Panasonic Camera With Separate Head Aw E300s Operating Instructions

10
FOCUS
LOCK
Less than 4.3 mm
LensCamera head unitConnecting cableMain unit
FOCUS
LOCK
Installation
You must ask your dealer to take charge of installing, adjusting and connecting this
unit.
$Attaching the lens
Remove the lens mount cap, align the lens with the thread ridges on the lens mount and
screw it firmly into place.
OA 1/3-inch C mount type of lens can be used.
Be  absolutely  sure  that  a  lens  whose  mount  threads  extend  no  more  than  4.3  mm
from  the  lens  mount  surface  is  used....

11
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
System Configuration (Connections)
$Connecting equipment with a composite video input
connector
OConnect  the  output  from  the  camera’s  video  output  connector  to  the  video  monitor,
VTR or other such unit which is provided with a composite video input connector.
OUse the AW-PS505 AC adapter for the power supply.
Use the AW-CA4T1 as the DC power...

12
GEN-LOCK
INAUX
INAUTO
75 Ω/Hi-ZAUTO
75 Ω/Hi-ZR/PR /C
OUT OUT
AUDIOSEE MANUAL
VIDEO 1
G/Y/Y VIDEO 2
B/PB /B SYNCS-VIDEO14
23TALLY
CAMERA (MULTI)
CABLE SELECTFUSE250V  1.25A
TALK
INCOM
RECEIVECONTROL
TALLY & INCOM
MULTIOVP
MPX
MPX OUTPUT
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
System Configuration (Connections)
$Connecting a remote control unit (RCU)
OUse  the  AW-CA50A26  RCU  cable  to  connect  the  RCU  (WV-RC700A  or  WV-RC550)
and the camera.
OThe...

13
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
ALL 1
2USER  SETONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
System Configuration (Connections)
$Connecting a remote control box (RCB)
OUse the AW-CA50T10 RCB cable to connect the RCB (WV-CB700A) and the camera.
1Before  proceeding  with  the  connections,  set  the  AC  adapter’s  power  switch  to  OFF
and the RCB ON/OFF switch on the RCB panel to OFF.
2Connect  the  50-pin  end  of  the  RCB...

14
Camera
Camera (or special effects
unit) used to achieve genlockVIDEO OUT
G/L IN
VIDEO OUT
INPUT
Video output
To special effects unit or monitoring
systemGenlock signal (BB)
OUTPUT
WJ-300C video
divider
System Configuration (Connections)
$Connecting multiple cameras (achieving genlock)
OInput the sync signal (BB) to the genlock input connector.
ODo not turn off the power of the camera which is used to achieve genlock.
OThe  genlock  adjustment  must  be  performed  when  genlock  is  to  be  achieved....

15
– +
MENU
ITEM/AWC
YES/ABC
NO/BAROPTION  CARD
VIDEO  OUT
I/F  REMOTE
G/L IN
IRIS
DC12V IN
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
System Configuration (Connections)
$Connections for exercising control from a computer
The AW-CA50T9 PC control cable and the dedicated software program are required for
the camera to be controlled from the computer.  Ask your dealer for details.
VIDEO OUT
AW-CA4T1 
DC power cable75 Ωcoaxial cable
AW-CA50T9 (10 meters) PC control cable
RS-232C Composite...

16
System Configuration (Connections)
$Reference: Model numbers of related equipment
Read  the  operating  instructions  of  the  equipment  concerned  along  with  these
instructions.
Remote control unit: 
WV-RC700A
Remote control unit: 
WV-RC550
Remote control box: 
WV-CB700A
RCU rack-mounting chassis: 
WV-Q70
Connecting cable: 
WV-CA9T5 (D-sub 9-pin—BNC, approx. 5 meters)
Studio cable: 
WV-CA26U15, WV-CA26U30, WV-CA26U100
Cable joint adapter: 
WV-CA26T26
RCB cable: 
AW-CA50T10
RCU able: 
AW-CA50A26
PC...

17
Operating Mode Selection
The user can select the camera’s functions to match the operating conditions from the four
modes which have been preset.  Select the mode that suits the shooting conditions and the
user’s preferences.
Halogen light mode
This mode is suited to shooting indoors at wedding receptions, parties, seminars and other
indoor events.  Its settings can be changed using a simple menu.
Fluorescent light mode
This  mode  is  suited  to  shooting  indoors  under  fluorescent  lighting....

18
¢¢
Use Mode Set¢¢¢
Halogen
Fluorescent
Outdoor
User
RB
RB PED
TOTAL
PEDA
BATW
AWC
AUTOHOLD
ABC
IRISMAN
AUTO1000
S/S
ELC 500
100
OFFSHUTTER SCENE21
3 USER
SET
AUTO/ATWPAINTINGGAIN
Operating Mode Selection
$How to select the operating
mode
OOperations using the camera by itself
1When  the  camera’s  power  is  turned
on  while  the  MENU  switch  is  held
down,  the  Use  Mode  Set  screen
appears on the monitor.
2Each  time  the  MENU  switch,
ITEM/AWC  switch  or  NO/BAR  switch
is  pressed,  the...

19
Operating Procedures
1.Turn on the power to the units concerned.
2.Adjust the subject brightness to the appropriate level.
3.Select the operating mode.
Once  this  mode  is  selected,  it  need  not  be  changed  so  long  as  the  camera  is  to  be
used under the same conditions.
4.Adjust the flange back of the lens, and adjust the iris and focus.
OThis  adjustment  must  be  performed  when  using  the  camera  for  the  first  time  or
when the lens has been changed.
5.Adjust the white balance....