Panasonic Aj D250 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj D250 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
RS-232C
$Media operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] HRE:m [ETX]
Parameters
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECT[STX] HRE [ETX] Sets the VTR’s operation mode when the tape end position
is reached during recording.
This command is ignored while a search control command
is being processed.
[STX] HTE:m [ETX]
Parameters
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECT[STX] HTE [ETX] Sets the VTR’s operation mode when the tape...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-50.png "Page 51
51
RS-232C
$Media operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] HRE:m [ETX]
Parameters
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECT[STX] HRE [ETX] Sets the VTR’s operation mode when the tape end position
is reached during recording.
This command is ignored while a search control command
is being processed.
[STX] HTE:m [ETX]
Parameters
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECT[STX] HTE [ETX] Sets the VTR’s operation mode when the tape...")
51 RS-232C $Media operation control commands Sends data of computer Return data from VTRDescription of command [STX] HRE:m [ETX] Parameters m = S: STOP R: REWIND E: EJECT M: REWIND and EJECT[STX] HRE [ETX] Sets the VTR’s operation mode when the tape end position is reached during recording. This command is ignored while a search control command is being processed. [STX] HTE:m [ETX] Parameters m = S: STOP R: REWIND E: EJECT M: REWIND and EJECT[STX] HTE [ETX] Sets the VTR’s operation mode when the tape...
Page 52
![Page 52
52
RS-232C
$Operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] OAF [ETX] [STX] OAF [ETX] Advances the tape frame by frame in the forward direction.
[STX] OAR [ETX] [STX] OAR [ETX] Advances the tape frame by frame in the reverse direction.
[STX] OFF [ETX] [STX] OFF [ETX] Fast forwards the tape.
[STX] OPA [ETX] [STX] OPA [ETX] Sets the VTR to the pause mode (REC PAUSE or PLAY
PAUSE) or the pause release mode (REC or PLAY).
[STX] ORC [ETX] [STX] ORC [ETX] Sets...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-51.png "Page 52
52
RS-232C
$Operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] OAF [ETX] [STX] OAF [ETX] Advances the tape frame by frame in the forward direction.
[STX] OAR [ETX] [STX] OAR [ETX] Advances the tape frame by frame in the reverse direction.
[STX] OFF [ETX] [STX] OFF [ETX] Fast forwards the tape.
[STX] OPA [ETX] [STX] OPA [ETX] Sets the VTR to the pause mode (REC PAUSE or PLAY
PAUSE) or the pause release mode (REC or PLAY).
[STX] ORC [ETX] [STX] ORC [ETX] Sets...")
52 RS-232C $Operation control commands Sends data of computer Return data from VTRDescription of command [STX] OAF [ETX] [STX] OAF [ETX] Advances the tape frame by frame in the forward direction. [STX] OAR [ETX] [STX] OAR [ETX] Advances the tape frame by frame in the reverse direction. [STX] OFF [ETX] [STX] OFF [ETX] Fast forwards the tape. [STX] OPA [ETX] [STX] OPA [ETX] Sets the VTR to the pause mode (REC PAUSE or PLAY PAUSE) or the pause release mode (REC or PLAY). [STX] ORC [ETX] [STX] ORC [ETX] Sets...
Page 53
![Page 53
53
RS-232C
$Operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] OSD [ETX] [STX] OSD [ETX] Controls the tape playback speed.
Set the VTR to the STILL PAUSE mode using the OSL
command, and send the OSD command. Each time the
OSD command is sent, the playback speed shifts by one
setting in the direction of the arrows below.
If the lowest playback speed is already set, the speed does
not shift any further, and error code ER001 is returned from
the VTR.
In the...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-52.png "Page 53
53
RS-232C
$Operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] OSD [ETX] [STX] OSD [ETX] Controls the tape playback speed.
Set the VTR to the STILL PAUSE mode using the OSL
command, and send the OSD command. Each time the
OSD command is sent, the playback speed shifts by one
setting in the direction of the arrows below.
If the lowest playback speed is already set, the speed does
not shift any further, and error code ER001 is returned from
the VTR.
In the...")
