Panasonic Camera Lumix Dmc Zs30 Owners Manual

							Application (View)
Retouching pictures
VQT4T08- 141 -
[Auto Retouch]
You can adjust the color and brightness of a still picture to bring them into balance.
 • New pictures are created after editing pictures with [Auto Retouch]. Before starting to  edit, make sure that there is enough free space in the built-in memory or memory card.
 • Example picture
Select a still picture to retouch during playback and press  
Use cursor button to select [Auto Retouch] and press  
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
 • A confirmation screen is displayed. If you select [Yes], the new retouched still picture is saved.
 • When [OFF] is selected, you can restore a picture to its original condition (before retouching).
 ■Operation from the [Playback] menu
 Select [Retouch] in the [Playback] menu, and then press [MENU/SET] Use cursor button to select [Auto Retouch] and press [MENU/SET] Use cursor button to select picture and press [MENU/SET]
Read Step  above to perform further steps.
 ●The retouch effect may be less apparent in some still pictures. ●Some still pictures may have higher noise levels after retouching.  ●It may not be possible to use [Auto Retouch] with still pictures that have already been 
retouched. 
 ●It may not be possible to retouch still pictures recorded with other cameras. ●You cannot retouch the pictures in a picture group as a group. Retouch each picture in 
a picture group after displaying it.
 ●[Auto Retouch] is unable to perform in the following cases: • Motion pictures • Panorama pictures • 3D still pictures    
						

							Application (View)
Retouching picturesVQT4T08
- 142 -
[Creative Retouch]
You can retouch recorded still pictures by selecting the effect that you want to apply.
 • New pictures are created after editing pictures with [Creative Retouch]. Before starting  to edit, make sure that there is enough free space in the built-in memory or memory 
card.
Select a still picture to retouch during playback and press  
Use cursor button to select [Creative Retouch] and press 
[MENU/SET]
Press   to select effect
 • The picture retouched with the selected effect is displayed. • When [OFF] is selected, you can restore a picture to its original condition (before retouching).
Setting Effect
[Expressive] This picture effect creates a pop art style picture that enhances the color.
[Retro] This picture effect creates the soft appearance of a tarnished picture.
[High Key] This picture effect creates a brighter and lighter toned appearance for the 
entire picture.
[Low Key] This picture effect creates a darker somber appearance for the entire 
picture to emphasize the bright portions.
[Sepia] This picture effect creates a picture with sepia tone.
[Dynamic Monochrome] This picture effect creates a monochromatic picture with a higher 
contrast and more dramatic atmosphere.
[Impressive Art] A picture effect with strong contrast that illustrates a surreal and dramatic 
atmosphere.
[High Dynamic] This picture effect creates a picture with a well-balanced brightness for 
the entire picture (from dark areas to bright areas).
[Cross Process] This picture effect creates a unique atmosphere with surprising colors.
 • Use cursor button to adjust coloring, then press [MENU/SET].
[Toy Effect] This picture ef

fect creates a picture that resembles pictures taken by a 
toy camera with a reduced amount of peripheral light.
 • Use cursor button to adjust coloring, then press [MENU/SET].
(Continued on the next page)    
						

							Application (View)
Retouching picturesVQT4T08
- 143 -
Setting Effect
[Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama.
[Soft Focus] This picture effect creates a soft appearance by intentionally blurring the 
entire picture.
[Star Filter] This picture effect creates a picture with the light from the light source 
that shines in the shape of a cross, creating a gorgeous atmosphere.
[One Point Color] This picture effect creates a monochromatic picture by retaining the color 
you selected only, and adds memorable emphasis to it.
 • Use cursor button to move the frame in the center of the screen, select 
the color to retain, and then press [MENU/SET].
 • For more information about picture effects (→86 - 91) • When you press [DISP.] button, a description of the selected effect is displayed.
Press [MENU/SET]
 • A confirmation screen is displayed. If you select [Yes], the new retouched still picture is saved.
 ■Operation from the [Playback] menu
 Select [Retouch] in the [Playback] menu, and then press [MENU/SET] Use cursor button to select [Creative Retouch] and press [MENU/SET] Use cursor button to select picture and press [MENU/SET]
Read Step  (→142) to perform further steps.
 ●The retouch effect may be less apparent in some still pictures. ●The image effect may appear weak compared to the effect given by the [Creative 
Control] Mode.
 ●It may not be possible to retouch still pictures recorded with other cameras. ●You cannot retouch the pictures in a picture group as a group. Retouch each picture in 
a picture group after displaying it.
 ●[Creative Retouch] is unable to be performed in the following cases: • Motion pictures • Panorama pictures • 3D still pictures    
						

