Optoma W401 Projector User Manual

11English
Installation
The remote is  ™subject to model’s specifications.
Menu
LED Indicator1. 
Power On/Off2. 
Source3. 
Mouse Left Click4. 
Enter5. 
 
Four Directional Select 6. 
Keys / Mouse control 
 
Switch (turn on/off 7. 
mouse function)
Re-Sync8. 
Mouse Right Click9. 
Laser Pointer10. 
Page Up11. 
Volume +/-12. 
Menu13. 
Zoom14. 
AV mute15. 
Video 16. 
3D17. 
VGA18. 
Page Down19. 
Keystone +/-20. 
Brightness21. 
HDMI22. 
S-Video23. 
Eco+24. 
 
Numbered keypad 25. 
(for password input)...

12English
Installation
VGA2-IN / YPbPr
VGA-OUTVIDEOAUDIO-OUT
(VGA
 1)
AUDIO1-IN
RS-232C
USB
(VGA 2)
AUDIO2-INHDMI
RJ-45(VIDEO)
AUDIO3-IN
VGA1-IN / YPbPr /3D SYNC OUT(5V)
12V OUT
E62405SP
R
m o l ex
MOLEX
Connect to Computer/Notebook
Connecting the Projector
1
2
35
1....................................................................................................Power Cord2..............................................................................................*Network...

13English
Installation
VGA2-IN / YPbPr
VGA-OUTVIDEOAUDIO-OUT
(VGA
 1)
AUDIO1-IN
RS-232C
USB
(VGA 2)
AUDIO2-INHDMI
RJ-45(VIDEO)
AUDIO3-IN
VGA1-IN / YPbPr /3D SYNC OUT(5V)
12V OUT
E62405SP
R
Connect to Video Sources
1....................................................................................................Power Cord2..................................................................................................*HDMI...

14English
Installation
Connect to 3D Video Devices
The 3D video  ™source device must be powered on before the 3D projector.
If input video is  ™normal 2D, please press “3D Format” and switch to “Auto”.If “SBS Mode” is  ™active, 2D video content will not display correctly.
NOTE
NOTEOnce you have connected your devices together with HDMI 
cables, as shown in the diagram, you are ready to begin. 
Power ON your 3D video source and your 3D projector.
PlayStation® 3 GamesMake sure that you have...

15English
Installation
3D Broadcast3D Blu-ray™ Disc3D Console Games
SKY+HD, cable/satellite box3D Blu-ray™ Player
PlayStation® 3
3D Glasses
Full 3D DLP® Projector
POWERSOU RCE   

16English
Installation
To turn ON 3D glasses: Press the “Power” button and the LED will flash 1. one time indicating the glasses are ready to use 3D mode.Verify that 3D content is being sent to the projector and signal is compat-2. ible with projector specifications.Turn on the “3D Mode” (DLP-Link/VESA 3D - depending on which type 3. of glasses you are using) of the 3D projector. The option is located in the “Display” section of the projector OSD menu.Turn on 3D glasses and verify image appears in 3D...

17English
Installation
POWER
SOURCE
Powering On/Off the Projector
Turn on the projec- ™tor first and then select the signal sources.
Powering On the Projector
1. Remove the lens cap. 
2. Securely connect the power cord and signal cable. When 
connected, the ON/STANDBY LED will turn Amber. 
3. Turn on the lamp by pressing “” button either on the top of 
the projector or on the remote. The ON/STANDBY LED will 
now turn Green. 
 The startup screen will display in approximately 10 seconds. 
The first...

18English
Installation
Powering Off the Projector
1.  Press the “” button on the remote control or 
on the control panel to turn off the projector. 
The following message will be displayed on the screen. 
Power Off?
Press Power key again
   Press the “” button again to confirm otherwise the 
message will disappear after 15 seconds. When you 
press the “” button for the second time, the projector will 
display countdown timer and will shut down.
2. The cooling fans continue to operate for about 10 seconds...

19English
Installation
Contact the nearest  ™service center if the projector displays these symptoms. See pages 75-76 for more information.
Warning Indicator
When the warning indicators (see below) come on, 
the projector will automatically shutdown: 
™ “LAMP” LED indicator is lit red and if “On/Standby” indicator 
flashes amber.
™ “TEMP” LED indicator is lit red and if “On/Standby” 
indicator flashes amber. This indicates the projector has 
overheated. Under normal conditions, the...

20English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height 
The projector is equipped with elevator feet for adjusting 
the image height.
1. Locate the adjustable foot you wish to modify on the 
underside of the projector. 
2. Rotate the adjustable ring clockwise to raise the projector 
or counter clockwise to lower it. Repeat with the remaining 
feet as needed. 
Tilt-Adjustment Feet
Tilt-Adjustment Ring