Panasonic Camera With Separate Head Aw E300s Operating Instructions
Have a look at the manual Panasonic Camera With Separate Head Aw E300s Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
36 (E)
ENGLISH
Menu Item Settings and Changes (in user mode)
PElectronic shutter step selection [Step: OFF or 1/120 to 1/10000]
This can only be set when “Step” has been selected as the electronic shutter mode
selection Osetting.
OFF:
The electronic shutter is set to OFF.
1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
The electronic shutter is actuated at the respective shutter speed.
OThe speed cannot be set to 1/250, 1/2000, 1/4000 or 1/10000 by operating the RCU...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-85.png "Page 86
36 (E)
ENGLISH
Menu Item Settings and Changes (in user mode)
PElectronic shutter step selection [Step: OFF or 1/120 to 1/10000]
This can only be set when “Step” has been selected as the electronic shutter mode
selection Osetting.
OFF:
The electronic shutter is set to OFF.
1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
The electronic shutter is actuated at the respective shutter speed.
OThe speed cannot be set to 1/250, 1/2000, 1/4000 or 1/10000 by operating the RCU...")
![Page 87
37 (E)
Menu Item Settings and Changes (in user mode)
SGain increase adjustment
[Gain: AGC HIGH, AGC LOW, 0 dB to 30 dB or N-Eye (night eye)]
AGC LOW :The function for automatically increasing the gain up to
approximately 18 dB is activated, and the light quantity is
thereby automatically adjusted.
AGC HIGH :The function for automatically increasing the gain up to
approximately 30 dB is activated, and if the light quantity is still
insufficient, ‘night eye’ (digital...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-86.png "Page 87
37 (E)
Menu Item Settings and Changes (in user mode)
SGain increase adjustment
[Gain: AGC HIGH, AGC LOW, 0 dB to 30 dB or N-Eye (night eye)]
AGC LOW :The function for automatically increasing the gain up to
approximately 18 dB is activated, and the light quantity is
thereby automatically adjusted.
AGC HIGH :The function for automatically increasing the gain up to
approximately 30 dB is activated, and if the light quantity is still
insufficient, ‘night eye’ (digital...")
![Page 88
38 (E)
ENGLISH
Menu Item Settings and Changes (in user mode)
WHighlight chroma selection [Highlight Chroma: OFF, LOW or HIGH]
When this is set to LOW or HIGH, the dynamic range of the colours is increased to
prevent whitening-out in very bright conditions.
XPainting adjustment [Painting, R Gain, B Gain, R Pedestal, B Pedestal: –30 to +30]
R Gain, B Gain:
These enable the white balance after AWC to be finely adjusted when AWC A or
AWC B has been selected as the white balance...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-87.png "Page 88
38 (E)
ENGLISH
Menu Item Settings and Changes (in user mode)
WHighlight chroma selection [Highlight Chroma: OFF, LOW or HIGH]
When this is set to LOW or HIGH, the dynamic range of the colours is increased to
prevent whitening-out in very bright conditions.
XPainting adjustment [Painting, R Gain, B Gain, R Pedestal, B Pedestal: –30 to +30]
R Gain, B Gain:
These enable the white balance after AWC to be finely adjusted when AWC A or
AWC B has been selected as the white balance...")
![Page 89
39 (E)
Menu Item Settings and Changes (in user mode)
_Horizontal detail level HIGH setting [H Detail Level H: +1 to +63]
Vertical detail level HIGH setting [V Detail Level H: +1 to +31]
Horizontal detail level LOW setting [H Detail Level L: 0 to +62]
Vertical detail level LOW setting [V Detail Level L: 0 to +30]
These are for setting the detail levels in the horizontal (H) and vertical (V) directions at
the detail level selection ^HIGH and LOW settings.
The HIGH setting must be higher...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-88.png "Page 89
39 (E)
Menu Item Settings and Changes (in user mode)
_Horizontal detail level HIGH setting [H Detail Level H: +1 to +63]
Vertical detail level HIGH setting [V Detail Level H: +1 to +31]
Horizontal detail level LOW setting [H Detail Level L: 0 to +62]
Vertical detail level LOW setting [V Detail Level L: 0 to +30]
These are for setting the detail levels in the horizontal (H) and vertical (V) directions at
the detail level selection ^HIGH and LOW settings.
The HIGH setting must be higher...")
