Panasonic Camera Lumix Dmc Zs30 Owners Manual

							Application (View)
Playing back still pictures recorded using the burst functionVQT4T08
- 131 -
 ●Burst pictures cannot be displayed as a picture group during [GPS  Area Play] DMC-ZS30 or [Favorite] playback with [Slide Show] or [Filtering Play]. ●The following operation cannot be performed while a representative first burst picture 
is being displayed.
 • [Auto Retouch]    • [Creative Retouch] • [Cropping] of [Playback] menu ●Burst pictures recorded after the total number of still pictures has exceeded 50,000 
will not be grouped. 
If only one still picture is left over in a picture group after deletion or other operations, 
it will not be formed into a group, either.
 ●The burst pictures recorded by another device may not be recognized as picture 
group pictures.
 ●Burst pictures will not be grouped if recorded without setting the clock.    
						

							Application (View)
Different playback methods  [Playback Mode]VQT4T08
- 132 -
Recorded pictures can be played back in a variety of ways. 
To change the Playback Mode, refer to and perform the following steps.
Press [MENU/SET] in playback mode
The menu selection screen is displayed.
Use cursor button to select [Playback Mode] menu and press 
[MENU/SET]
 • The menu type can also be selected by touch operations.
Press   to select the Playback Mode and press [MENU/SET]
[2D/3D Settings] Switches the output format between 2D and 3D pictures. (Only available during HDMI output.)  (→257)
[All] Plays back all pictures. (→45)
[Slide Show] Automatically plays back recorded pictures, one after another. 
(→138)
[Filtering Play] Plays back the pictures after narrowing them down according to 
various conditions. (→133)
[Calendar] Displays the pictures according to the date on which they were 
taken. (→140)
 ●If the pictures displayed with [Slide Show] or [Filtering Play] are narrowed down, 
selecting [All] will cancel the filtering.
 ●The playback method automatically becomes [All] when the camera is turned on, or 
when switching from [Rec] mode to [Playback Mode].
[2D/3D Settings]
 • For switching [Playback Mode] (above)
The playback method for the 3D pictures can be switched. This menu is only displayed 
during HDMI output. For the procedure for playing back a 3D still picture  (→257).     
						

							Application (View)
Selecting pictures to play back  [Filtering Play]VQT4T08
- 133 -
You can narrow down the pictures to be displayed with set filters, such as recording 
dates, categories, or favorite pictures.
Select [Filtering Play] from the [Playback Mode] menu (→132)
Select the filtering method using cursor button, and press 
[MENU/SET]
[Picture Only]Play back still pictures  (→134)
[Video Only] Play back motion pictures  (→134)
[3D Play] Play back only 3D still pictures.  (→134)
[GPS Area 
Play]
*Select the location name of the place where the pictures were taken or the 
landmark name, and play the pictures back.  (→134)
[Map]
*Select the place where the pictures were taken on the map, and play the 
pictures back. (→135)
[Travel] Play back pictures with [Travel Date] that have been set at the time of their 
recording. (→136)
[Category 
Selection] Play back pictures that have been narrowed down by category, such as 
Scene Mode. (→136)
[Select Date] Select the date when the pictures were taken, and play the pictures back. 
(→137)
[Favorite] Play back pictures set as [Favorite]. (→137)
* DMC-ZS30
 ■About operations during [Filtering Play]
During [Filtering Play], the operation when  is pressed in the 1-picture Playback 
screen is different. Select the operation you want to perform and press [MENU/SET].
 • [Retouch]:  Retouching pictures  (→141) • [Burst Play]:  Play back continuously recorded still pictures, one after another  (→130) • [Play Video]:  Play back motion pictures (→49) • [Play Panorama]:  Play back panorama pictures  (→94) • [Filtering Off]:  Switch Playback Mode to [All] (→132) • [Change Date]:  Change recording date to display  (→137)
 ■Cancel filtering
During [Filtering Play], only pictures under the set filters are displayed. 
In the following cases, filtering will be canceled.
 • When the camera is turned off • When switching to Recording Mode • When [All] is selected from the [Playback Mode] menu • When  is pressed in the 1-picture Playback screen and [Filtering Off] is selected.    
						

