Panasonic Camera Lumix Dmc Zs30 Owners Manual

							Wi-Fi
Send Images While RecordingVQT4T08
- 221 -
 ●Images uploaded to the WEB Service cannot be displayed or deleted with this 
camera. Check images by accessing the WEB Service with your smartphone/tablet or 
computer.
 ●If sending images fails, a report email outlining the failure will be sent to the email 
address registered with “LUMIX CLUB”.
 ●Images may contain personal information that can be used to identify the user , 
such as a title, the time and date when the images was taken, and the location 
where the image was taken. Check this information before uploading images to 
WEB services.
 ●Panasonic assumes no responsibility for the damages resulting from the leakage, 
loss, etc. of images uploaded on WEB services.
 ●When uploading images to the WEB Service, do not delete images from this 
camera, even after they have finished sending, until you have checked that 
they have been properly uploaded to the WEB Service. Panasonic assumes no 
responsibility for the damages resulting from the deletion of images stored in this 
unit.    
						

							Wi-Fi
Send Images While RecordingVQT4T08
- 222 -
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
 • Read the operating instructions of your device for details.
When sending images to [External], the following are required:
 • Registration to “LUMIX CLUB”.  (→243) • Address number and access number acquired by the destination External AV device. 
(→249)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Use cursor button to select [Home] or [External], and then 
press [MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
[Via Network] When you want to connect to an AV device via a wireless access 
point. (→205)
[Direct]
 • Only when [Home]  is selected When you want to directly connect an AV device to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection]. 
(→208)
(Continued on the next page)    
						

							Wi-Fi
Send Images While RecordingVQT4T08
- 223 -
Use cursor button to select a device you want to connect, and 
then press [MENU/SET]
 • When the connection is complete, the screen is displayed. To change the send setting, press [DISP .] button. (→214)
Take pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
You cannot change the settings while sending pictures. W ait until sending is 
complete.    
						

							Wi-Fi
Send Images Stored in the Camera
VQT4T08- 224 -
 • When sending images on a mobile network, high packet communication fees may be incurred depending on the details of your contract.
 • Details of the playback menu [Favorite] or [Print Set] settings will not be sent. • Some images taken with a different camera may not be able to be sent. • Images that have been modified or edited with a computer may not be able to be sent.
When sending images to smartphone/tablet
Preparations: Install the “Image App” in advance.  (→197)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Smartphone], and then press 
[MENU/SET]
(Continued on the next page)    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 225 -
Select a connection method
 ■When you want to connect to the smartphone/tablet via a wireless 
access point
(On your smartphone/tablet)   On the setting menu of your smartphone/tablet, turn on the Wi-Fi function   Select the wireless access point you want to connect to, and set   Start “Image App” on your smartphone/tablet *
 (→197)
(On the camera)
   Use cursor button to select [Via Network], and then press [MENU/SET]   Select the method for connecting to a wireless access point, and set • For details (→205).
 ■When you want to directly connect a smartphone/tablet to this unit
 ●When connecting with [Wi-Fi Direct] or [WPS Connection]
(On the camera)
 Use cursor button to select [Direct], and then press [MENU/SET] • For details (→208).
(On your smartphone/tablet)
 Start “Image App” on your smartphone/tablet *
 (→197)
 ●When connecting with [Manual Connection]
(On the camera)
   Use cursor button to select [Direct], and then press [MENU/SET]   Use buttons to select [Manual Connection], and then press [MENU/SET]
(On your smartphone/tablet)
   On the setting menu of your smartphone/tablet, turn on the Wi-Fi function   Select the SSID that matches the one displayed on the screen of this unit, and 
then enter the password
   Start “Image App” on your smartphone/tablet *
 (→197)
*   A window indicating that the smartphone/tablet is connecting to the camera is displayed. 
Press the “Back” button on Android devices. Select “Close” on iOS devices.
Use cursor button to select the device you want to connect to, 
and then press [MENU/SET]
 • When the connection is established, the screen is displayed. To change the send  setting, press the [DISP .] button. (→214)
(Continued on the next page)    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 226 -
Use cursor button to select [SINGLE] or [MULTI] and then 
press [MENU/SET]
Select and send the images
 ■[SINGLE] setting
 Use cursor button to select the picture Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ■[MULTI] setting
  Use cursor button to select the picture, and then press [DISP.] button to set 
(repeat)
 • The setting is canceled when [DISP.] button is pressed again.  Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●The number of pictures that can be sent by [MULTI] is limited.    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 227 -
When sending images to PC
Preparations:
 • Turn the computer on. • Prepare folders for receiving images on the PC before sending a picture to the PC.   (→217)
 • If the standard settings are changed for the workgroup on the connected PC, you must change settings in [PC Connection] on this unit.  (→251)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [PC], and then press [MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
[Via Network] When you want to connect to your PC via a wireless access point. 
(→205)
[Direct] When you want to directly connect your PC to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (→208)
Use cursor button to select a PC you want to connect, and 
then press [MENU/SET]
Use cursor button to select the folder you want to send to, and 
then press [MENU/SET]
 • When the connection is complete, the screen is displayed. To change the send 
setting, press [DISP .] button. (→214)
(Continued on the next page)    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 228 -
Use cursor button to select [SINGLE] or [MULTI] and then 
press [MENU/SET]
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
Select and send the images
 ■[SINGLE] setting
 Use cursor button to select the picture Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is 
executed.
 ■[MULTI] setting
  Use cursor button to select the picture, and then press [DISP.] button to set 
(repeat)
 • The setting is canceled when [DISP.] button is pressed again.  Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●Folders sorted by the sent date are created in the specified folder , and pictures are 
saved in those folders.
 ●If the screen for a user account and password entry appears, enter the one you set on 
your PC.
 ●The number of pictures that can be sent by [MULTI] is limited.    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 229 -
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (→243) and configure the Cloud Sync. setting  (→219) 
to send a picture to a Cloud Folder.
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
 • You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Press [MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
 • [Via Network]: (→205)
Check the send setting
 • When the connection is complete, the screen is displayed. To change the send  setting, press [DISP .] button. (→214)
Use cursor button to select [SINGLE] or [MULTI] and then 
press [MENU/SET]
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
(Continued on the next page)    
						

							Wi-Fi
Send Images Stored in the CameraVQT4T08
- 230 -
Select and send the images
 ■[SINGLE] setting
 Use cursor button to select the picture Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ■[MULTI] setting
  Use cursor button to select the picture, and then press [DISP.] button to set 
(repeat)
 • The setting is canceled when [DISP.] button is pressed again.  Press [MENU/SET] • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●The number of pictures that can be sent by [MULTI] is limited.