Panasonic Camera Lumix Dmc Zs30 Owners Manual

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 231 -
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB”  (→243) to send a picture to a WEB service.
When sending images to WEB services, such as Facebook or YouTube, the WEB 
service being used must be registered with the “LUMIX CLUB”. Registering multiple WEB 
services will send images to all services simultaneously. (→248)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Web service], and then press 
[MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
 • [Via Network]: (→205)
Use cursor button to select a WEB service you want to 
connect, and then press [MENU/SET]
 • When the connection is complete, the screen is displayed. To change the send  setting, press [DISP .] button. (→214)
Use cursor button to select [SINGLE] or [MULTI] and then 
press [MENU/SET]
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
(Continued on the next page)    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 232 -
Select and send the images
 ■[SINGLE] setting
 Use cursor button to select the picture Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ■[MULTI] setting
  Use cursor button to select the picture, and then press [DISP.] button to set 
(repeat)
 • The setting is canceled when [DISP.] button is pressed again.  Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●Images uploaded to the WEB Service cannot be displayed or deleted with this 
camera. Check images by accessing the WEB Service with your smartphone/tablet or 
computer.
 ●If sending images fails, a report email outlining the failure will be sent to the email 
address registered with “LUMIX CLUB”.
 ●The number of pictures that can be sent by [MULTI] is limited. ●Images may contain personal information that can be used to identify the user , 
such as a title, the time and date when the images was taken, and the location 
where the image was taken. Check this information before uploading images to 
WEB services.
 ●Panasonic assumes no responsibility for the damages resulting from the leakage, 
loss, etc. of images uploaded on WEB services.
 ●When uploading images to the WEB Service, do not delete images from this 
camera, even after they have finished sending, until you have checked that 
they have been properly uploaded to the WEB Service. Panasonic assumes no 
responsibility for the damages resulting from the deletion of images stored in this 
unit.    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 233 -
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
 • Read the operating instructions of your device for details.
When sending images to [External], the following are required:
 • Registration to “LUMIX CLUB”.  (→243) • Address number and access number acquired by the destination External AV device. 
(→249)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Use cursor button to select [Home] or [External], and then 
press [MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
[Via Network] When you want to connect to an AV device via a wireless access 
point. (→205)
[Direct]
 • Only when [Home]  is selected When you want to directly connect an AV device to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection]. 
(→208)
(Continued on the next page)    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 234 -
Use cursor button to select a device you want to connect, and 
then press [MENU/SET]
 • When the connection is complete, the screen is displayed. To change the send setting, press [DISP .] button. (→214)
Use cursor button to select [SINGLE] or [MULTI] and then 
press [MENU/SET]
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
Select and send the images
 ■[SINGLE] setting
 Use cursor button to select the picture Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is 
executed.
 ■[MULTI] setting
  Use cursor button to select the picture, and then press [DISP.] button to set 
(repeat)
 • The setting is canceled when [DISP.] button is pressed again.  Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●The number of pictures that can be sent by [MULTI] is limited.    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 235 -
When sending images to Printer
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-
compatible) *
 printer.
*
  Compliant with the DPS over IP standards. See the following website for information on the 
PictBridge (wireless LAN-compatible) printer. 
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only .)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Printer], and then press  
[MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
[Via Network] When you want to connect to your Printer via a wireless access point. 
(→205)
[Direct] When you want to directly connect your printer to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (→208)
Use cursor button to select a printer you want to connect, and 
then press [MENU/SET]
Select the picture and print (→267)
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
 ●Motion pictures cannot be printed out.    
						

							Wi-Fi
Connecting with a setting you used before   
(Connect from History)VQT4T08
- 236 -
If you want to make a Wi-Fi connection with the setting you used before, you can select it 
from the history, and connect.
 • The number of settings that can be saved in the history is limited. It is recommended that you save frequently used Wi-Fi connection settings in [Favorite Connection].
Press [Wi-Fi] button
Use cursor button to select [History Connection] and press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select the desired connection setting and 
press [MENU/SET]
 • To display the connection detail, press [DISP.] button.
 ■Registering to [Favorite Connection]
If you register a frequently used Wi-Fi connection, you can quickly call it and 
connect.
 Press  Enter a registration name • For details on how to enter characters, refer to “Entering Text”  (→114).
 ●Performing [Reset Wi-Fi Settings] clears the history and the contents saved in 
[Favorite Connection].    
						