							Application (View)
Selecting pictures to play back  [Filtering Play]VQT4T08
- 134 -
Narrowing down by selecting picture type
Select picture type, such as still pictures only or motion pictures only , then play them 
back.
Select [Picture Only] / [Video Only] / [3D Play] in [Filtering 
Play] and press [MENU/SET] 
(→133)
[Picture Only] Play back still pictures (Also applies to panorama pictures and continuously 
recorded pictures)
[Video Only] Play back AVCHD motion pictures, MP4 motion pictures, and high-speed 
motion pictures
[3D Play] Plays back 3D still pictures recorded using [3D Photo Mode] Scene Mode
Narrowing down by selecting place name or landmark name of the location where 
the pictures were taken DMC-ZS30
Select place name or landmark name from pictures which have recorded place name 
information, then play back the pictures.
Select [GPS Area Play] in [Filtering Play] and press [MENU/
SET] 
(→133)
Use cursor button to select region and press [MENU/SET]
Use cursor button to select place name or landmark and press 
[MENU/SET]
 ●Place name information (place name and landmark name) may be dif ferent from the 
official names in some cases.
 ●The place name information may be different from the recorded location depending on 
the status of positioning.    
						

							Application (View)
Selecting pictures to play back  [Filtering Play]VQT4T08
- 135 -
Narrowing down by selecting the location where the pictures were taken DMC-ZS30
Specify place on the map, then select from pictures with nearby location information 
recorded and play back.
Preparation:
To use a detailed map to specify a place, copy the map data recorded on the disc 
(supplied) to your card in advance. (→180)
Select [Map] in [Filtering Play] and press [MENU/SET] (→133)
Operate map display so the recording location is in the 
selection
Map scale level
On the touch screen, spread 
(pinch out) your 2 fingers to zoom 
in, and pinch (pinch in) your 
2
 fingers to zoom out.
 • You can also zoom in/out with the zoom lever.
Selection
 •You can drag the screen or press the cursor button to operate the display location of 
a map.
Press [DISP.] button
Place where you took 
the selected picture
Place where you took 
the pictures displayed 
in a list Touch to display another picture
Touch to narrow down the 
pictures to be displayed
Picture list
Touch to display another picture
Press [MENU/SET]
 ●When the map is at its maximum size, you cannot narrow down pictures. ●The place where the picture was taken and recorded location information may dif
fer, 
depending on the status of positioning.    
						

							Application (View)
Selecting pictures to play back  [Filtering Play]VQT4T08
- 136 -
Narrowing down by selecting pictures recorded at a destination
Play back pictures with [Travel Date] (→112) that have been set at the time of their 
recording.
Select [Travel] in [Filtering Play] and press [MENU/SET] (→133)
Use cursor button to select the setting and press [MENU/SET]
[All] Display all pictures that were recorded while [Travel Date] was set
[Travel Date] Display only the pictures recorded on the selected travel date
 Use cursor button to select travel date and press [MENU/SET]
[Location] Display only the pictures recorded at the selected travel destination
 Use cursor button to select travel destination and press [MENU/SET]
Narrowing down by selecting picture category or a person in the picture
Play back pictures that have been narrowed down by category, such as Scene Mode. 
Also, from among the pictures recorded using the Face Recognition function  (→108), select 
a person in the picture and play back.
Select [Category Selection] in [Filtering Play] and press  
[MENU/SET] 
(→133)
Use cursor button to select the setting and press [MENU/SET]
[Face Recog.] Select a person registered to Face Recognition and display the pictures Use cursor button to select a person and press [MENU/SET]
[Portrait etc.] Only display pictures recorded with [Portrait], [Soft Skin], [Night Portrait], 
[Baby] from Scene Mode
*
[Scenery etc.]Only display pictures recorded with Panorama Mode, and [Scenery], 
[Sunset], [Glass Through] from Scene Mode*
[Night Scenery 
etc.]Only display pictures recorded with [Night Portrait], [Night Scenery], 
[Handheld Night Shot], [Starry Sky] from Scene Mode*
[Events]
Only display pictures recorded with [Sports] from Scene Mode
[Baby] Only display pictures recorded with [Baby] from Scene Mode*
[Pet]Only display pictures recorded with [Pet] from Scene Mode
[Food] Only display pictures recorded with [Food] from Scene Mode
[Underwater] Only display pictures recorded with [Underwater] from Scene Mode
[Burst] Only display pictures recorded with 
,  in Burst
*  Even if the scene is auto-detected with [Intelligent Auto] Mode, it will be categorized in the 
same way
.    
						