53 RS-232C $Operation control commands Sends data of computer Return data from VTRDescription of command [STX] OSD [ETX] [STX] OSD [ETX] Controls the tape playback speed. Set the VTR to the STILL PAUSE mode using the OSL command, and send the OSD command. Each time the OSD command is sent, the playback speed shifts by one setting in the direction of the arrows below. If the lowest playback speed is already set, the speed does not shift any further, and error code ER001 is returned from the VTR. In the...
Page 54
![Page 54
54
RS-232C
$Operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] OSU [ETX] [STX] OSU [ETX] Controls the tape playback speed.
Set the VTR to the STILL PAUSE mode using the OSL
command, and send the OSU command. Each time the
OSU command is sent, the playback speed shifts by one
setting in the direction of the arrows below.
If the highest playback speed is already set, the speed does
not shift any further, and error code ER001 is returned from
the VTR.
In the...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-53.png "Page 54
54
RS-232C
$Operation control commands
Sends data of computer Return data from VTRDescription of command
[STX] OSU [ETX] [STX] OSU [ETX] Controls the tape playback speed.
Set the VTR to the STILL PAUSE mode using the OSL
command, and send the OSU command. Each time the
OSU command is sent, the playback speed shifts by one
setting in the direction of the arrows below.
If the highest playback speed is already set, the speed does
not shift any further, and error code ER001 is returned from
the VTR.
In the...")
54 RS-232C $Operation control commands Sends data of computer Return data from VTRDescription of command [STX] OSU [ETX] [STX] OSU [ETX] Controls the tape playback speed. Set the VTR to the STILL PAUSE mode using the OSL command, and send the OSU command. Each time the OSU command is sent, the playback speed shifts by one setting in the direction of the arrows below. If the highest playback speed is already set, the speed does not shift any further, and error code ER001 is returned from the VTR. In the...
Page 55
![Page 55
55
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QAL [ETX] [STX] ALV0 [ETX] Supports only address level 0 of the MIS standards.
[STX] QAO [ETX] [STX] AOm [ETX]
m = 1: CH1
2: CH2
3: CH3
4: CH4
5: CH1 & CH2
6: CH3 & CH4
7: CH1+3 & CH2+4Queries the audio signal output channel or channels.
[STX] QCA [ETX] [STX] CUPdata [ETX]
data = U7U6U5U4U7U3U2U1U0Queries the user’s bit data which was preset in the TCG.
[STX] QCB [ETX] [STX] CUSdata [ETX]
data =...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-54.png "Page 55
55
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QAL [ETX] [STX] ALV0 [ETX] Supports only address level 0 of the MIS standards.
[STX] QAO [ETX] [STX] AOm [ETX]
m = 1: CH1
2: CH2
3: CH3
4: CH4
5: CH1 & CH2
6: CH3 & CH4
7: CH1+3 & CH2+4Queries the audio signal output channel or channels.
[STX] QCA [ETX] [STX] CUPdata [ETX]
data = U7U6U5U4U7U3U2U1U0Queries the user’s bit data which was preset in the TCG.
[STX] QCB [ETX] [STX] CUSdata [ETX]
data =...")
55 RS-232C $Query control commands Sends data of computer Return data from VTRDescription of command [STX] QAL [ETX] [STX] ALV0 [ETX] Supports only address level 0 of the MIS standards. [STX] QAO [ETX] [STX] AOm [ETX] m = 1: CH1 2: CH2 3: CH3 4: CH4 5: CH1 & CH2 6: CH3 & CH4 7: CH1+3 & CH2+4Queries the audio signal output channel or channels. [STX] QCA [ETX] [STX] CUPdata [ETX] data = U7U6U5U4U7U3U2U1U0Queries the user’s bit data which was preset in the TCG. [STX] QCB [ETX] [STX] CUSdata [ETX] data =...
Page 56
![Page 56
56
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QCE [ETX] [STX] CTEdata [ETX]
data = hhmmssff
hh = 00
23: Hours
mm = 0059: Minutes
ss = 0059: Seconds
ff = 0029: FramesQueries the time data which was preset in the TCG.
[STX] QCS [ETX] [STX] CTSdata [ETX]
data = hhmmssff
hh = 00
23: Hours
mm = 0059: Minutes
ss = 0059: Seconds
ff = 0029: FramesQueries the TCG’s time data.
