Panasonic Aj Yad250 Operating Instructions Manual

E– 20
ENGLISH
: S-VIDEO signals will not be output to DVCPRO I/F when set-up menu
item No. 807 DIF NSTD IN is set to OFF.
DVCPRO I/F modeVIDEO OUT
MONITOR OUTAUDIO OUT
HEADPHONE
Output EE (LINE/S-VIDEO)Output stop
Output TAPE
Input
Input stop
Output TAPE
Output TAPE
Output TAPE
Output TAPE
Output EE (LINE/S-VIDEO)Output stop
Output stop
Input
Input stop
Output TAPE
Output EE (LINE/S-VIDEO)Output stop
Input
Input stop
Output EE (LINE/S-VIDEO)Output stop
Input
Input stopEE (LINE/S-VIDEO)
Black
TAPE
EE...

E– 21
AJ-D250 VTR modes and input/output statuses
Once this board is installed in the AJ-D250, the displays or operation of
functions for some of the AJ-D250 menu settings or modes may differ from
the time before the board is installed.
VTR modeINPUT SELECT
switch (front
panel) positionS/F/R EE SEL
(set-up menu item
No.102)Input signal
status
Normal signal
No signal
Normal signal
No signal
V InsertLINE/S-VIDEO N/A
A InsertLINE/S-VIDEO N/A
Normal signal
No signal
AV InsertLINE/S-VIDEO N/A
The audio insert...

E– 22
ENGLISHDVCPRO I/F modeVIDEO OUT
MONITOR OUTAUDIO OUT
HEADPHONE
Output stop
Output stop
Output stop
Output stopEE (LINE/S-VIDEO)
Black
TAPE
TAPETAPE
TAPE
EE (AUDIO IN)
EE (AUDIO IN)
Output stop
Output stopEE (LINE/S-VIDEO)
BlackEE (AUDIO IN)
EE (AUDIO IN) 

E– 23
RS-232C
The RS-232C commands are changed as set forth below by
installing the AJ-YAD250P in the AJ-D250.
$Edit control commands
(AJ-D250 Operating Instructions: Page 50)
What is added to the command description notes
Sends data of
computerReturn data from
VTRDescription of command
[STX] EAD:m [ETX]
Parameters
m = 0: CH1 & CH2
1: CH1
2: CH2
No parameter:
CH1 & CH2[STX] EAD [ETX] Sets the VTR to the AUDIO
INSERT PAUSE mode.
When the VTR is in the VIDEO
INSERT PAUSE mode, the
command sets it to the...

E– 24
ENGLISH
RS-232C
$Edit control commands
(AJ-D250 Operating Instructions: Page 50)
What is added to the command description notes
Sends data of
computerReturn data from
VTRDescription of command
[STX] EIN [ETX] [STX] EIN [ETX] Sets the VTR to the VIDEO
INSERT PAUSE mode.
When the VTR is in the AUDIO
INSERT PAUSE mode, the
command sets it to the
AUDIO/VIDEO INSERT PAUSE
mode.  When it is in the REC
INHIBIT mode, error code
ER001 is returned from the VTR
and the VTR is set to the STOP
mode.

OThis...

E– 25
RS-232C
$Input/output control commands
(AJ-D250 Operating Instructions: Page 51)
Sends data of
computerReturn data from
VTR
Description of command
[STX] IEV:data [ETX]Parameters
data = m1m2
m1 = 0
F :
Designates the
data of bit 7 to bit
4.
m2 = 0
F:
Designates the
data of bit 3 to bit
0.[STX] IEV [ETX]
Parameter m1 (HEX display) m2 (HEX display)
Bits supportedBIT
7BIT
6BIT
5BIT
4BIT3
Switching data0000AUDIO
CH1
BIT2
AUDIO
CH2BIT1
VIDEOBIT0
TC
What is added to the command description notes
Forcibly...

E– 26
ENGLISH
RS-232C
What is added to the parameters used with data
transmitted by a personal computer
$Query control commands
(AJ-D250 Operating Instructions: Page 61)
Sends data of
computerReturn data from
VTRDescription of command
[STX] QRV:m [ETX]
Parameters
m =
A: AV system control
ROM version
S: Sub-code
microcomputer
version
C: Cylinder servo
ROM version
R: Reel servo ROM
version
I: Interface ROM
version
D: Digital video
interface board
ROM version
No parameter:
Interface ROM
version[STX] VERdata...

E– 27
RS-232C
New commands which are added
Sends data of
computerReturn data from
VTRDescription of command
[STX] RPS:m [ETX]
Parameters
m =
1: 100 Mbps
2: 200 Mbps[STX] RPS [ETX] This sets the DVCPRO I/F
transmission rate.
[STX] RPI:data [ETX]
Parameters
data =
0x00
0x3F
(Input channel)[STX] RPI [ETX] This selects the DVCPRO I/F
input channel.
[STX] RPO:data [ETX]Parameters
data =
0x00
0x3F
(Output channel)[STX] RPO [ETX] This selects the DVCPRO I/F
output channel.
[STX] ADR:m [ETX]
Parameters
m =
S:...

E– 28
ENGLISH
RS-232C
New commands which are added
Sends data of
computerReturn data from
VTRDescription of command
[STX] QRP [ETX] [STX] RPSm [ETX]
Parameters
m =
1: 100 Mbps
2: 200 MbpsThis queries the DVCPRO I/F
transmission rate.
[STX] QRI [ETX][STX] RPIdata [ETX]Parameters
data =
0x00
0x3F
(Input channel)This queries the DVCPRO I/F
input channel.
[STX] QRO [ETX][STX] RPOdata [ETX]Parameters
data =
0x00
0x3F
(Output channel)This queries the DVCPRO I/F
output channel.
[STX] QAR [ETX] [STX] ADRm [ETX]...

E– 29
Error Messages
The following error messages are added by installing the AJ-
YAD250P in the AJ-D250.
E – 02This appears on the front panel while ERASE (all data
erase) is being executed.  In addition, “E” is displayed on
the first row (counter value display area) on the monitor
screen.
When T&S&R has been selected as the setup menu
No.001 (DISPLAY SEL) setting, “ERASE” is displayed on
the third row (remaining tape display area) on the
superimposed screen, and “--:--:--:--” appears as the
counter...