Panasonic Color Cctv Camera Wv Cs574 Operating Instructions

-31-
■Deleting Preset Positions
1. Move the cursor to PRESET 1 and select the position
number to be deleted with the joystick.
2. Press the CAM (SET) button to display the preset
setting menu.
3. Move the cursor to DEL and press the CAM (SET)
button.
This deletes the preset position and the PRESET
NUMBER SET menu appears. The * mark on the
right of the number disappears.
Note:
Your selected preset number is cancelled only in
the SEQ and SORT mode. The previously set
parameters (for PAN, TILT positions,...

This determines the starting point and the cursor
moves to END.
(3) Move the joystick to select a panning endpoint
and press the CAM (SET) button.
This determines the endpoint and the cursor
moves to POSITION.
4. To set a panning speed
Move the cursor to SPEED, and set a panning
speed with the joystick.
The panning speed increases when the joystick is
moved to the right, and decreases when it is moved
to the left.
Caution:
If the panning range is changed after the camera
has not panned for a long time or...

-33-
OFF:The camera pans from the starting point to the
endpoint, and rotates backward to the starting
point.
This movement is repeated over and over.
6. To set a dwell time
Move the cursor to DWELL TIME and select a dwell
time with the joystick.
Dwell time changes as follows: (unit: s)
7. To set pan limit ON/OFF
Move the cursor to PAN LIMIT and select ON or OFF
with the joystick.
The factory default setting is OFF.
ON:Manual pan is limited from the starting point to
the endpoint specified by position...

●Password Lock (PASSWORD LOCK)
Caution:
For security, do not operate your VCR for recording
while the password menus are displayed on the
monitor.
A 3-digit number is used for a password to limit
access to all settings.
1. Move the cursor to PASSWORD LOCK, then select
ON or OFF with the joystick.
Note:
ON or OFF can be selected only after going
through the password verification.
OFF:You can change all settings.
ON:You cannot change settings at all nor operate
AUTO PAN, SEQ, SORT, and PATROL.
2. Press the...

-35- 3-4 To cancel an incomplete password, move the
cursor to RESET, and press the CAM (SET) but-
ton. The screen returns to the verification menu. 
3-5 To return to the SET UP MENU menu without ver-
ifying the password, move the cursor to RET, and
press the CAM (SET) button.
New Password
4. To change the password in step 3-3 above, move
the cursor from OK to NEW PASSWORD, then press
the CAM (SET) button. NEW PASSWORD menu
appears.
Note:
The NEW PASSWORD menu is accessible only
after the verification has...

Moving the joystick in the L direction decreases
the zone frame, and moving it in the H direction
increases it. However, the aspect ratio is fixed at
3 to 4.
The privacy zone setting has been completed.
The menu returns to the ZONE NUMBER setting
menu.
3-6
•To complete new settings and repeat other set-
tings, move the cursor to SET and press the
CAM (SET) button. The ZONE NUMBER setting
menu reappears.
•To cancel new settings and return to the SPE-
CIAL 1 menu, move the cursor to DEL and press
the CAM...

-37-
●Area Title (AREA TITLE)
Up to 8 area titles can be added in specific positions.
1. Select ON (NESW), ON (USER) or OFF with the joy-
stick.
ON (NESW):An area title is displayed for indicating
the camera direction: North (N), North-East (NE),
East (E), South-East (SE), South (S), South-West
(SW), West (W) and North-West (NW).
ON (USER):A user customized area title appears in
a maximum of 16 characters.
OFF:Area title does not appear.
Factory default setting: OFF
2. Press the CAM (SET) button. A...

To Quit Editing
•To return to the AREA TITLE menu, move the cursor
to RET, and press the CAM (SET) button.
•To cancel one area title, move the cursor to RESET
in the AREA TITLE menu, and press the CAM (SET)
button.
•To return to the SPECIAL 1 menu, move the cursor
to RET, and press the CAM (SET) button.
•To erase all the area titles, move the cursor to
RESET in the AREA TITLE (USER) selection menu,
and press the CAM (SET) button.
Notes:
•An area title appears under the camera ID if both
are set in the...

-39- •DIGITAL FLIP
•PRIVACY ZONE
•CAMERA ID
•PROPO.PT
•PAN LIMIT
•ZOOM LIMIT
•TILT ANGLE
•CLEANING
After starting the patrol-learn, the following manual
operations are stored.
•PAN/TILT/ZOOM/FOCUS operation
•IRIS operation
•Preset positioning
The auto focus function is disabled during the patrol
operation. Under such circumstances, the camera
goes out of focus when zooming in with WIDE
selected resulting from a characteristic of a zoom
lens. For storing the zoom operation, start with the
TELE mode keeps...

CNT-CLS 1, 2 (Output)
Two contact closure signals (Open collector type) are
output through the Alarm Output connector.
1. Move the cursor to CNT-CLS 1, and select OFF,
ALARM or AUX 1 with the joystick.
The factory default setting is OFF.
When ALARM is selected, TIME OUT appears.
Select an appropriate duration from among 100 MS,
200 MS, 1000 MS (1 s), 2000 MS (2 s) and 4000 MS
(4 s) with the joystick. (unit: s)
The factory default setting is 100 MS. (unit: ms)
Note:
The shorter the duration, the more...