Panasonic 3D Eyewear TY-ER3D4MU, TY-ER3D4SU Operating Instructions

							Operating Instructions
3D Eyewear
  Model No.  TY-ER3D4MU
    TY-ER3D4SU
This product cannot be used as sunglasses. 
ENGLISH
FRANÇAIS ESPAÑOL
TQZJ403 
						

							ENGLISH
2
Thank you for purchasing a Panasonic 
product. 
 
 
Before operating this product, please read the instructions 
carefully, and save this manual for future use.
 
 
Before using this product, be sure to read “Safety Precautions” 
and “Using Precautions” (
 pages 2 - 7).
This 3D Eyewear can be used for Panasonic HDTVs 
supporting 3D and Bluetooth® Wireless technology, 
that have the logo as shown below. ( page 22)
For the latest information on applicable models, visit 
our web site.
http://panasonic.net/
Safety Precautions
Warning
Heating
„„ Do not dispose of 3D Eyewear in fire, expose to heat 
or leave Eyewear in places that can get hot.
3D Eyewear contains a lithium-ion polymer rechargeable battery.
Heating may result in combustion or rupture the battery that could cause 
burns or fire.
Place
„„Do not use 3D Eyewear in hospital or other medical 
facilities.
Radio waves from 3D Eyewear may cause interference of medical 
equipments.
„„Do not use 3D Eyewear nearby automatic control 
equipments, like a automatic door, a fire alarm 
apparatus, etc.
Radio waves from 3D Eyewear may cause interference of automatic 
control equipments.
„„Keep 3D Eyewear more than 22 cm (9 in.) away 
from the implant of cardiac pacemaker, or similar 
implantable medical equipments, at all times.
Radio waves from 3D Eyewear may affect implantable cardiac 
pacemaker or similar equipment operations. 
						

							ENGLISH
3
Accidental Ingestion
„„Keep 3D Eyewear parts in places out of the reach of 
children.
There is a danger small children could swallow such parts by mistake.
•  If a child accidentally swallows such parts, seek immediate medical 
attention.
Disassembly
„„Do not disassemble or modify the 3D Eyewear.When disposing this product, refer to “Disposal” ( page 11 - 13) 
for proper removal and disposal of the rechargeable battery.
Charging
„„ Charge by connecting the included charging cable to 
the USB terminal of a Panasonic TV supporting 3D.
Charging with other devices may result in battery leakage, overheating 
or rupture.
„„Do not use the included charging cable for uses other 
than charging 3D Eyewear.
Doing so may result in overheating, combustion or damage.
Caution
3D Eyewear
„„Handle the 3D Eyewear carefully and store in a case 
when not in use.
Failure to do so may damage the Eyewear and glass section, which may 
result in injury.
„„Handle the tips of the frame carefully when putting on 
the 3D Eyewear as inserting the tip of the frame into 
the eye may cause injury.
„„ Always keep the 3D Eyewear in a cool, dry place.
Failure to do so may cause fire or electric shock.
„„Be careful not to close the hinge section of the 
3D Eyewear on your finger.
Doing so may result in injury.
•  Provide supervision when children are using this product.
(continued overleaf) 
						

							ENGLISH
4
Use of 3D Eyewear
„„Parents/guardians should monitor children’s viewing 
habits to avoid their prolonged use without rest 
periods.
„„ In commercial application and public viewing, 
someone in authority should convey the precautions 
and monitor the user of the 3D Eyewear.
„„ Only use the 3D Eyewear for its intended 3D content 
viewing purpose.
„„ Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in falling or other 
accidents that may cause injury.
„„Inspect the 3D Eyewear for damage before each use.
Viewing of 3D Images
„„In the event that you experience dizziness, nausea, or 
other discomfort while viewing 3D images, discontinue 
use and rest your eyes.
•  When you set the effect by using “3D adjustment”, take into account 
that the vision of 3D images varies among different individuals.
„„Do not use if the 3D Eyewear is cracked or broken.
„„ Content for 3D viewing includes commercially 
available Blu-ray discs, 3D broadcasts, etc..
„„ When preparing your own 3D content, ensure that it is 
properly produced. 
						

