Panasonic Camera With Separate Head Aw E300s Operating Instructions

11 (E)
GEN-LOCK
INAUX
INAUTO
75 Ω/Hi-ZAUTO
75 Ω/Hi-ZR/PR /C
OUT OUT
AUDIOSEE MANUAL
VIDEO 1
G/Y/Y VIDEO 2
B/PB /B SYNCS-VIDEO14
23TALLY
CAMERA (MULTI)
CABLE SELECTFUSE250V  1.25A
TALK
INCOM
RECEIVECONTROL
TALLY & INCOM
MULTIOVP
MPX
MPX OUTPUT
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
System Configuration (Connections)
$Connecting a remote control unit (RCU)
OUse  the  AW-CA50A26  RCU  cable  to  connect  the  RCU  (WV-RC700A  or  WV-RC550)
and the camera....

12 (E)
ENGLISH
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
ALL 1
2USER  SETONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
System Configuration (Connections)
$Connecting a remote control box (RCB)
OUse the AW-CA50T10 RCB cable to connect the RCB (WV-CB700A) and the camera.
1Before  proceeding  with  the  connections,  set  the  AC  adapter’s  power  switch  to  OFF
and the RCB ON/OFF switch on the RCB panel to OFF.
2Connect  the  50-pin  end  of...

13 (E)
Camera
Camera (or special effects
unit) used to achieve genlockVIDEO OUT
G/L IN
VIDEO OUT
INPUT
Video output
To special effects unit or monitoring
systemGenlock signal (BB)
OUTPUT
WJ-300C video
divider
System Configuration (Connections)
$Connecting multiple cameras (achieving genlock)
OInput the sync signal (BB) to the genlock input connector.
ODo not turn off the power of the camera which is used to achieve genlock.
OThe genlock adjustment must be performed when genlock is to be achieved. 
(See...

14 (E)
ENGLISH
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
System Configuration (Connections)
$Connections for exercising control from a computer
The  AW-CA50T9  PC  control  cable  and  the  dedicated  software  programme  are  required
for the camera to be controlled from the computer.  Ask your dealer for details.
VIDEO OUT
AW-CA4T1 
DC power cable75 Ωcoaxial cable
AW-CA50T9 (10 meters) PC...

15 (E)
System Configuration (Connections)
$Reference: Model numbers of related equipment
Read  the  operating  instructions  of  the  equipment  concerned  along  with  these
instructions.
Remote control unit: 
WV-RC700A
Remote control unit: 
WV-RC550
Remote control box: 
WV-CB700A
RCU rack-mounting chassis: 
WV-Q70
Connecting cable: 
WV-CA9T5 (D-sub 9-pin—BNC, approx. 5 meters)
Studio cable: 
WV-CA26U15, WV-CA26U30, WV-CA26U100
Cable joint adapter: 
WV-CA26T26
RCB cable: 
AW-CA50T10
RCU able:...

16 (E)
ENGLISH
Operating Mode Selection
The user can select the camera’s functions to match the operating conditions from the four
modes which have been preset.  Select the mode that suits the shooting conditions and the
user’s preferences.
Halogen light mode
This mode is suited to shooting indoors at wedding receptions, parties, seminars and other
indoor events.  Its settings can be changed using a simple menu.
Fluorescent light mode
This  mode  is  suited  to  shooting  indoors  under  fluorescent...

17 (E)
¢¢
Use Mode Set¢¢¢
Halogen
Fluorescent
Outdoor
User
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
Operating Mode Selection
$How to select the operating
mode
OOperations using the camera by itself
1When  the  camera’s  power  is  turned
on  while  the  MENU  switch  is  held
down,  the  Use  Mode  Set  screen
appears on the monitor.
2Each  time  the  MENU  switch,
ITEM/AWC  switch  or  NO/BAR  switch
is  pressed,  the...

18 (E)
ENGLISH
Operating Procedures
1.Turn on the power to the units concerned.
2.Adjust the subject brightness to the appropriate level.
3.Select the operating mode.
Once  this  mode  is  selected,  it  need  not  be  changed  so  long  as  the  camera  is  to  be
used under the same conditions.
4.Adjust the flange back of the lens, and adjust the iris and focus.
OThis  adjustment  must  be  performed  when  using  the  camera  for  the  first  time  or
when the lens has been changed.
5.Adjust the white...

19 (E)
Focus ring
LOCK screw
FOCUS screw
Adjustments
$Flange back adjustment
This  adjustment  will  bring  the  subject  into  focus  across  the  whole  range  from  the
maximum telephoto position to the widest angle position of the zoom lens.
Perform this adjustment when back focusing is not achieved with a fixed focus lens. 
(Adjustment range: ±0.2 mm)
1Shoot a dark subject to open the iris.
2Reduce  the  distance  between  the  camera  and  subject  to  less  than  2  meters,  remove
the cap over...

20 (E)
ENGLISH
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTO
HOLD
ABC
AUTO/ATWPAINTINGGAIN
$White balance adjustment
Automatic adjustment (AWC: AWC A/AWC B)
OUse  the  camera  in  the  AWC  mode  if  the  lighting  conditions  at  the  shooting  site  will
remain unchanged.
OWhen  “AWC  A”  or  “AWC  B”  has  been  selected  for  the  white  balance  on  the  Colour
Set  sub-menu  (pages  31,  37),  the  colour  temperature  conditions  of  two  locations  can
be preset (stored in the memory) using A/B.
OWhen  the...