Panasonic Camera With Separate Head Aw E300s Operating Instructions

							OPERATING INSTRUCTIONS 
						

							Before  attempting  to  connect,  operate  or  adjust  this  product,  please
read these instructions completely.
1/3-inch Camera With Separate Head
Model AW- P
FOCUS
LOCK 
						

							2
indicates safety information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR  BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The  lightning  flash  with  arrowhead  symbol,  within  an  equilateral  triangle,
is  intended  to  alert  the  user  to  the  presence  of  uninsulated  “dangerous
voltage”  within  the  product’s  enclosure  that  may  be  of  sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user  to  the  presence  of  important  operating  and  maintenance  (service)
instructions in the literature accompanying the appliance.
WARNING:
TO  REDUCE  THE  RISK  OF  FIRE  OR  SHOCK  HAZARD,  DO  NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
FCC Note:
This  device  complies  with  Part  15  of  the  FCC  Rules.  To  assure  continued
compliance  follow  the  attached  installation  instructions  and  do  not  make  any
unauthorized modifications.
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  class  A
digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to
provide  reasonable  protection  against  harmful  interference  when  the  equipment  is
operated  in  a  commercial  environment.  This  equipment  generates,  uses,  and  can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction  manual,  may  cause  harmful  interference  to  radio  communications.
Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful
interference in which case the user will be required to correct the interference at his
own expense. 
						

							3
Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . 4
Features. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Special Notes on Operation. . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . 6
Parts and Their Functions . . . . . . . . . . . 7
$Main unit . . . . . . . . . . . . . . . . . . . . . . 7
$Camera head unit . . . . . . . . . . . . . . . 9
Installation. . . . . . . . . . . . . . . . . . . . . . . 10
$Attaching the lens . . . . . . . . . . . . . . 10
$Installation on a camera stand 
(tripod, etc.) . . . . . . . . . . . . . . . . . . . 10
System Configuration (Connections). . . 11
$Connecting equipment with a
composite video input connector . . . 11
$Connecting a remote control unit
(RCU) . . . . . . . . . . . . . . . . . . . . . . . 12
$Connecting a remote control box
(RCB) . . . . . . . . . . . . . . . . . . . . . . . 13
$Connecting multiple cameras
(achieving genlock) . . . . . . . . . . . . . 14
$Connections for exercising control
from a computer . . . . . . . . . . . . . . . 15
$Reference: Model numbers of related
equipment . . . . . . . . . . . . . . . . . . . . 16
Operating Mode Selection . . . . . . . . . . 17
$
How to select the operating mode. . 18
Operating Procedures . . . . . . . . . . . . . 19
Adjustments . . . . . . . . . . . . . . . . . . . . . 20
$Flange back adjustment . . . . . . . . . 20
$White balance adjustment . . . . . . . . 21
$Black balance adjustment . . . . . . . . 23
$Black level (total pedestal)
adjustment . . . . . . . . . . . . . . . . . . . . 24
$Genlock adjustment. . . . . . . . . . . . . 25Menu Item Settings and Changes . . . . 27
$Setting the menu items . . . . . . . . . . 27
$
Halogen light, fluorescent light and
outdoor mode sub-menu screens
. . . 29
$User mode sub-menu screens . . . . 35
Returning to Initial Settings. . . . . . . . . 42
$Initial settings (factory settings) . . . . 43
Outline Drawings . . . . . . . . . . . . . . . . . 45
$Main unit . . . . . . . . . . . . . . . . . . . . . 45
$Camera head unit . . . . . . . . . . . . . . 45
Specifications . . . . . . . . . . . . . . . . . . . . 46
$Accessories . . . . . . . . . . . . . . . . . . . 47 
						