							Application (View)
Selecting pictures to play back  [Filtering Play]VQT4T08
- 137 -
Narrowing down by selecting recording date
Select the recorded date, and play the pictures back.
Select [Select Date] in [Filtering Play] and press [MENU/SET] 
(→133)
Use cursor button to select recording date and press  
[MENU/SET]
 ■To change the date to display
 Press  in the 1-picture Playback screen Use cursor button to select [Change Date] and press [MENU/SET]
 ●Only months when pictures were taken are shown on the calendar screen. If the clock 
was not set, pictures will be displayed as January 1st, 2013.
 ●Pictures taken with destination settings made in [World Time] are displayed in the 
calendar screen using the appropriate date for the destination’s time zone.
Narrowing down by selecting favorite pictures
Select pictures that were set in [Favorite] from the [Playback] menu, and play the pictures 
back.
Select [Favorite] in [Filtering Play] and press [MENU/SET]  (→133)    
						

							Application (View)
Playing back pictures in order automatically   
[Slide Show]VQT4T08
- 138 -
Automatically play pictures in order and to music. Recommended when viewing on TV 
screen.
Select [Slide Show] from the [Playback Mode] menu (→132)
Use cursor button to select [Start] and press [MENU/SET]
 ■To select pictures for automatic play back
If you have previously selected the pictures to display for [Filtering Play] from the 
[Playback Mode] menu, the Slide Show will play back with the same criteria.
If you want to reselect pictures to play back, use cursor button to select [Filtering], then 
press [MENU/SET].
 • For details on how to narrow down  (→133) • The filtering will not be canceled, even after the Slide Show finishes. • If you select [All], the filtering will be canceled.
 ■To change settings such as music or display time
Use cursor button to select [Setup] and press [MENU/SET]
[Effect]
[NATURAL] / [SLOW] / [SWING] / [URBAN] / [OFF]*
[Duration]*[1SEC] / [2SEC] / [3SEC] / [5SEC]
[Repeat] [ON] / [OFF]
[Sound] [OFF]: Music and audio will not play back.
[AUTO]: 
 With still pictures, music will play back, and with motion pictures, audio 
will play back.
[Music]: Music effect will play back. 
[Audio]: Audio is played back from motion pictures.
*  In the following case, [Effect] is fixed to [OFF].  The [Duration] setting is also disabled. • [Motion Pic. Only]    
						

							Application (View)
Playing back pictures in order automatically  [Slide Show] VQT4T08
- 139 -
 ■Operations during Slide Show
The operation guide appears on the bottom right of the LCD monitor .
Pause/play
Previous
Next
Stop Volume downVolume up
 • If you do not perform any operation for approx. 2 seconds, the operation guide is 
turned off. T o display the guide again, press the [DISP.] button.
 ●When [URBAN] has been selected, the picture may appear in black and white as a 
screen effect.
 ●When panorama pictures are played back, the [Duration] setting is disabled. ●Part of [Effect] cannot be used when displaying pictures on television using an HDMI 
micro cable (optional) or when displaying pictures recorded in portrait position.
 ●Screen effects do not operate during a [3D Play] slide show. ●Music effects cannot be added.    
						

							Application (View)
Searching by recording date  [Calendar]VQT4T08
- 140 -
You can search for pictures by the date they were recorded.
Select [Calendar] from the [Playback Mode] menu (→132)
Touch the recording date to be displayed
Select the month • Only months when pictures were taken are shown on the calendar screen.
Touch [Set] to display a list of pictures from the selected date
Use cursor button to select picture and press [MENU/SET]
 ●If there is more than one picture recorded on the same date, the first picture taken on 
that date will be selected.
 ●You can display the calendar between January 2000 to December 2099. ●Pictures recorded without configuring [Clock Set] will show the date January 1st, 
2013.
 ●Pictures taken with destination settings made in [World Time] are displayed in the 
calendar screen using the appropriate date for the destination’s time zone.