Panasonic Aj Sd965 Operating Instructions Manual

31
Audio split editing(continued)
$ Duration display
The duration can be indicated on the display panel
only.
Between the video IN and OUT points: Press the IN button and OUT button at the same
time.
Between the audio IN and OUT points: Press the A IN button and A OUT button at the
same time.
Match frame processing system
When two VTRs are used to perform the audio split
editing operations, there will be a total of 8 edit
points: the video IN and OUT points for the player,
the video IN and OUT points for...

32
4After selecting VTR used as the player by pressing
PLAYER button, set the initial speed by the search
dial while pressing SET button.
5Simultaneously pressing both SET button and
PREVIEW/REVIEW button results in automatic
prerolling for the both VTRs (player and recorder),
then the player VTR is operated at the set initial
speed up to the IN point.
6After passing the IN point, turn the search dial to
memorize the playback speed of the VTR used as
the player.
7When the tape has passed the OUT point...

33
PF (Programmable Function) functions
1Press  (SHIFT + RECORDER).
The setup menu screen appears on the LCD
monitor, and the setup menu item number appears
on the counter display.
OThe setup menu screen is also displayed on the
TV monitor which has been connected to the
VIDEO OUT 3 connector or SDI OUT 3
connector.MENU
4Turn the search dial to move the cursor (2 ) to the
item to be registered.
5Press the STOP button.
The display screen returns to the status in step 
2,
and the registered item is...

34
4Upon completion of the setting, release the search
button.
The item number now flashes.
OWhen the search dial is in the SHTL mode, the
item will move unless the dial is set to the center
position.
5When other items are to be changed, repeat steps
2to 4.
6Press the SET button.
The changes are stored in the memory.
To disregard the new settings and restore the
old settings instead, press the RECORDER
button.
OTo return the setup contents to the factory
settings (initial settings), press the RESET...

35
Setup menus
1Press the  (SHIFT+RECORDER).MENU
2When the FF button is pressed while holding down
the SHIFT button, the next user file is selected;
conversely, when the REW button is pressed while
holding down the SHIFT button, the previous user
file is selected.
3To enter the selection made in step 2for the user
file which is to be used, press the SET button.
The user file is changed and stored in the memory.
This VTR can hold five user files, each of which has its
own specific menu settings, and one...

36
Setup menus(continued)
1Press the  (SHIFT+RECORDER).MENU
2Press the REW button or FF button while holding
down the SHIFT button to select the USER1 file.
4Turn the search dial while holding down the search
button to select the user file whose contents are to
be loaded into USER1.
6Press the PLAY button.
The settings of the user file selected in step 
4are
loaded, and the USER1 menu display appears. If
the STOP button is pressed instead, the settings
are not changed, and the USER1 menu display...

37
Setup menus(continued)
1Press the  (SHIFT+RECORDER).MENU
2Press the REW button or FF button while holding
down the SHIFT button to select the USER1 file.
4Turn the search dial while holding down the search
button to select the user file in which the contents of
USER1 are to be saved.Those user files which
have been set to the lock mode do not appear on
the display. If all the user files have been set to the
lock mode, the “LOCKED” display appears, and the
contents of USER1 cannot be saved into any of...

38
Setup menus(continued)
SYSTEM menu
No./Item Description
The underlined items indicates the initial setting.
00
WFM SEL This selects the signal to output from the
VIDEO OUT 2 connector.
0000 CTL:
The CTL signal is output.0001 TC:The TIME CODE signal is
output.
0002VIDEO:The VIDEO OUT signal is
output.
0003 RF_L:The PB L RF signal is output.0004 RF_R:The PB R RF signal is output.0005 ENV_L:The PB L ENV signal is output.0006 ENV_R:The PB R ENV signal is output.

O The settings can be changed at any time...

39
Setup menus(continued)
The underlined items indicates the initial setting.
SYSTEM menu
No./ItemDescription
18
SYS H OFFSETSystem phase adjustment.
0000 –3:
–13.4 µsec0001 –2:–8.96 µsec0002 –1:–4.52 µsec00030:0 sec0004 1:+4.52 µsec0005 2:+8.96 µsec0006 3:+13.4 µsec

Factory settings will remain unchanged even if
an attempt is
19
SYS SC/H This sets whether the system phase is to be
adjusted by the unit or from the external
encoder remote controller.
0000REMOTE:
The system phase is adjusted from the...

40
Setup menus(continued)
The underlined items indicates the initial setting.
USER menu
No./ItemDescription
000
P-ROLL TIMEThis sets the preroll time.
The preroll time can be set from 0 to 15 seconds
in 1-second increments.
0000 0s
::
0005
5s::
0015 15s
001
LOCAL ENA This selects the buttons on the front panel
which can be operated when the REMOTE
button is set to the remote mode (REMOTE
lamp ON).
0000 DIS:
No buttons can be operated.
0001ST&EJ:
Only the STOP and EJECT buttons can be
operated.
0002 ENA:...