							4
Introduction
OFeaturing  digital  video  signal  processing,  this  1/3-inch  3-CCD  system  color  camera  with
its separate head achieves a high picture quality and high reliability as well as many and
varied functions despite its compact size and light weight.
OThe  head  is  separate  which  means  that  it  can  easily  be  mounted  on  a  microscope  (C
mount), for instance.
OUsing a menu screen format, the camera’s shooting conditions and functions can easily
be set and changed.
OThe  camera  can  be  connected  to  a  peripheral  unit  such  as  an  RCB  or  RCU  for
expanding the capabilities of the system to suit the intended applications.
OA wide range of applications can be supported by installing optional cards.
Features
High  picture  quality,  high  reliability,  many  and  varied  functions,  a  compact  size  and
light weight achieved by incorporating digital video signal processing
OResolution: 800 lines (high band DTL ON), S/N ratio: 62 dB (DNR ON)
OMinimum illumination: 1.5 lux (f/1.4 ‘night eye’ mode)
Many and varied functions despite compact size
OSetting of camera parameters using menu screens enabled
OAuto functions such as ATW, ELC and AGC incorporated
OCCD readout (field, frame) switching supported
The  vertical  resolution  can  be  improved  by  switching  to  the  frame  mode,  and  this  is
useful for capturing still images and other kinds of image processing.
OSynchro  scan  function  provided  to  reduce  horizontal  line  noise  when  computer  screens
are shot
OFunctions for controlling camera by computer incorporated
OExtension of cable (standard length of 3 meters) between head unit and main unit up to
10 meters possible 
Faithful image reproduction assured by many compensation circuits
OEven areas with dark colors reproduced clearly by chroma detail enhancement
ONatural detail enhancement enabled even for dark areas by dark detail circuit
ONatural dynamic range reproduced by digital highlight chroma
OFaithful reproduction of colors enabled by digital color matrix
Full spectrum of video productions supported
OConditions  optimally  suited  to  each  application  selectable  from  4  operation  modes
(halogen light mode, fluorescent light mode, outdoor mode and user mode)
OSMPTE color bar display provided
ORemote control enabled by RCU or RCB 
						

							5
Special Notes on Operation
OTurn the power off before connecting or disconnecting cables.
OConnection or disconnection of any studio cable, RCB cable or other cable to any unit of
equipment must be performed while power is off.
While the camera is in automatic mode:
OShooting  of  bright  objects  in  ELC  operation  mode  may  result  in  a  smeared  picture
unique to the CCD.
OThe  ATW  function  under  fluorescent  illumination  can  adversely  change  the  white
balance. 
						

							6
Precautions
ODo  not  attempt  to  disassemble  the  camera,  Remote  Control  Unit  (RCU)  or  other  units.
In  order  to  prevent  electric  shock,  do  not  remove  screws  or  covers.    There  are  no  user-
serviceable parts inside.
ODo  not  mishandle  the  camera.    Avoid  striking,  shaking,  etc.  The  camera  contains
precision components which could be damaged by improper handling or storage.
ODo  not  let  the  lens  remain  uncovered  when  the  camera  is  not  in  use.    If  the  lens  is  not
installed, do not leave the lens mount hole uncovered.
ODo not touch the surface of the lens or prism.
ODo not use strong or abrasive detergents when cleaning the camera body.
ODo not aim the camera toward the sun, irrespective of whether it is turned on or not.
ODo not expose the camera or Remote Control Unit (RCU) to rain or moisture, and do not
try to operate the equipment in wet conditions. Do not operate the camera or RCU if it is
wet.
ODo  not  operate  the  camera  or  Remote  Control  Unit  (RCU)  outdoors  during  a  thunder
storm.
ODo not use the camera where it will be subject to high temperatures or high humidity.
ODo not leave the camera and Remote Control Unit (RCU) turned on when not in use.  Do
not  unnecessarily  turn  the  camera  power  on  and  off  repeatedly.  Do  not  block  the
ventilation slots.
ORefer any servicing to qualified service personnel.
OHandle the camera with care.
OPlace the lens cap on the lens when the camera is not in use.  If the lens is not installed,
protect the surface of the prism by placing the body cap over the lens mount hole.
OUse  a  mild  blower  or  lens  cleaning  tissue  designed  for  coated  lenses  to  clean  the
surface of the lens or prism if it requires cleaning.
OUse  a  dry  cloth  to  clean  the  camera  if  it  is  dirty.    If  the  dirt  is  hard  to  remove,  use  mild
detergent and wipe gently.
OUse  caution  when  operating  the  camera  near  spot  lights  or  bright  lights,  as  well  as  any
objects and surfaces which may reflect light.
OIf  the  camera  or  RCU  gets  wet,  turn  the  power  off  immediately  and  have  the  unit
checked by an authorized service facility.
OFollow normal safety precautions to avoid personal injury.
OUse  the  camera  in  an  environment  where  the  temperature  is  within  14°F  to  113°F
(–10°C to +45°C), and the relative humidity is within 30 % to 90 %.
OAlways  turn  the  power  off  when  the  camera  is  not  going  to  be  used.    Operate  the
camera and RCU only when there is adequate ventilation.
OOperating  a  wireless  device  that  generates  powerful  radio  waves  near  the  camera  may
adversely affect the output images. 
						

