Panasonic Color Cctv Camera Wv Cs574 Operating Instructions

-41-
●Cleaning (CLEANING)
With CLEANING in the ON position, the camera’s built-
in electromechanical contacts are cleaned at regular
intervals (approx. every 7 days).
A dry contact adversely affects picture quality and
motors operation.
1. Move the cursor to CLEANING and select ON or
OFF with the joystick.
ON:The contacts are cleaned for approx. 1 minute.
CLEANING disappears when the cleaning
process is completed.
OFF:No contact cleaning.
Note:
To download or upload preset data to the system
controller,...

■Camera Setting
●To Display the Camera Setting Menu
Move the cursor to CAMERA O, and press the CAM
(SET) button. The camera setting menu appears.
●Camera Identification (CAMERA ID)
1. Move the cursor to CAMERA ID, and select ON to
display the camera identification with the joystick.
2. Follow the steps below to edit the camera ID char-
acters.
2-1 Move the cursor to CAMERA ID and press the
CAM (SET) button to display the character edit-
ing menu.
2-2 Move the cursor to the character you want to edit
or...

CAM1
     CAMERA ID
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-*/%$
    SPACE
         POSI RET RESET
    CAM1............
    
     CAMERA ID
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-*/%$
    SPACE
         POSI RET RESET
    CAM1............
    
-43- 3-2 Decide the position of the camera ID with the joy-
stick. Press the MON (ESC) button to fix the posi-
tion, and return to the character editing menu.
Notes:
•When you want the...

6. If you want to change the picture contrast, move the
I cursor for LEVEL and adjust the level.
Note:
If operation of the controllers IRIS (OPEN, CLOSE)
buttons during operation is done after the menu is
closed, the LEVEL on the CAMERA menu is reflect-
ed and stored for these settings. However, if the
camera is in a preset position, it is reflected as a
parameter of the preset position. To return to the ini-
tial factory default level, hold down the system con-
trollers 
Abutton.
7. Move the cursor to...

-45- •In the AUTO mode, an object is clearly imaged
under highlighted conditions by using the combina-
tion technology of iris and shutter functions.
Note:
When the selected shutter speed caused flicker
on condition that fluorescent lamps stay on,
change this setting to OFF.
●Gain Control [AGC ON (LOW/ MID/
HIGH)/OFF]
Move the cursor to AGC and select ON (LOW), ON
(MID), ON (HIGH) or (OFF) with the joystick.
Notes:
•Even if AGC is set to ON and if the noise reduction
function is enabled, afterimages may...

5. Move the cursor to COARSE with the joystick.
6. Match the vertical phases for both video output sig-
nals as closely as possible with the joystick. The
coarse adjustment can be performed in steps of
22.5 degrees (16 steps) with the joystick.
Note:
After the 16th step, the adjustment level returns
to the first step.
7. Move the cursor to FINE by using the joystick.
8. Match the vertical phase for both video output sig-
nals as closely as possible with the joystick.
Notes:
•When the | cursor reaches the...

-47-
(2) Automatic White Balance Control Mode (AWC)
1. Move the cursor to WHITE BAL and select AWC →
PUSH SET with the joystick.
2. Press the CAM (SET) button to start the white bal-
ance setup. PUSH SET is highlighted to indicate that
white balance is being set.
3. PUSH SET returns to normal when balance setting is
completed.
4. For fine adjustment of the AWC, move the cursor to
AWC and press the CAM (SET) button. The AWC
fine adjustment menu appears on the monitor
screen.
5. Move the cursor to RET with...

●Auto Focus Setting (AF MODE)
1. Move the cursor to AF MODE, and select the follow-
ing mode with the joystick. S, M and L stand for
Small, Middle and Large areas respectively in the
center of a scene that are used for sensing sharp-
ness in auto-focusing.
MANUAL S, M, L:Auto focus is activated only when
the button that is assigned for the auto-focus
function on the controller is pressed.
AUTO S, M, L:Auto focus is activated automatically
while the pan, tilt or zoom operation is manually
performed. These...

-49-
●Special 2 Menu (SPECIAL2)
This menu lets you adjust and set up the picture quality
to meet your requirements.
Move the cursor to SPECIAL2 and press the F3 button
of WV-CU650. The special menu appears on the moni-
tor screen. For WV-RM70, hold down the right and left
switches simultaneously for 2 seconds or more.
• Chroma Level (CHROMA GAIN)
Aperture Level (AP GAIN)
Pedestal Level (PEDESTAL)
Hue Level Setting (HUE)
1. Move the cursor to CHROMA GAIN, and the I cur-
sor is highlighted.
2. Move the I...

After a blemish compensation position is set up, (*)
is attached at the right of the number.
3. If you would like to delete a blemish compensation
position, move the cursor to the applicable number
and press the CAM (SET) button.
The blemish compensation position setting screen
appears. Press the F3 button of WV-CU650 when
the setting screen is active.
For WV-RM70, hold down the right and left buttons
simultaneously for 2 seconds or more.
For WV-CU161C, hold down the [4] and [6] keys
simultaneously for 2...