![Page 90
40 (E)
ENGLISH
Menu Item Settings and Changes (in user mode)
hColour matrix compensation level adjustment
[Matrix (R-G), (R-B), (G-R), (G-B), (B-R), (B-G): –31 to +31]
These are for adjusting the colour matrix compensation.
(R-G) : The colours between red and magenta are toned up or down.
(R-B) : The colours between red and yellow are toned up or down.
(G-R) : The colours between green and cyan are toned up or down.
(G-B) : The yellowish green colour is toned up or down.
(B-R) : The colours between blue...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-89.png "Page 90
40 (E)
ENGLISH
Menu Item Settings and Changes (in user mode)
hColour matrix compensation level adjustment
[Matrix (R-G), (R-B), (G-R), (G-B), (B-R), (B-G): –31 to +31]
These are for adjusting the colour matrix compensation.
(R-G) : The colours between red and magenta are toned up or down.
(R-B) : The colours between red and yellow are toned up or down.
(G-R) : The colours between green and cyan are toned up or down.
(G-B) : The yellowish green colour is toned up or down.
(B-R) : The colours between blue...")
41 (E) ¢¢ Initialize Data¢¢ (Halogen Mode) Do you want to initialize Halogen Mode settings? O.K. : YES SW Cancel : NO SW Returning to Initial Settings The initial (factory) settings can be restored when, for example, mistakes have been made in the settings in the respective mode. When an option card is being used, the Option Card Set sub-menu does not return to the initial settings even if the “return to initial settings” operation is performed. 1.Select Initialize Data on the main menu for the selected mode, and press the YES/ABC switch. The Initialize Data sub-menu screen shown on the right will now appear for about 10 seconds. 2.Once the Initialize Data sub-menu screen has appeared, press the YES/ABC switch within 10 about seconds to initialize the settings. A message is then displayed on the screen such as the one shown in 2, and operation returns to the main menu. 3.If, after the Initialize Data sub-menu screen has appeared, the NO/BAR switch is pressed or the YES/ABC switch is not pressed within 10 about seconds, a message such as the one shown in 3will be displayed on the screen, and operation will return to the main menu without initializing the settings. Initialize Data sub-menu The mode selected is displayed here. 1 2 Halogen Mode Initialized 3 Halogen Mode unchanged
42 (E) ENGLISH Returning to Initial Settings $Initial settings (factory settings) OInitial settings in halogen light, fluorescent light and outdoor modes Item Brightness SetA.Iris Level A.Iris PEAK/AVG A.Iris Area Auto ND (ELC) Auto Gain Up Manu Gain Up Pedestal Contrast (Gamma) Halogen mode ±0 0 Top cut OFF OFF 0dB ±0 MIDFluorescent mode ±0 0 Top cut OFF OFF 0dB ±0 MIDOutdoor mode ±0 0 Top cut ON HIGH --- –10 MID Colour SetChroma Level Flesh Tone White Bal High-light Chroma ±0 ±0 AWC A OFF+1 ±0 AWC A OFF+2 ±0 ATW OFF G/L. AdjustmentH Phase SC Coarse SC Fine ±0 1 ±0±0 1 ±0±0 1 ±0 Sharpness (DTL) SetDTL Select Level Noise Suppress Clean DNR DTL Flesh Tone Sharpness HIGH OFF OFF MIDSharpness HIGH OFF OFF MIDSharpness HIGH OFF OFF MID Other SetShutter Speed Synchro Scan V Resolution Baud Rate Nega/PosiOFF --- Normal 9600bps PosiOFF --- Normal 9600bps PosiAuto ND --- Normal 9600bps Posi