							Application (View)
Using the [Playback] menu
VQT4T08- 144 -
You can specify picture protection, resizing, print settings, and other settings for pictures 
you have taken.
 • For the setting procedures of the menu. (→54) • The setting methods vary depending on the menu item.
 ●In the following cases, new pictures are created after they have been edited. Before 
starting to edit, make sure that there is enough free space in the built-in memory or 
memory card.
 • [Text Stamp] • [Retouch] • [Resize] • [Cropping] ●It may not be possible to set or edit pictures taken with other cameras.
[Location Logging]
You can send location information (latitude and longitude) obtained with your smartphone/
tablet to this unit, and write the location information to the pictures.
 • Location information cannot be written to still pictures in the built-in memory. If you want  to record location information on them, copy the pictures in the built-in memory to a 
memory card, then perform [Location Logging].
Preparation: 
Send location information to this unit from your smartphone/tablet  (→201)
Use cursor button to select [Add Location Data] and press 
[MENU/SET]
Use cursor button to select a period for writing location 
information, and then press [MENU/SET]
 • Confirmation screen is displayed. If you select [Yes], the operation is executed. • Location information is written to the picture. • [] is displayed for pictures that have location information written to it.    
						

							Application (View)
Using the [Playback] menuVQT4T08
- 145 -
 ■Abort writing location information
Press [MENU/SET] while location information is being written • [  ] is displayed for the period of the abort operation. 
If selected again while [  ] is displayed, writing location information will resume where 
it left off.
 ■Delete received location information
 Use cursor button to select [Delete Location Data] and press [MENU/SET]  Use cursor button to select a period for deleting location information, and then press 
[MENU/SET]
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●You can only write location information to pictures recorded with this unit. ●For pictures that already have location information recorded, due to the GPS 
function, etc., they will not be overwritten with location information obtained from your 
smartphone/tablet.
 ●Location information will not be written to pictures that were recorded after you 
selected [Send location data]  (→201).
 ●Location information will not be written to AVCHD motion pictures. ●Location information may not be written if there is not enough free space on your 
card.
 ●If the card is locked, you cannot write location information to pictures or delete 
received location information.    
						

							Application (View)
Using the [Playback] menuVQT4T08
- 146 -
 • For the setting procedures of the menu.  (→54)
[Title Edit]
You can give titles, etc. to your favorite still pictures. 
Use cursor button to select [SINGLE] or [MULTI], and then 
press [MENU/SET]
Select a still picture
 ●[SINGLE]
Use cursor button to select a 
still picture and press  
[MENU/SET] ●[MULTI]  
(up to 100 pictures with the same text) 
Use cursor button to select a still picture and 
press [DISP.] button
 
 [Title Edit] setting
  [Title Edit] already set
 • To cancel   →  Press [DISP.] button 
again.
 • To execute  → Press [MENU/SET].
Enter characters (Entering text (→114))
 • To delete a title, delete all the characters in the character input screen.
 ●Cannot be used in the following cases: • Motion pictures (also applies to high-speed motion pictures) • 3D still pictures ●To print text, use [Text Stamp] or “PHOTOfunSTUDIO” on the supplied disc.
[Edit GPS Data] DMC-ZS30
 • For details (→166).    
						

