Panasonic Camera With Separate Head Aw E300s Operating Instructions
Have a look at the manual Panasonic Camera With Separate Head Aw E300s Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 37
36
Menu Item Settings and Changes (in user mode)
KPicture level adjustment [Picture Level: –50 to +50]
This is for adjusting the AGC/ELC convergence level.
LLight-metering detection ratio adjustment [Light PEAK/AVG: P50 to A50]
This enables the ratio of the average level (A) to peak level (P) at which AGC/ELC is
detected to be adjusted.
MLight metering method selection [Light Area: All, center, top cut, bottom cut, R/L
cut]
This enables the AGC/ELC light-metering method to...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-36.png "Page 37
36
Menu Item Settings and Changes (in user mode)
KPicture level adjustment [Picture Level: –50 to +50]
This is for adjusting the AGC/ELC convergence level.
LLight-metering detection ratio adjustment [Light PEAK/AVG: P50 to A50]
This enables the ratio of the average level (A) to peak level (P) at which AGC/ELC is
detected to be adjusted.
MLight metering method selection [Light Area: All, center, top cut, bottom cut, R/L
cut]
This enables the AGC/ELC light-metering method to...")
![Page 38
37
Menu Item Settings and Changes (in user mode)
PElectronic shutter step selection [Step: OFF or 1/100 to 1/10000]
This can only be set when “Step” has been selected as the electronic shutter mode
selection Osetting.
OFF:
The electronic shutter is set to OFF.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
The electronic shutter is actuated at the respective shutter speed. When the shutter is
used at the 1/100 speed in a 50 Hz area, the flicker caused by fluorescent...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-37.png "Page 38
37
Menu Item Settings and Changes (in user mode)
PElectronic shutter step selection [Step: OFF or 1/100 to 1/10000]
This can only be set when “Step” has been selected as the electronic shutter mode
selection Osetting.
OFF:
The electronic shutter is set to OFF.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
The electronic shutter is actuated at the respective shutter speed. When the shutter is
used at the 1/100 speed in a 50 Hz area, the flicker caused by fluorescent...")
![Page 39
38
Menu Item Settings and Changes (in user mode)
SGain increase adjustment
[Gain: AGC HIGH, AGC LOW, 0 dB to 30 dB or N-Eye (night eye)]
AGC LOW : The function for automatically increasing the gain up to approximately 18
dB is activated, and the light quantity is thereby automatically adjusted.
AGC HIGH : The function for automatically increasing the gain up to approximately 30
dB is activated, and if the light quantity is still insufficient, ‘night eye’
(digital gain increase) is added,...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-38.png "Page 39
38
Menu Item Settings and Changes (in user mode)
SGain increase adjustment
[Gain: AGC HIGH, AGC LOW, 0 dB to 30 dB or N-Eye (night eye)]
AGC LOW : The function for automatically increasing the gain up to approximately 18
dB is activated, and the light quantity is thereby automatically adjusted.
AGC HIGH : The function for automatically increasing the gain up to approximately 30
dB is activated, and if the light quantity is still insufficient, ‘night eye’
(digital gain increase) is added,...")
![Page 40
39
Menu Item Settings and Changes (in user mode)
WHighlight chroma selection [Highlight Chroma: OFF, LOW or HIGH]
When this is set to LOW or HIGH, the dynamic range of the colors is increased to
prevent whitening-out in very bright conditions.
XPainting adjustment [Painting, R Gain, B Gain, R Pedestal, B Pedestal: –30 to +30]
R Gain, B Gain:
These enable the white balance after AWC to be finely adjusted when AWC A or
AWC B has been selected as the white balance selection...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-39.png "Page 40
39
Menu Item Settings and Changes (in user mode)
WHighlight chroma selection [Highlight Chroma: OFF, LOW or HIGH]
When this is set to LOW or HIGH, the dynamic range of the colors is increased to
prevent whitening-out in very bright conditions.
XPainting adjustment [Painting, R Gain, B Gain, R Pedestal, B Pedestal: –30 to +30]
R Gain, B Gain:
These enable the white balance after AWC to be finely adjusted when AWC A or
AWC B has been selected as the white balance selection...")
![Page 41
40
Menu Item Settings and Changes (in user mode)
_Horizontal detail level HIGH setting [H Detail Level H: +1 to +63]
Vertical detail level HIGH setting [V Detail Level H: +1 to +31]
Horizontal detail level LOW setting [H Detail Level L: 0 to +62]
Vertical detail level LOW setting [V Detail Level L: 0 to +30]
These are for setting the detail levels in the horizontal (H) and vertical (V) directions at
the detail level selection ^HIGH and LOW settings.