							ENGLISH
5
FCC STATEMENT
This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference 
by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Consult the Panasonic Service Center or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached 
installation instructions and use only shielded interface 
cable with ferrite core when connecting to computer or 
peripheral devices. Any changes or modifications not 
expressly approved by Panasonic Corp. of North America 
could void the user’s authority to operate this device.
FCC Declaration of ConformityModels:   TY-ER3D4MU/TY-ER3D4SU
Responsible Party:   Panasonic Corporation of North America 
One Panasonic Way, Secaucus, NJ  07094
Contact Source:   Panasonic Consumer Marketing Company of North 
America 
1-877-95-VIERA (958-4372)
email:   consumerproducts@panasonic.com
This device complies with Part 15 of the FCC Rules.  Operation is subject 
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
CANADIAN NOTICE:
For Model TY-ER3D4MU/TY-ER3D4SUThis Class B digital apparatus complies with Canadian ICES-003.
(continued overleaf) 
						

							ENGLISH
6
Using Precautions
Lens
 
 
Do not apply pressure to the liquid crystal shutter. Also, do 
not drop or bend the 3D Eyewear.
 
 
Do not scratch the surface of the liquid crystal shutter with 
a pointed instrument etc. Doing so may cause damage to 
the 3D Eyewear, and reduce the quality of the 3D image.
Cautions during viewing
 
 
Do not use devices that emit strong electromagnetic waves 
(such as cellular phones or personal transceivers) near 
the 3D Eyewear. Doing so may cause the 3D Eyewear to 
malfunction.
 
 
The 3D Eyewear cannot operate fully at high or low 
temperatures. Please use within the specified usage 
temperature range (
 page 15).
 
 
If the 3D Eyewear is used in a room in which fluorescent 
lights (50 Hz) are used, the light within the room may 
appear to be flickering. In this case, either darken or switch 
off the fluorescent lights when using the 3D Eyewear.
 
 
Wear the 3D Eyewear correctly. 3D images will not be 
correctly visible if the 3D Eyewear is worn upside down or 
back-to-front.
 
 
Other kinds of displays (such as computer screens, digital 
clocks, or calculators etc.) may be difficult to see while 
wearing the 3D Eyewear. Do not wear the 3D Eyewear 
when watching anything other than 3D images.
For comfortable viewing
 
 
View from at least the recommended distance (3 times the 
effective height of the screen), Recommended Distance: 
TC-P50ST50: 6.23’/1.9m 
TC-P65VT50: 7.87’/2.4m 
When the top and bottom area of the screen is blackened, 
such as movies, view the screen at a distance 3 times 
further than the height of the actual image. 
(That makes the viewing distance closer than above 
recommended distance.)
 
 
Stop using the 3D Eyewear immediately if your skin feels 
unusual. 
In rare cases, the paint or materials used in the 3D  Eyewear 
may cause an allergic reaction.
 
 
Stop using the 3D Eyewear immediately if you experience 
any redness, pain, or itching on the nose or temples. 
Prolonged use may cause such symptoms due to excess 
pressure, which may result in the user feeling unwell. 
						