							Wi-Fi
Connect from Favorites
VQT4T08- 237 -
You can register a frequently used connection method from your History. • For details on how to register, (→236).
Press [Wi-Fi] button
Use cursor button to select [Favorite Connection] and press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select the desired connection setting and 
press [MENU/SET]
 • To display the connection detail, press [DISP.] button.
 ■Editing registered items
 Press  Use cursor button to select the item and press [MENU/SET]
Item Description
[Remove from 
Favorite] A confirmation screen is displayed. Select [Yes] with cursor button 
and then press [MENU/SET]. 
[Change the Order in 
Favorite] Select the destination with cursor button, and then press  
[MENU/SET].
[Change the 
Registered Name] For details on how to enter characters, refer to “Entering Text” 
(→114).    
						

							Wi-Fi
Transferring pictures automatically  [Smart Transfer]VQT4T08
- 238 -
Transfer recorded images to a PC, an AV device or a Cloud Folder automatically.  • When [Auto Transfer] is set to [ON], the camera automatically uploads recorded pictures. For this reason pictures may be uploaded unintentionally if, for example, you 
share this unit with other people. 
Panasonic assumes no responsibility for any damages 
caused by uploaded images.
 • Panasonic assumes no responsibility for any damages caused by the use of [Smart  Transfer].
 • Electromagnetic waves from the camera can affect instruments and meters. In airplane cabins, hospitals, etc., set [Airplane Mode] to [ON]. (→193)
 ■What you can do with [Smart Transfer]
[Auto Transfer] Transfers pictures automatically while charging.  (→240)
[Transfer Now] Transfers pictures instantly to the specified transfer destination.  (→240)
[Set Destination] Changes transfer destination and settings of pictures.  (→241)
[Charge Priority] Sets whether charging or transfer is prioritized.  (→242)
[Display Log] Displays the date and result of pictures transferred automatically . (→242)    
						

							Wi-Fi
Transferring pictures automatically  [Smart Transfer]VQT4T08
- 239 -
Setting [Smart Transfer]
Select [Wi-Fi Setup] from the [Wi-Fi] menu and press  
[MENU/SET]
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select transfer destination and press 
[MENU/SET]
Select the method for connecting to a wireless access point, 
and set
 • For details (→205).
Set the transfer destination
When [PC] is selected • For details regarding preparation before transfer, read “When sending images to PC”. (→215)
  Use cursor button to select a PC you want to connect, and then press 
[MENU/SET]
  Use cursor button to select the folder you want to send to, and then press 
[MENU/SET]
When [Cloud Sync. Service] is selected
 • For details regarding preparation before transfer, read “When sending images to  [Cloud Sync. Service]”. (→218)
When [A

V device] is selected
 • For details, read “When sending images to AV device”. 

(→222)
 • Select the AV device you want to connect, and then press the [MENU/SET] button.
Use cursor button to select [Auto Transfer] and press  
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
 • Only the images you recorded when [Auto Transfer] is set to [ON] is transferred.    
						

							Wi-Fi
Transferring pictures automatically  [Smart Transfer]VQT4T08
- 240 -
[Smart Transfer]
Preparation: Set [Smart Transfer]. (→239)
Turn off the camera
(When using a power outlet)
Connect the AC adaptor (supplied) and the camera using the 
USB connection cable (supplied), and plug the AC adaptor 
(supplied) into the electrical outlet
(When using a PC)
Connect the camera to a computer using the USB connection 
cable (supplied)
 • [Smart Transfer] starts automatically according to the [Charge Priority]  (→242) 
setting.
 • [Smart Transfer] is not available when the memory card is locked. • Depending on the specifications of the PC, [Smart Transfer] may fail.
 ●Except at the ambient temperature between 0 °C and 40 °C (32 °F to 104 °F), [Smart 
Transfer] may not work.
 ●When [Destination] is set to [PC], the pictures are stored in the incoming folder 
created. (→217)
 ●If there are pictures that are not transferred when [Auto Transfer] is set to [OFF], 
the message that confirms whether to transfer these pictures is displayed. Select a 
desired option.
 ■Transferring pictures now
Preparation: Set [Smart Transfer]. (→239)
Connect the AC adaptor (supplied) and the camera using the 
USB connection cable (supplied), and plug the AC adaptor 
(supplied) into the electrical outlet
 • Switch to Playback Mode.
Select [Wi-Fi Setup] from the [Wi-Fi] menu and press  
[MENU/SET]
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Transfer Now] and press  
[MENU/SET]
 • Confirmation screen is displayed. It is executed when [Yes] is selected.   Exit the menu after it is executed.