTION] SENS UP: AUTO OFF
[1] + [8] + [3] + [CAM FUNCTION] Increases electronic sensitivity enhancement (AUTO) one step. 
[1] + [8] + [4] + [CAM FUNCTION] Decreases electronic sensitivity enhancement (AUTO) one step. 
[1] + [8] + [5] + [CAM FUNCTION] Increases line lock phase (FINE) one step. 
[1] + [8] + [6] + [CAM FUNCTION] Decreases line lock phase (FINE) one step. 
[1] + [8] + [7] + [CAM FUNCTION] Pans 180 °.
[1] + [8] + [8] + [CAM FUNCTION] CLEANING: ON
[1] + [8] + [9] + [CAM FUNCTION] CLEANING: OFF
*Do not do this operation with the previous dome type camera models (WV-CS850 series, WV-CS854, WV-CS854E
series, WV-CW860 series, WV-CW864, WV-CW864E series, and WV-CS564), doing so may cause a malfunction. 
						

							-56-
TROUBLESHOOTING
Before requesting service, check the following symptoms to see if you can solve the problem yourself. 
If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are not
covered here, contact a quality service person or system installer. 
Reference PagesCause and Recommended ActionProblem
No picture (dark screen)
White picture
Out of focus picture
Digital noise in the picture 
Poor picture color
•Is the camera connected correctly? Check the oper-
ating instructions that come with your system con-
troller.
•Is the lens iris open?
•Is the dome cover or lens of the camera dirty? If so,
clean them. 
•The slip ring may be dirty. Do you have the cleaning
function turned on?
•Check the white balance setting. 
•Is FIX selected for the electronic sensitivity
enhancement (SENS UP) setting?
•Is the lens iris closed?
Execute the iris reset from the system controller you
are using. 
•Is the camera set up for a fixed shutter speed?
–
29-30
6
41
46-47
•Use the special setup menu to adjust picture quali-
ty.
49
•Is the dome cover or lens of the camera dirty? If so,
clean them. 
6 •Is the camera set up correctly?
42 •Is MANUAL selected for the auto focus mode?
48
•Is the object one that is not compatible with auto
focus? For such objects, focus manually.
48 30, 4529-30
30, 44 
						

							-57-
Afterimages in the picture
White specks in the picture
Menu does not open. 
Menu settings will not
change.
I forgot the password. 
•Check the DNR setting.
•Use the PIX OFF function to perform blemish com-
pensation. 
•Is the camera connected correctly? See the operat-
ing instructions that come with the system controller
you are using. 
•Is the password lock function turned on?
49
49
–
34
•Are camera communication settings configured cor-
rectly?11
-13
18
-19
•Contact a quality service person or system installer.–
Pan, tilt, zoom, or focus do
not work. 
The camera movement
modes (OFF, SEQ, SORT,
AUTO PAN, PATROL) do not
work. 
The camera movement mode
(OFF, SEQ, SORT, AUTO
PAN, PATROL) setting
changes.
Camera position is different
from the preset position set-
ting.
•Is the camera connected correctly? See the operat-
ing instructions that come with the system controller
you are using. 
–
•The camera has a pan limit function. Check the PAN
LIMIT settings. 33
•The motor or lens may be worn. Contact a quality
service person or system installer. –
•Check the self return function. 31
•Check the ALARM IN settings. 40
•Check the recover time setting of the motion detec-
tor. 30
•Check the self return function. 31
•Perform REFRESH from the special setup menu. 50
Reference PagesCause and Recommended ActionProblem 
						

							-58-
Picture is different from the
position setting.
Upper part of the picture is
black when the camera is in
a horizontal orientation. 
Reference PagesCause and Recommended ActionProblem
•Adjust the picture using the preset menu and a
scene file. 
•This is caused by the cameras internal cover. It
does not indicate malfunction.
30
_
Camera suddenly starts to
pan by itself.
•If the cleaning function is turned on, this is normal
does not indicate malfunction. Check the CLEAN-
ING settings. 
•If the cleaning function is not turned on, this symp-
tom could be due to noise. 
41
Power cord sheathing is
damaged. 
Power cord, connectors, or
power plug becomes hot
during operation. 
Power cord becomes warm
or hot when it is bent or
stretched during use. 
•The power cord, connector, or power plug is damaged. Continued
use creates the risk of electric shock and fire. Immediately unplug the
power plug and contact a qualified service person or system installer
for servicing. 
●Periodically check the power cord and plug. 
Reference PagesCause and Recommended ActionProblem 
						

							Panasonic Canada Inc.5770 Ambler Drive,Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales CompanyDivision of Panasonic Puerto Rico Inc.San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North AmericaSecurity Systemswww.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094Zone Office
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094Central: 1707 N. Randal Road, Elgin, IL 60123Southern: 1225 Northbrook Parkway, Suwanee, GA 30024Western: 6550 Katella Ave., Cypress, CA 90630
Printed in Japan
© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N0305-1055       3TR003479BAA       Imprimé au Japon