Panasonic Color Cctv Camera Wv Cs574 Operating Instructions

-21-
Position Setting (P. 27)
Dwell Time Setting (P. 30)
Chroma Level Setting (P. 49)
Aperture Level Setting (P. 49)
Pedestal Level Setting (P. 49)
Resolution (P. 49)
HUE Level Setting (P. 49)
Digital Noise Reduction 
(P. 49)
PIX OFF Setting (P. 49)
BLC OFF (P. 44)
Preset ID Editing (P. 27)
BLC ON (P. 43)
Manual Iris Adjustment (P. 43)
Shutter Speed (P. 44)
Gain Control (P. 45)
Electronic Sensitivity
Enhancement (P. 45)
White Balance (P. 46)
Motion Detector (P. 47)
Auto Focus (P. 48)
Unit Number (P. 19)...

-22-
■Setup Menu Description
●Presetting
(1) Position (POSITION SET)
Aligns the camera position and focal point by pan-
ning, tilting, zooming and focusing.
See page 27for the setting.
(2) Preset Identification (PRESET ID)
Assigns the name for preset IDs (identification of up
to 16 alphanumeric characters) and can be
switched on or off on the monitor screen.
See page 28for the setting.
(3) Light Control (ALC/MANUAL)
Selects the ALC or MANUAL mode for adjusting the
lens iris.
See page 29for the setting....

-23-
●Special 1 Menu
(1) Privacy Zone (PRIVACY ZONE)
This setting is used for masking unwanted zones,
hiding them from display on the monitor screen.
Up to 8 zones can be registered. Submenus are
provided for zone number selection and parameter
setting. See page 35for details.
(2) Proportional Pan-Tilt Speed (PROPO. P/T)
If ON is selected, the pan-tilt speed changes auto-
matically corresponding to the zoom ratio. For
example, the pan-tilt speed slows down when the
camera zooms in. See page 36for...

-24-
•ALC Mode with BLC OFF
In this mode, the picture is divided into 48 areas. If
there is a source of brightness that interferes with
the clarity of the picture in these masks, correspon-
ding areas mask the light to keep the clarity of the
picture.
Generally, when a light from the background is too
strong such as a spotlight, all objects except the
main object in the picture are displayed darker
because the lens iris is adjusted with respect to
strong brightness. This model ignores strong bright-
ness...

-25-
(9) Auto Focus (AF MODE)
The camera adjusts the focus automatically by sens-
ing the center of the picture. S, M and L stand for
the size of the sensing area: Small, Middle and
Large.
See page 48for details.
MANUAL S, M, L:Auto-focus is activated only when
the button that is assigned for the auto-focus
function on the controller is pressed.
AUTO S, M, L:Auto-focus is activated automatically
while a manual pan, tilt or zoom operation is per-
formed.
Note:
If SENS UP is set to ON except x2 FIX or x2...

■Preset Menu
●Preset Menu Display
1.Displaying the preset menu directly
(1) Move the cursor to PRESET 1 
Oand select the
position number with the joystick.
(2) Press the CAM (SET) button.
The preset setting menu appears on the monitor
screen.
2.Displaying the preset menu from the PRESET NUM-
BER SET menu
(1) Move the cursor to MAP 
Oand press the CAM
(SET) button.
The PRESET NUMBER SET menu appears on the
monitor screen.
(2) Move the cursor to the position number to be set
and press the CAM (SET)...

-27-
Notes:
•The * mark indicates that the position number
has been preset.
•The character H refers to the home position.
•The second line from the bottom shows the pre-
set ID corresponding to the selected number.
DOOR next to ID in the example shown right is
for preset position number 1.
•Preset numbers 1 to 4 are linked to alarm inputs
1 to 4 respectively. If alarm input 1 comes in, the
camera turns to preset position 1, and to other
positions according to alarm input 2, 3 or 4.
●Position Setting...

●Preset Identification Setting (PRESET
ID)
1.Move the cursor to PRESET ID on the preset setting
menu and select ON or OFF with the joystick.
The factory default setting is OFF.
ON:Preset ID appears on the monitor screen.
OFF:Preset ID does not appear.
2.Press the CAM (SET) button to display the preset ID
setting menu.
To Enter a New Preset ID
(1) Move the cursor to the desired character using
the joystick, and press the CAM (SET) button.
(2) The selected character appears in the editing
area. (The...

-29- (2) Display the most prospective ID.
(3) Follow the step To Change an Entered Preset
ID if necessary.
To Change an Entered Preset ID
(1) Move the pointer to the character to be edited in
the editing area with the joystick.
(2) Select a new character with the joystick.
(3) Press the CAM (SET) button to determine the
Preset ID.
To Delete an Entered Preset ID
Move the cursor to RESET and press the CAM (SET)
button.
To Set a Display Position for a Preset ID
(1) Move the cursor to POSI and press the CAM...

See the pages below for the settings respectively.
Shutter speed: page 44
AGC: page 45
Electronic sensitivity enhancement: page 45
White balance: page 46
Motion detector: page 47
Auto focus: page 48
●Preset Speed Setting (PRESET
SPEED)
Move the cursor to PRESET SPEED and select a speed
with the joystick.
●To Return to the Preset Number Set
Menu
Move the cursor to RET and press the CAM (SET) but-
ton. The PRESET NUMBER SET menu appears with the
* mark on the right of the preset position number.
●To Return...