							Application (View)
Using the [Playback] menuVQT4T08
- 147 -
 • For the setting procedures of the menu.  (→54)
[Text Stamp]
Stamps the recorded pictures with recording date and time, place name information, 
names, travel destination, [Travel Date], recording direction etc. 
DMC-ZS30
The recording date and time, the text registered by [Baby] or [Pet] Scene Mode, [T ravel 
Date] and [Title Edit] are stamped on the still picture. DMC-ZS27
Use cursor button to select [SINGLE] or [MULTI], and then 
press [MENU/SET]
Select a still picture
 ●[SINGLE]
Use cursor button to select a 
still picture and press  
[MENU/SET] ●[MULTI] (up to 100 pictures) 
Use cursor button to select a still picture and 
press [DISP.] button
  [Text Stamp] setting • To cancel  
→  Press [DISP.] button 
again.
 • To execute  → Press [MENU/SET].
Use cursor button to select [Set] and press [MENU/SET]
Use cursor button to select items and press [MENU/SET]  
(→148)
Use cursor button to select settings and press [MENU/SET] 
(→148)
Press [] button
Use cursor button to select [OK] and press [MENU/SET]
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.    
						

							Application (View)
Using the [Playback] menuVQT4T08
- 148 -
 ■Items that can be stamped 
[Shooting Date] [W/O TIME]: Stamp recording date 
[WITH TIME]: Stamp recording date and time 
[Name]
: Stamp name registered in Face Recognition: Stamp name registered in [Baby] or [Pet]
[Location] Stamp location registered in [Setup] menu’s [Travel Date]
[Travel Date] Stamp Travel Date set in [Setup] menu’s [Travel Date] 
[Title] Stamp text registered in [Title Edit]
[Country/Region]
*
Stamp place name information recorded by GPS function • If text such as the location name or landmark name is long, it may not  be possible to stamp all the text.
[State/Prov./County]
*
[County/Township]*
[City/Town/Village]*
[Landmark]*
[Longitude/Latitude]*Stamp location information recorded by GPS function
[Direction]
*Stamp direction of camera when recording
* DMC-ZS30 • Items set to [OFF] are not stamped.
 ●Cannot stamp texts on the following pictures. • Motion pictures • 3D still pictures • Panorama pictures • Still pictures that date or other texts had already been stamped • Still pictures taken without setting clock ●Characters may be cut off on certain printers. ●Text is difficult to read when stamped on pictures of 0.3M or less. ●Do not request date printing in store or make date printing on printer for still 
pictures with date stamps. (Date printing may be overlapping.)    
						

							Application (View)
Using the [Playback] menuVQT4T08
- 149 -
 • For the setting procedures of the menu.  (→54)
[Retouch]
[Auto Retouch]: For details (→141)
[Creative Retouch]: For details  (→142)
[Video Divide]
A single motion picture can be split into 2 parts. This is convenient when you want to keep 
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free 
space on your card, such as when traveling.
Select the motion picture to split with cursor button and then 
press [MENU/SET]
Touch [  ] and pause at the place to split
 • You can also press  to pause.
Touch 
 • A confirmation screen is displayed. Select [Yes] with  cursor button and then press [MENU/SET].
 •The original motion picture that was split does not 
remain. 
(There will only be the 2 motion pictures that were created 
after the split.)
 • You can also press  to split a motion picture.
 ●During splitting, do not turn off the camera or remove the card or battery. If you do so, 
the motion picture may be deleted.
 ●Splitting a motion picture recorded in [MP4] or [High Speed Video] changes the order 
of the pictures. It is recommended to display with [Calendar] (Calendar Playback) or 
[Filtering Play].
 ●It may not be possible to split motion pictures that were recorded with a dif ferent 
camera.
 ●Motion pictures with a short recording time cannot be divided.    
						

							Application (View)
Using the [Playback] menuVQT4T08
- 150 -
 • For the setting procedures of the menu.  (→54)
[Resize]
Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc.
(Still pictures recorded at the smallest recording pixel level cannot be further reduced.)
 ■[SINGLE]
Use cursor button to select [SINGLE] and press [MENU/SET]
Use cursor button to select a still picture and press  
[MENU/SET]
Use cursor button to select size and press [MENU/SET]
Current size
Size after change
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.
(Continued on the next page)