Optoma W401 Projector User Manual

51English
User Controls
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
IP Address
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to 
exit.
Step 3: To open Network Connections, 
click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks  , click...

52English
User Controls
SETUP | Network  
| Control Settings
Creston
Use this function to select the network function. For more informa-
tion, please visit http://www.crestron.com &  
www.crestron.com/getroomview.
Extron
Use this function to select the network function.
PJ Link
Use this function to select the network function.
AMX Device Discovery
Use this function to select the network function.
Telnet
Use this function to select the network function.
HTTP
Use this function to select the network...

53English
User Controls
Input Source
Use this option to enable / disable input sources. Press ► to enter 
the sub menu and select which sources you require. Press “Enter” 
to finalize the selection. The projector will only search for inputs 
that are enabled.
Source Lock
On:  `The projector will only search current input connection.
Off: The projector will search for other signals if the current  `
input signal is lost. 
High Altitude
When “On” is selected, the fans will spin faster. This feature is...

54English
User Controls
IR Function
On: Choose “On”, the projector can be operated by the remote  `
control.
Front: Choose “Front”, the projector can be operated by the  `
remote control from front IR receiver.
Top: Choose “Top”, the projector can be operated by the re- `
mote control from top IR receiver.
Off: Choose “Off”, you will only be able to use the control panel  `
keys.
Background Color
Use this feature to display a “Black”, “Red”, “Blue”, “Green” or 
“White”, screen when no signal is...

55English
User Controls
OPTIONS |  
Lamp Settings
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed.  
The message will appear 30 hours before suggested replacement 
of lamp.
Lamp Mode
Bright:  `Choose “Bright” to increase the brightness. 
Eco.:  `Choose “Eco.” to dim the projector lamp which will lower 
power consumption and extend the lamp life. 
Eco+: When Eco+ mode is activated, the brightness...

56English
User Controls
OPTIONS | 
Advanced
Direct Power On
Choose “On” to activate Direct Power mode. The projector will 
automatically power on when AC power is supplied, without 
pressing the “” key on the projector control panel or on the 
remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, 
when there is no signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in 
minutes).
Sleep Timer...

57English
Appendices
OPTIONS |  
Filter Settings
Filter Usage Hours
Display the filter time.
Optional Filter Installed
Select “Yes” to display warning message after 500 hours of use. 
Select “No” to turn off warning message.
Filter Reminder
Choose this function to show or hide the warning massage when 
the changing filter message is displayed. (Factory default setting: 
500 hours)
Filter Reset
Reset the dust filter counter after replacing or cleaning  the dust 
filter.
Filter Usage Hours
Optional Filter...

58English
Appendices
Troubleshooting
If you experience a problem with your projector, please refer to 
the following information. If a problem persists, please contact 
your local reseller or service center.
Image Problems
 No image appears on-screen
Ensure all the cables and power connections are correctly and  `
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken. `
Check if the projection lamp has been securely installed.  `
Please...

59English
Appendices
If you are using a Notebook: `
First, follow the steps above to adjust resolution of the  1. 
computer.
Press the appropriate keys listed below for your notebook 2. 
manufacturer to send signal out from notebook to projector. 
Example: [Fn]+[F4]
Acer   
[Fn]+[F5]
Asus    [Fn]+[F8]
Dell    [Fn]+[F8]
Gateway   
[Fn]+[F4]
Mac Apple: 
System Preference  Display  Arrangement   Mirror 
displayIBM/Lenovo   [Fn]+[F7]
HP/Compaq   [Fn]+[F4]
NEC     [Fn]+[F3]
Toshiba      [Fn]+[F5]...

60English
Appendices
 The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector  `
will show the best image in 16: 9 format on projector side.
If you play the LBX format DVD title, please change the format  `
as LBX in projector OSD.
If you play 4:3 format DVD title, please change the format as  `
4:3 in projector OSD.
If the image is still stretched, you will also need to adjust the  `
aspect ratio by referring to the following:
Please setup the...