43 (E) Returning to Initial Settings OInitial settings in user mode ItemUser mode Iris, Shutter, Gain SetA.Iris Level A.Iris PEAK/AVG A.Iris Area Auto Iris Adjust Shutter Mode Step Synchro Scan Field/Frame Gain Pedestal ±0 0 Top cut OFF Step OFF --- Field 0dB ±0 Colour SetChroma Level White Bal High-light Chroma Painting R Gain B Gain R Pedestal B Pedestal 2D LPF ±0 AWC A OFF ±0 ±0 ±0 ±0 OFF G/L. Adjustment H Phase SC Coarse SC Fine±0 1 ±0 Detail Set 1Detail H Detail Level H V Detail Level H H Detail Level L V Detail Level L Detail Band Noise Suppress Level Dependent Dark Detail HIGH +11 +12 +7 +6 2 3 0% 0 Detail Set 2Chroma Detail Flesh DTL Level Corner Detail Precision Detail0 MID OFF OFF ItemUser mode Colour Matrix SetMatrix(R-G) Matrix(R-B) Matrix(G-R) Matrix(G-B) Matrix(B-R) Matrix(B-G) ±0 ±0 ±0 ±0 ±0 ±0 Other SetGamma Knee Point White Clip Flare R Flare G Flare B Black Stretch Clean DNR Baud Rate Nega/Posi0.45 88% 110% 0 0 0 OFF OFF 9 600bps Posi
44 (E) ENGLISH Separate Camera AW – – + MENU ITEM/AWC YES/ABC NO/BAROPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN 10 145 77 484 Outline Drawings $Main unit $Camera head unit 149.67.958.5 1.5 69 10 LOCK FOCUS Unit: mm
45 (E) Specifications Operating temperature range: –10°C to +45°C Allowable humidity: 30 % to 90 % Dimensions (WaHaD): Main unit: 84a77a159 mm Camera head unit: 79a60a58.5 mm Weight: Main unit: Approx. 0.64 kg Camera head unit: Approx. 0.23 kg Finish: AV ivory-coloured paint (colour approximates Munsell 7.9Y6.8/0.8) Optical system: 1/3-inch prism optical system, f/1.4 Pickup device: 1/3-inch IT-type CCD 3-panel system Total number of pixels: 795(H)a596(V) Number of effective pixels: 752(H)a582(V) Pickup area: 4.8(H)a3.6(V) mm Scanning system: 2:1 interlace, 625 lines, 50 fields, 25 frames Scanning frequency: 15.625 kHz horizontal, 50 Hz vertical Synchronization system: Internal sync/gen-lock Power requirements:DC 12V Power consumption:0.8 A Gen-lock input: 1.0 V [p-p] black burst signal (BNC connector, 50-pin D-sub connector) Video outputs: Composite 1.0 V [p-p]/75 Ω (BNC connector, 50-pin D-sub connector) YC: 1.0 V [p-p] for Y, 0.3V [p-p] for C (50-pin D-sub connector) Standard illumination: 2,000 lux (3,200K, f/8) Minimum illumination: 1.5 lux (f/1.4, ‘night eye’ mode) S/N ratio: 60 dB (with DNR ON) Horizontal resolution: 800 lines (high band DTL ON) Registration: 0.05% Detail enhancement: Horizontal/vertical (works for both) White balance: Automatically adjusted for A and B in 2 memories, fine adjustment, ATW, 3200K, 5600K Black balance: Automatically adjusted Gain switching: AGC LOW/HIGH, 0 dB to 30 dB, N-Eye Iris: Auto, manual
46 (E) ENGLISH Specifications Electronic shutter: Synchro scan: 50.24 Hz to 15.63 kHz Step shutter: OFF, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 ELC: Target level variable Operation mode selection: halogen light, fluorescent light, outdoor, user Colour bars: Full colour bars (setup: 0) Lens mount: 1/3-inch C mount Switches: Back panel: MENU, ITEM/AWC, YES/ABC, NO/BAR Menu item setting: Gain, Shutter, White Balance, Detail Level (OFF/LOW/HIGH), Corner Detail, Precision Detail Level, Black Stretch, High Light Chroma, Skin Colour Detail, Photometric Measurement Method (ALL/CENTRE/TOP CUT/BOTTOM CUT/R/L CUT) CCD Read Out Mode (FIELD/FRAME 1/FRAME 2) Clean DNR, Colour Bar Setup, Use Mode, Nega/Posi, PC Control Access SpeedAdjustment function: Menu adjustment: R/B Gain, R/B Pedestal, Black Level, Video Level, Detecting Ratio, Genlock Horizontal Phase/Colour Phase, Gamma Compensation Level, Knee Compensation Level, White Clip Level, Horizontal Detail Level, Vertical Detail Level, Detail Band Level, Noise Suppress Compensation Level, Level Dependent Compensation Level, Chroma Detail Compensation Level, Dark Detail Compensation Level, Matrix Compensation Level, Flare Correction Level Weight and dimensions indicated are approximate. Specifications are subject to change without notice. $Accessories Connection cable for the camera head and the main unit (3 m a1)
F0301W @ Printed in Japan VQT9258E Matsushita Electric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-8691, Japan