Home > Palm > PDAs > Palm Tungsten W PDA Phone Instructions

Palm Tungsten W PDA Phone Instructions

Here you can view all the pages of manual Palm Tungsten W PDA Phone Instructions. The Palm manuals for PDAs are available online for free. You can easily download all the documents as PDF.

Page 351

Mobile preferences
337
The added networks appear at the bottom of your Preferred Networks list, 
where you can sort them.
Setting PIN for mobile power on
When the Security setting is enabled, the mobile requires the user to enter a valid 
PIN code each time the mobile radio is powered on. The mobile is locked until a 
valid PIN code is entered. Modification of this setting is PIN code protected. You 
are prompted to enter a valid PIN code when a change to this setting is saved.
IMPORTANTIf you enter the...

Page 352

Chapter 21 Setting Preferences for Your Handheld
338
3.Enter a PIN number using the keypad and press Function   + Enter , or 
tap OK.
The minimum length is four characters, and the maximum length is eight 
characters.
4.Press Function   + Enter , or tap OK.
To change your PIN number:
1.Tap Change PIN. 
2.Enter your current PIN number.
3.Press Function   + Enter , or tap Done.
4.Enter a new PIN.
Enter PIN number
Tap Change PIN
Enter PIN number 

Page 353

Mobile preferences
339
5.Press Function   + Enter , or tap OK.
6.Enter your new PIN number again to verify.
7.Press Function   + Enter , or tap OK.
Unlocking your SIM card
If you enter the current PIN incorrectly three times, the SIM card is locked. A SIM 
locked alert displays. You must enter an eight-digit PIN Unlock Key (PUK) to 
unlock your SIM. The PUK is provided by your wireless service provider. To find 
your PUK, check the documentation that came with your wireless service or 
contact your...

Page 354

Chapter 21 Setting Preferences for Your Handheld
340
3.Enter a new PIN.
4.Press Function   + Enter , or tap OK.
5.Enter the new PIN again to verify.
6.Press Function   + Enter , or tap OK.
Setting call barring
Call barring is a supplementary service that allows you to bar or block different 
classes of incoming and outgoing calls ranging from All calls to No barring. The 
call barring settings are protected by the barring password. The barring password 
is managed by and originally obtained from the...

Page 355

Mobile preferences
341
3.Tap Edit Settings.
4.Enter a call barring four-digit password using the keypad.
5.Press Function   + Enter , or tap OK.
6.Tap the Incoming Calls or Outgoing Calls pick list to change settings.
7.Press Function   + Enter , or tap OK.
Tap Edit Settings
Enter password 

Page 356

Chapter 21 Setting Preferences for Your Handheld
342
To change the call barring password:
1.Tap Change Password.
2.Enter a new four-digit password.
3.Press Function   + Enter , or tap OK.
4.Enter the new password again to verify.
5.Press Function   + Enter , or tap OK.
Setting Fixed Number Dialing (FND)
Fixed Number Dialing (FND) restricts the handheld so that only preprogrammed 
phone numbers in the FND phone book can be dialed. 
There are two modes to the FND screen: view and edit. When the user taps...

Page 357

Mobile preferences
343
When FND is enabled:
nDialing is estricted to numbers contained in the FND phone book, except for 
emergency calls.
nYou can extend an FND entry by adding digits to the dial string. This makes it 
possible to restrict dialing to a specific country or area code.
To view or dial an FND entry:
1.Select Security.
2.Select the Fixed dialing box. 
3.Select an entry and tap Dial.
You go to the Palm
TM Mobile main screen and the number is dialed.
Ta p  S e c u r i t y
Tap box
Select an...

Page 358

Chapter 21 Setting Preferences for Your Handheld
344
To add or edit an FND entry:
1.Select Edit.
2.Enter your PIN2 number.
3.Press Function   + Enter , or tap Done.
4.Tap New, or select an entry and tap Edit.
5.Edit or add the entry.
6.Press Function   + Enter , or tap OK.
Tap Edit
Enter PIN2 number
Ta p  O K
Select an entry to edit
Tap New or Edit 

Page 359

Mobile preferences
345
You can delete the entry by tapping Delete, or access your Address Book by 
tapping Lookup.
To change the PIN2 number:
1.Select Edit.
2.Enter your PIN2 number.
3.Press Function   + Enter , or tap OK.
4.Tap PIN2.
5.Enter the new PIN2 number.
Tap Edit
Enter PIN2 number
Ta p  O K
Ta p  P I N 2 

Page 360

Chapter 21 Setting Preferences for Your Handheld
346
6.Press Function   + Enter   or tap OK.
The number must be between four and eight digits.
7.Enter the new PIN2 number again to verify.
8.Press Function   + Enter , or tap OK.
Network preferences
Your handheld supports GPRS data connections and acts as a fully functional data 
modem for circuit-switched connections over GSM. 
Modem Accessory and TCP/IP software
Although your handheld is wirelessly enabled, you can also use TCP/IP software 
that is...
Start reading Palm Tungsten W PDA Phone Instructions

Related Manuals for Palm Tungsten W PDA Phone Instructions

All Palm manuals