[STX] QCT [ETX] [STX] CTdata [ETX]
data = mm
mm = FR: Regeneration mode
RP:...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-55.png "Page 56
56
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QCE [ETX] [STX] CTEdata [ETX]
data = hhmmssff
hh = 00
23: Hours
mm = 0059: Minutes
ss = 0059: Seconds
ff = 0029: FramesQueries the time data which was preset in the TCG.
[STX] QCS [ETX] [STX] CTSdata [ETX]
data = hhmmssff
hh = 00
23: Hours
mm = 0059: Minutes
ss = 0059: Seconds
ff = 0029: FramesQueries the TCG’s time data.
[STX] QCT [ETX] [STX] CTdata [ETX]
data = mm
mm = FR: Regeneration mode
RP:...")
56 RS-232C $Query control commands Sends data of computer Return data from VTRDescription of command [STX] QCE [ETX] [STX] CTEdata [ETX] data = hhmmssff hh = 00 23: Hours mm = 0059: Minutes ss = 0059: Seconds ff = 0029: FramesQueries the time data which was preset in the TCG. [STX] QCS [ETX] [STX] CTSdata [ETX] data = hhmmssff hh = 00 23: Hours mm = 0059: Minutes ss = 0059: Seconds ff = 0029: FramesQueries the TCG’s time data. [STX] QCT [ETX] [STX] CTdata [ETX] data = mm mm = FR: Regeneration mode RP:...
Page 57
![Page 57
57
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QEB [ETX] [STX] EABm [ETX]
m = N: AUTO BACK ON
F: AUTO BACK OFFQueries the auto back recording setting.
[STX] QHE [ETX] [STX] HTEm [ETX]
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECTQueries the VTR’s operation mode when the tape end
position has been reached during any operation except
recording.
[STX] QHT [ETX] [STX] HREm [ETX]
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECTQueries the...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-56.png "Page 57
57
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QEB [ETX] [STX] EABm [ETX]
m = N: AUTO BACK ON
F: AUTO BACK OFFQueries the auto back recording setting.
[STX] QHE [ETX] [STX] HTEm [ETX]
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECTQueries the VTR’s operation mode when the tape end
position has been reached during any operation except
recording.
[STX] QHT [ETX] [STX] HREm [ETX]
m = S: STOP
R: REWIND
E: EJECT
M: REWIND and EJECTQueries the...")
57 RS-232C $Query control commands Sends data of computer Return data from VTRDescription of command [STX] QEB [ETX] [STX] EABm [ETX] m = N: AUTO BACK ON F: AUTO BACK OFFQueries the auto back recording setting. [STX] QHE [ETX] [STX] HTEm [ETX] m = S: STOP R: REWIND E: EJECT M: REWIND and EJECTQueries the VTR’s operation mode when the tape end position has been reached during any operation except recording. [STX] QHT [ETX] [STX] HREm [ETX] m = S: STOP R: REWIND E: EJECT M: REWIND and EJECTQueries the...
Page 58
![Page 58
[STX] QLH:m [ETX]
Parameters
m = D: Cumulative drum rotation
time
T: Cumulative capstan rotation
time
No parameter:
Cumulative drum rotation
time (4 digits)[STX] LHRdata [ETX]
data = mhhhhh
m = D: Drum
T: Capstan
hhhhh = 00000
99999:
Cumulative rotation time
OWith no parameter
The drum’s cumulative rotation time
is returned as a 4-digit value.
data = hhhh
hhhh = 0000
9999:
Cumulative rotation timeQueries the current value of the hours meter.
[STX] QOT [ETX] [STX] OTEm [ETX]
m = E:
E-E (Electric...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-57.png "Page 58
[STX] QLH:m [ETX]
Parameters
m = D: Cumulative drum rotation
time
T: Cumulative capstan rotation
time
No parameter:
Cumulative drum rotation
time (4 digits)[STX] LHRdata [ETX]
data = mhhhhh
m = D: Drum
T: Capstan
hhhhh = 00000
99999:
Cumulative rotation time
OWith no parameter
The drum’s cumulative rotation time
is returned as a 4-digit value.
data = hhhh
hhhh = 0000
9999:
Cumulative rotation timeQueries the current value of the hours meter.