							ENGLISH
7
 
 
Use in area of Bluetooth® signals from other devices may 
interfere with 3D Eyewear operation.
Using radio waves
This unit uses the 2.4 GHz radio frequency ISM band 
(Bluetooth®). However other wireless equipment may use the 
same frequency. Be sure to take note of the following to prevent 
radio wave interference from other equipment.
„„ Restriction of useFor use only in your country.
„„Range of useThe range of use is up to approximately 3.2 m (10.5 ft.). The range may 
be less depending on the structure of the building, the environment and 
any obstacles between the receiver and the transmitter. Such obstacles 
as reinforced concrete walls and metal doors, in particular, obstruct the 
transmitter’s signals.
„„Interference from other equipmentDue to radio interference, malfunctions may occur if the unit is placed 
too close to other equipment. We recommend keeping the unit as far 
away as possible from the following devices:
Bluetooth
® devices other than this unit, wireless LAN, microwaves, office 
automation devices, digital cordless telephones and other electronic 
devices.
The unit is designed to automatically avoid radio interference from these 
household devices. However malfunctions may happen when radio 
interference occurs.
IC STATEMENTThis  device  complies  with  Industry  Canada  licence-exempt  RSS 
standard(s).
Operation is subject to the following two conditions:
(1)  this  device  may  not  cause  interference,  and  (2)  this  device  must 
accept  any  interference,  including  interference  that  may  cause 
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry 
Canada (IC) radio frequency exposure limits.
Accessories
 Charging cable ···························································  (K2KYYYY00164)
 
 
< > indicates the quantity. 
						

							ENGLISH
8
Identifying Controls
 
 
Power switch
 
 
Indicator lamp
 
 
Charging port (DC IN)
 
 
Power switch
ON/OFF Slide the tab to the ON/OFF position to switch 
the power on/off.
MODE Slide the tab once to the MODE position to 
change the mode between 3D and 2D.
•  2D: View a 3D image in 2D.This is also used when registering the 3D 
Eyewear on the television. For details on 
registration, refer to the Registration page. 
(
 page 10)
 
 
Indicator lamp
Lights or fl ashes during use or charging to show the status of 
the rechargeable battery and registration.
 
 
Charging port
Connect the charging cable.
•  Charge by connecting the included charging cable. 
						

							ENGLISH
9
„„Indicator lamp status
Indicator lamp
Status 
Lights red for 2 seconds when 
turned on Suffi cient battery level
Flashes red 5 times when 
turned on Low battery level
Flashes red and green 
alternately Under registration
Flashes green once every 2 
seconds Under reconnecting to the TV
Lights green for 3 seconds Registration or reconnecting  is successfully completed.
Flashes red 3 times Automatically power off
(Registration or reconnecting 
fails or connection is lost)
Flashes red once every 2 
seconds when in use 3D mode is selected
Flashes red twice every 4 
seconds when in use 2D mode is selected
 Charging
„„
Charging the 3D Eyewear
Connect the 3D Eyewear with the included charging cable to 
the television, then switch on the television.
•  When the indicator lamp turns off, charging is complete. Refer 
to the specifi cations on page 15 for the approximate charging 
time.
NOTE
•  Charge the 3D Eyewear before using the fi rst time after purchase or after long periods of disuse.
•  Be sure to turn the television power on when charging. The battery will  not be charged when the television power is off.
USB connector
Micro USB connector 
						

							ENGLISH
10
Registration
„„First RegistrationPerform the First Registration when the 3D Eyewear is used 
for the first time.
1.  Turn on the TV to see and select the 3D mode. 
2.  Slide the tab from the OFF position to the ON position.  The 3D Eyewear will power on and start registration. 
Place the 3D Eyewear within 1.6 feet (50 cm) from the TV 
while the registration is in progress. 
3.  The green LED lights on the 3D Eyewear for 3 seconds when  the registration is successfully completed. 
After first registration, the 3D Eyewear will reconnect with the TV 
automatically when 3D Eyewear is powered on near the TV in 
3D mode.
„„ Registration AgainWhen connection with registered TV fails, or when using with 
another TV, re-register the 3D Eyewear.
1.  Turn on the TV to see. 
2.  Within 1.6 feet (50 cm) from the TV, hold the tab on the  MODE position for more than 2 seconds. 
The registration will start. 
3.  The green LED lights for 3 seconds when the registration is  successfully completed.
*  If the registration failed, the 3D Eyewear will power off.  In this case, power off the TV and perform from step 1.
* Do not connect the charging cable while Registration Again.
* Release the tab when Registration Again starts.