							7
$Main unit
1
OPTION CARD
MENU
ITEM / AWC
YES / ASC
+
-NO / BARVIDEO OUT
G / L INI / F REMOTE
IRIS
DC12V IN
6 =
; 2
<
8
7
9
: 3
4
5
Parts and Their Functions
1Cable connector
This is used to connect the camera to the camera head unit using a cable.
2MENU switch [MENU (t)]
The  menu  will  appear  on  the  screen  when  this  switch  is  pressed  for  about  5  seconds.
When  it  is  pressed  while  a  menu  is  displayed,  the  menu  item  immediately  above  is
selected.
3ITEM/AWC switch [ITEM/AWC (y)]
When  this  switch  is  pressed  while  a  menu  is  displayed,  the  menu  item  immediately
below  is  selected.    While  a  menu  is  not  displayed  (when  the  camera  is  in  the  shooting
mode), it serves as the automatic white balance control (AWC) switch.
4YES/ABC switch [YES/ABC (+)]
When  this  switch  is  pressed  while  a  menu  is  displayed,  the  sub-menu  of  a  menu  item
appears on the screen.  When it is pressed while a sub-menu is displayed, the higher of
the  two  settings  shown  is  selected.    While  a  menu  is  not  displayed,  it  serves  as  the
automatic black balance control (ABC) switch.
5NO/BAR switch [NO/BAR (–)]
When  this  switch  is  pressed  while  the  main  menu  is  displayed,  the  next  item  down  can
be  selected.    When  it  is  pressed  while  a  sub-menu  is  displayed,  the  lower  of  the  two
settings shown is selected.  When it is pressed for about 5 seconds while a menu is not
displayed, the color bar signals and camera (shooting mode) are switched. 
						

							8
Parts and Their Functions
6Video output connector [VIDEO OUT]
The composite video signals are output from this connector.
(1 V [p-p], 75 Ω, BNC connector)
7Iris connector [IRIS]
This is the standard input connector of the lens which comes with an auto iris function.
8Interface/remote connector [I/F REMOTE]
This  is  used  to  connect  the  remote  control  unit  (RCU:  WV-RC700A  or  WV-RC550),
remote control box (RCB: WV-CB700A), etc.
The AW-CA50A26 RCU cable is required to connect the WV-RC700A or WV-RC550.
The AW-CA50T10 RCB cable is required to connect the WV-CB700A.
9Power LED
This lights up red when DC power is supplied to the DC 12V input socket :.
:DC 12V input socket [DC 12V IN]
The  DC  12  V  power  supply  (2  A  or  above)  is  connected  here  using  the  AW-CA4T1  DC
power cable.
;Cable clamp
This  clamps  the  AW-CA4T1  DC  power  cable  which  has  been  connected  to  the  DC  12V
input socket :to prevent the cable from becoming disconnected.

						

							9
?>@
AA
FOCUS
LOCKFOCUS
LOCK
$Camera head unit
Parts and Their Functions
>Lens mount
A 1/3-inch C mount lens or microscope adapter, etc. is attached here.
?Flange back adjust screw [FOCUS/LOCK]
When  the  flange  back  needs  to  be  adjusted,  remove  the  cap,  loosen  the  LOCK  screw,
and adjust by turning the FOCUS screw.  (Adjustment range: ±0.2 mm)
Upon completion of the adjustment, re-tighten the LOCK screw.
@Cable connector
This is used to connect the head unit to the main unit using a cable.
ACamera mounting adapter 
(mounting screw holes: M2.6a10, spring washers provided)
This  is  used  to  secure  the  head  unit  when  it  is  to  be  installed  on  a  wall  or  ceiling  or  a
tripod is to be used.  The head unit can be mounted on the top or bottom surface.