[STX] QOT [ETX] [STX] OTEm [ETX]
m = E:
E-E (Electric...")
[STX] QLH:m [ETX] Parameters m = D: Cumulative drum rotation time T: Cumulative capstan rotation time No parameter: Cumulative drum rotation time (4 digits)[STX] LHRdata [ETX] data = mhhhhh m = D: Drum T: Capstan hhhhh = 00000 99999: Cumulative rotation time OWith no parameter The drum’s cumulative rotation time is returned as a 4-digit value. data = hhhh hhhh = 0000 9999: Cumulative rotation timeQueries the current value of the hours meter. [STX] QOT [ETX] [STX] OTEm [ETX] m = E: E-E (Electric...
Page 59
![Page 59
59
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QOP [ETX] [STX] data [ETX]
data =
OSP: STOP
OEJ: EJECT
OFF: FAST FORWARD
ORW: REWIND
OSF: SHUTTLE FORWARD
OSR: SHUTTLE REVERSE
OSS: STILL
OPL: PLAY
OPP: PLAY PAUSE
ORC: REC
ORP: REC PAUSE
OBF: STANDBY OFF
SCS: COUNTER SEARCH (STILL)
SCP: COUNTER SEARCH (PLAY)
SRS: COUNTER SEARCH (STILL)
SUB: UB SEARCH
SPT: PLAY to
OPT: PLAY to
SMS: MEMORY SEARCH
EAD: AUDIO INSERT
EAP: AUDIO INSERT PAUSE
EIN: VIDEO...](http://img.usermanuals.tech/thumb/58/67898/w300_aj-d250_en_om_d-58.png "Page 59
59
RS-232C
$Query control commands
Sends data of computer Return data from VTRDescription of command
[STX] QOP [ETX] [STX] data [ETX]
data =
OSP: STOP
OEJ: EJECT
OFF: FAST FORWARD
ORW: REWIND
OSF: SHUTTLE FORWARD
OSR: SHUTTLE REVERSE
OSS: STILL
OPL: PLAY
OPP: PLAY PAUSE
ORC: REC
ORP: REC PAUSE
OBF: STANDBY OFF
SCS: COUNTER SEARCH (STILL)
SCP: COUNTER SEARCH (PLAY)
SRS: COUNTER SEARCH (STILL)
SUB: UB SEARCH
SPT: PLAY to
OPT: PLAY to
SMS: MEMORY SEARCH
EAD: AUDIO INSERT
EAP: AUDIO INSERT PAUSE
EIN: VIDEO...")
59 RS-232C $Query control commands Sends data of computer Return data from VTRDescription of command [STX] QOP [ETX] [STX] data [ETX] data = OSP: STOP OEJ: EJECT OFF: FAST FORWARD ORW: REWIND OSF: SHUTTLE FORWARD OSR: SHUTTLE REVERSE OSS: STILL OPL: PLAY OPP: PLAY PAUSE ORC: REC ORP: REC PAUSE OBF: STANDBY OFF SCS: COUNTER SEARCH (STILL) SCP: COUNTER SEARCH (PLAY) SRS: COUNTER SEARCH (STILL) SUB: UB SEARCH SPT: PLAY to OPT: PLAY to SMS: MEMORY SEARCH EAD: AUDIO INSERT EAP: AUDIO INSERT PAUSE EIN: VIDEO...
Page 60
60 RS-232C OBitmap table (A) ADDRESS BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0 AD 000CASSETTE OUTRF VIDEO MISSINGTAPE TROUBLEHARD ERROR0LOCAL or MENU AD 1STANDBY 0 STOP EJECT REW FF REC PLAY AD 2SERVO LOCK 0 SHUTTLE 0 0TAPE DIRECTIONSTILLCUE UP COMPLETE AD 300000000 AD 4SELECT EE FULL EE 0 EDIT 0 0 0 CUE UP AD 50 INSERT 0 VIDEO 0 0 AUDIO CH2 AUDIO CH1 AD 60 LAMP STILL LAMP FWD LAMP REWLAMP SPEED3LAMP SPEED2LAMP SPEED1LAMP SPEED0 AD 700000000 AD 80 0 0 0 0 0 0 REC INHIBIT AD 900000000 AD A00000000 AD...