The HIGH setting must be higher...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-40.png "Page 41
40
Menu Item Settings and Changes (in user mode)
_Horizontal detail level HIGH setting [H Detail Level H: +1 to +63]
Vertical detail level HIGH setting [V Detail Level H: +1 to +31]
Horizontal detail level LOW setting [H Detail Level L: 0 to +62]
Vertical detail level LOW setting [V Detail Level L: 0 to +30]
These are for setting the detail levels in the horizontal (H) and vertical (V) directions at
the detail level selection ^HIGH and LOW settings.
The HIGH setting must be higher...")
![Page 42
41
Menu Item Settings and Changes (in user mode)
hColor matrix compensation level adjustment
[Matrix (R-G), (R-B), (G-R), (G-B), (B-R), (B-G): –31 to +31]
These are for adjusting the color matrix compensation.
(R-G) : The colors between red and magenta are toned up or down.
(R-B) : The colors between red and yellow are toned up or down.
(G-R) : The colors between green and cyan are toned up or down.
(G-B) : The yellowish green color is toned up or down.
(B-R) : The colors between blue and cyan are toned...](http://img.usermanuals.tech/thumb/58/68113/w64_aw-e300s_en_om_d-41.png "Page 42
41
Menu Item Settings and Changes (in user mode)
hColor matrix compensation level adjustment
[Matrix (R-G), (R-B), (G-R), (G-B), (B-R), (B-G): –31 to +31]
These are for adjusting the color matrix compensation.
(R-G) : The colors between red and magenta are toned up or down.
(R-B) : The colors between red and yellow are toned up or down.
(G-R) : The colors between green and cyan are toned up or down.
(G-B) : The yellowish green color is toned up or down.
(B-R) : The colors between blue and cyan are toned...")
40 Menu Item Settings and Changes (in user mode) _Horizontal detail level HIGH setting [H Detail Level H: +1 to +63] Vertical detail level HIGH setting [V Detail Level H: +1 to +31] Horizontal detail level LOW setting [H Detail Level L: 0 to +62] Vertical detail level LOW setting [V Detail Level L: 0 to +30] These are for setting the detail levels in the horizontal (H) and vertical (V) directions at the detail level selection ^HIGH and LOW settings. The HIGH setting must be higher than the LOW setting by at least “1” in both the horizontal and vertical directions. `Detail band selection [Detail Band: 1 to 5] This is for setting the detail enhancement band when HIGH or LOW has been selected for the detail level selection ^setting. The higher the setting, the finer the detail. aNoise suppression compensation level adjustment [Noise Suppress: 1 to 10] This is for reducing the amount of screen noise when HIGH or LOW has been selected for the detail level selection ^setting. However, if the setting is too high, the sharpness of detailed subjects is reduced. bLevel dependent compensation level adjustment [Level Dependent: 0% to 25%] This is for reducing the amount of screen noise caused by the detail in the dark areas of the subject. However, if the setting is too high, the sharpness of hair, etc. may be lost. cDark detail compensation level adjustment [Dark Detail: 0 to 5] This is for emphasizing the detail in the dark areas of the subject. It can be set only when “0%” has been selected as the level dependent compensation level adjustment b setting. dChroma detail compensation level adjustment [Chroma Detail: 0 to 15] This is for emphasizing the detail in the high-chroma areas of the subject. eFlesh tone detail level selection [DTL Flesh Tone: LOW, MID or HIGH] LOW : The roughness of the flesh tones is suppressed. MID : Standard setting HIGH : The detail enhancement of the flesh tones is boosted. fCorner detail selection [Corner Detail: OFF or ON] This enables the corner detail, which enhances the resolution of the peripheral areas, to be set to ON or OFF when HIGH or LOW has been selected for the detail level selection ^setting. gPrecision detail level selection [Precision Detail: OFF, LOW or HIGH] This is for narrowing the detail width to suppress the glaring caused by the detail.
