Panasonic Aj Sd965 Operating Instructions Manual

51
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescriptionNo./ItemDescription
600
INT SGThis selects the internal reference signal.
0001 BB:
The black burst is generated.
0002 CB100:
100% color bars are generated.
0003CB75:
75% color bars are generated.
601
OUT VSYNC This selects whether to float the vertical sync
position of the video output in order to align
the video output phase with the input in the
EE/record/edit modes.
0000N-VF:
Signals are not...

52
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescription
621
CCR MODEThis selects the cross color processing
during playback.
0000 OFF:
The cross color is output with no changes
made.
0001 ON:
The cross color can be reduced.

This setup menu is not displayed in the 625i
system.
620
ESR MODE This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.
0000 OFF:
The mode is forcibly set to OFF.
0001AUTO:
The mode is...

53
624
CC RECFor selecting whether to record the closed
caption signals multiplexed on the input
signals on the tape.
0000OFF:
No closed caption signal is recorded.
In addition, the EE output signals are blanked.
0001 ON:
When a closed caption signal is detected from
the selected input signal, it can be recorded.

O If 1394 signals have been selected as the
input signals, the closed caption signals which
have been multiplexed onto the input signals
will be recorded on the tape regardless of the
setting....

54
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescription
660
UMID RECThis selects whether or not to record the
UMID information on the tape.
0000 OFF:
UMID information is not recorded on the tape.
In addition, EE output signals are blanked.
0001ON:
UMID information is recorded on the tape.

O If 1394 has been selected as the input signals
using the INPUT SELECT button, the UMID
information on the input signals will be
recorded regardless of this menu’s...

55
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescriptionNo./ItemDescription
701
CH1 IN LVThis selects the audio input (CH1) reference
level switching.
0000 4dB
00010dB0002
–20dB
702
CH2 IN LV This selects the audio input (CH2) reference
level switching.
0000 4dB
00010dB0002
–20dB
703
CH3 IN LV This selects the audio input (CH3) reference
level switching.
0000 4dB
00010dB0002
–20dB
704
CH4 IN LV This selects the audio input (CH4) reference
level...

56
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescriptionNo./ItemDescription
721
MONI CH SELThis selects  the monitor output.
0000 MANU:
The output signal is as selected in MONITOR
SELECT buttons.
0001AUTO:
PCM AUDIO output is selected within the
–0.43 (–0.5)a to +1aspeed range; CUE is
automatically selected for all other tape
speeds. 
The value for the DV/DVCAM tape is shown in
parenthesis (    ).
0002 PCM:
The PCM AUDIO signal is output over the
–10a to...

57
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescription
750
DV PB ATTThis selects the audio output level during DV
playback.
0000 OFF:
The audio output level is not
attenuated.
0001ON:The audio output level is
attenuated (reduced).
751
REC PT MUTE This selects whether to mute the sound
where recordings are joined during
DV/DVCAM playback.
0000OFF:
The sound is not muted.0001 ON:The sound is muted.

The table below shows how the CUE output to the monitor...

58
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescription
800
ADD LINE 25
00
REC LINE1
Sub-screen For selecting the mode for recording signals
on additional lines.
0000 OFF:
No signals are recorded on
additional lines.
0001 YC422:The 422 mode signals are
recorded on 1 line.
0002YC411:The 411 mode signals are
recorded on 1 line.
0003 Y1_B/W:Only the Y signal is recorded on
1 line directly.
0004 Y1_BPF:Only the Y signal is recorded on
1 line after it has...

59
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescriptionNo./ItemDescription
Sub-screen801
ADD LINE 50
00
REC LINE1
Sub-screen For selecting the mode for recording signals
on additional lines.
0000 OFF:
No signals are recorded on
additional lines.
0001YC422:The 422 mode signals are
recorded on 2 lines.
0002 Y4_B/W:Only the Y signal is recorded on
4 lines directly.
0003 Y4_BPF:Only the Y signal is recorded on
4 lines after it has been
separated from the C...

60
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescription
803
TELETEXT
DETFor selecting the method used to detect the
lines in which the teletext signals are to be
recorded.
0000OFF:
The teletext signals are not recorded.
0001 AUTO:
The teletext signals are automatically detected
and recorded.
0002 MANU:
The lines in which the teletext signals are to
be recorded are selected and set.

O The number of lines in which the teletext
signals can be recorded...