41 Menu Item Settings and Changes (in user mode) hColor matrix compensation level adjustment [Matrix (R-G), (R-B), (G-R), (G-B), (B-R), (B-G): –31 to +31] These are for adjusting the color matrix compensation. (R-G) : The colors between red and magenta are toned up or down. (R-B) : The colors between red and yellow are toned up or down. (G-R) : The colors between green and cyan are toned up or down. (G-B) : The yellowish green color is toned up or down. (B-R) : The colors between blue and cyan are toned up or down. (B-G) : The purple color is toned up or down. iGamma correction level setting [Gamma: 0.35 to 0.55] This enables the gamma correction level to be set. jKnee compensation level setting [Knee Point: 88% to 98% or dynamic] 88% to 98%: The level of the knee-compensated video signals can be set (knee point). Dynamic: The knee compensation level is automatically adjusted to match the light quality. kWhite clip level setting [White Clip: 95% to 110%] The peak level of the white-clipped video signals can be set. lFlare compensation level adjustment [Flare R/G/B: 0 to 100] These enable the flare compensation level to be adjusted. The flare compensation level is set prior to shipment. mBlack stretch selection [Black Stretch: ON or OFF] This makes it possible to set the black stretch which compensates for blacking-out under low-brightness conditions to ON or OFF. nClean DNR selection [Clean DNR: HIGH, LOW or OFF] This enables the clean DNR effect to be selected. oPC control communication speed selection [Baud Rate: 1200, 2400, 4800 or 9600 bps] This is for selecting the baud rate at which the camera is to be controlled from a computer. pNegative/positive selection [Nega/Posi: Posi or Nega] Posi : Normal images. Nega : Images whose light and dark sections and colors are reversed. Negative images are shown only for composite outputs and Y/C outputs when the option cards are used.
42 ¢¢ Initialize Data¢¢ (Halogen Mode) Do you want to initialize Halogen Mode settings? O.K. : YES SW Cancel : NO SW Returning to Initial Settings The initial (factory) settings can be restored when, for example, mistakes have been made in the settings in the respective mode. When an option card is being used, the Option Card Set sub-menu does not return to the initial settings even if the “return to initial settings” operation is performed. 1.Select Initialize Data on the main menu for the selected mode, and press the YES/ABC switch. The Initialize Data sub-menu screen shown on the right will now appear for about 10 seconds. 2.Once the Initialize Data sub-menu screen has appeared, press the YES/ABC switch within 10 about seconds to initialize the settings. A message is then displayed on the screen such as the one shown in 2, and operation returns to the main menu. 3.If, after the Initialize Data sub-menu screen has appeared, the NO/BAR switch is pressed or the YES/ABC switch is not pressed within 10 about seconds, a message such as the one shown in 3will be displayed on the screen, and operation will return to the main menu without initializing the settings. Initialize Data sub-menu The mode selected is displayed here. 1 2 Halogen Mode Initialized 3 Halogen Mode unchanged
43 Returning to Initial Settings $Initial settings (factory settings) OInitial settings in halogen light, fluorescent light and outdoor modes Item Brightness SetPicture Level Light PEAK/AVG Light Area Auto ND (ELC) Auto Gain Up Manu Gain Up Pedestal Contrast (Gamma) Halogen mode ±0 0 Top cut OFF OFF 0dB ±0 MIDFluorescent mode ±0 0 Top cut OFF OFF 0dB ±0 MIDOutdoor mode ±0 0 Top cut ON HIGH --- –10 MID Color SetChroma Level Flesh Tone White Bal High-light Chroma ±0 ±0 AWC A OFF+1 ±0 AWC A OFF+2 ±0 ATW OFF G/L. Color Bar SetH Phase SC Coarse SC Fine Color Bar Set ±0 1 ±0 7.5 IRE±0 1 ±0 7.5 IRE±0 1 ±0 7.5 IRE Sharpness (DTL) SetDTL Select Level Noise Suppress Clean DNR DTL Flesh Tone Sharpness HIGH OFF OFF MIDSharpness HIGH OFF OFF MIDSharpness HIGH OFF OFF MID Other SetShutter Speed Synchro Scan V Resolution Baud Rate Nega/PosiOFF --- Normal 9600bps PosiOFF --- Normal 9600bps PosiAuto ND --- Normal 9600bps Posi
44 Returning to Initial Settings OInitial settings in user mode ItemUser mode Iris, Shutter, Gain SetPicture Level Light PEAK/AVG Light Area Auto Iris Adjust Shutter Mode Step Synchro Scan Field/Frame Gain Pedestal ±0 0 Top cut OFF Step OFF --- Field 0dB ±0 Color SetChroma Level White Bal High-light Chroma Painting R Gain B Gain R Pedestal B Pedestal 2D LPF ±0 AWC A OFF ±0 ±0 ±0 ±0 OFF G/L. Color Bar SetH Phase SC Coarse SC Fine Color Bar Set ±0 1 ±0 7.5 IRE Detail Set 1Detail H Detail Level H V Detail Level H H Detail Level L V Detail Level L Detail Band Noise Suppress Level Dependent Dark Detail HIGH +11 +12 +7 +6 2 3 0% 0 Detail Set 2Chroma Detail Flesh DTL Level Corner Detail Precision Detail0 MID OFF OFF ItemUser mode Color Matrix SetMatrix(R-G) Matrix(R-B) Matrix(G-R) Matrix(G-B) Matrix(B-R) Matrix(B-G) ±0 ±0 ±0 ±0 ±0 ±0 Other SetGamma Knee Point White Clip Flare R Flare G Flare B Black Stretch Clean DNR Baud Rate Nega/Posi0.45 88% 110% 0 0 0 OFF OFF 9 600bps Posi
45 Separate Camera AW – – + MENU ITEM/AWC YES/ABC NO/BAROPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN 7/16˝ (10) 5 3/4˝ (145) 3 1/16˝ (77) 3/16˝ (4)3 5/16˝ (84) Outline Drawings $Main unit $Camera head unit 1/16˝ (1)2˝ (49.6)5/16˝ (7.9)2 5/16˝ (58.5)1/16˝ (1.5) 2 3/4˝ (69) 7/16˝ (10) LOCK FOCUS Unit: inch (mm)
46 Specifications Operating temperature range: 14°F to +113°F (–10°C to +45°C) Allowable humidity: 30 % to 90 % Dimensions (WaHaD): Main unit: 3 5/16˝a3 1/16˝a6 5/16˝ (84a77a159 mm) Camera head unit: 3 1/8˝a2 3/8˝a2 5/16˝ (79a60a58.5 mm) Weight: Main unit: Approx. 1.408 lb (0.64 kg) Camera head unit: Approx. 0.506 lb (0.23 kg) Finish: AV ivory-colored paint (color approximates Munsell 7.9Y6.8/0.8) Optical system: 1/3-inch prism optical system, f/1.4 Pickup device: 1/3-inch IT-type CCD 3-panel system Total number of pixels: 811(H)a508(V) for NTSC Number of effective pixels: 768(H)a494(V) for NTSC Pickup area: 4.8(H)a3.6(V) mm Scanning system: NTSC 2:1 interlace, 525 lines, 60 fields, 30 frames Scanning frequency: 15.734 kHz horizontal, 59.94 Hz vertical Synchronization system: Internal sync/gen-lock Power requirements:DC 12V Power consumption:0.8 A Gen-lock input: 1.0 V [p-p] black burst signal (BNC connector, 50-pin D-sub connector) Video outputs: NTSC composite 1.0 V [p-p]/75 Ω (BNC connector, 50-pin D-sub connector) YC: 1.0 V [p-p] for Y, 0.286 V [p-p] for C (50-pin D-sub connector) Standard illumination: 2,000 lux (3,200K, f/8) Minimum illumination: 1.5 lux (f/1.4, ‘night eye’ mode) S/N ratio: 62 dB (with DNR ON) Horizontal resolution: 800 lines (high band DTL ON) Registration: 0.05% Detail enhancement: Horizontal/vertical (works for both) White balance: Automatically adjusted for A and B in 2 memories, fine adjustment, ATW, 3200K, 5600K Black balance: Automatically adjusted Gain switching: AGC LOW/HIGH, 0 dB to 30 dB, N-Eye Iris: Auto, manual
47 Specifications Electronic shutter: Synchro scan: 60.34 Hz to 15.75 kHz Step shutter: OFF, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 ELC: Target level variable Operation mode selection: halogen light, fluorescent light, outdoor, user Color bars: SMPTE color bars (setup: 0/7.5%) Lens mount: 1/3-inch C mount Switches: Back panel: MENU, ITEM/AWC, YES/ABC, NO/BAR Menu item setting: Gain, Shutter, White Balance, Detail Level (OFF/LOW/HIGH), Corner Detail, Precision Detail Level, Black Stretch, High Light Chroma, Skin Color Detail, Photometric Measurement Method (ALL/CENTER/TOP CUT/BOTTOM CUT/R/L CUT) CCD Read Out Mode (FIELD/FRAME 1/FRAME 2) Clean DNR, Color Bar Setup, Use Mode, Nega/Posi, PC Control Access SpeedAdjustment function: Menu adjustment: R/B Gain, R/B Pedestal, Black Level, Video Level, Detecting Ratio, Genlock Horizontal Phase/Color Phase, Gamma Compensation Level, Knee Compensation Level, White Clip Level, Horizontal Detail Level, Vertical Detail Level, Detail Band Level, Noise Suppress Compensation Level, Level Dependent Compensation Level, Chroma Detail Compensation Level, Dark Detail Compensation Level, Matrix Compensation Level, Flare Correction Level Weight and dimensions indicated are approximate. Specifications are subject to change without notice. $Accessories Connection cable for the camera head and the main unit (3m a1)
F0301W @ Printed in Japan VQT9257P PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 Broadcast PARTS INFORMATION & ORDERING: 9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300
Before attempting to connect, operate or adjust this product, please read these instructions completely. 1/3-inch Camera With Separate Head Model AW- E FOCUS LOCK ENGLISH DEUTSCH FRANÇAIS ITALIANO