Optoma W401 Projector User Manual

1English
Table of Contents ............................1
Usage Notice ...................................2
Safety Information ...............................2
Precautions  .........................................3
Eye Safety Warnings  ..........................6
Product Features ................................6
Introduction ......................................7
Package Overview  ..............................7
Product Overview  ...............................8
Main Unit...

2English
Usage Notice
The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous \
volt-age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servic-ing) instructions in the literature accompanying the appliance.
WARNING:...

3English
Usage Notice
Please follow all warnings, precautions and mainte-
nance as recommended in this user’s guide.
When the lamp  ™reaches the end of its life, the pro-jector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the proce-dures listed under “Replacing the Lamp” section.
▀■ Warning-Do not look into the projector’s lens when the 
lamp is on. The bright light may hurt your eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do 
not...

4English
Usage Notice
Do:
Turn off and unplug the power plug from the AC outlet before  ™
cleaning the product.
Use a soft dry cloth with mild detergent to clean the display hous- ™
ing.
Disconnect the power plug from AC outlet if the product is not be- ™
ing used for a long period of time.
Do not:
Block the slots and openings on the unit provided for ventilation. ™
Use abrasive cleaners, waxes or solvents to clean the unit. ™
Use under the following conditions: ™
In...

5English
Usage Notice
tions, those who are sleep deprived or under the influence of 
alcohol should avoid utilizing the unit’s 3D functionality.
If you experience any of the following symptoms, stop viewing 3D  ™
pictures immediately and consult a medical specialist: (1) altered 
vision; (2) light-headedness; (3) dizziness; (4) involuntary move-
ments such as eye or muscle twitching; (5) confusion; (6) nausea; 
(7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10) 
disorientation....

6English
Usage Notice
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to re-
duce ambient light levels.
Eye Safety Warnings
Product Features
▀■ XGA (1024x768) / WXGA (1280x800) Native resolution
▀■ HD compatible – 720p and 1080p supported 
▀■...

7English
Introduction
Documentation : 
	User’s Manual
	Warranty Card
	Quick Start Card
	WEEE Card   (for EMEA only)
Due to different  ™applications in each Country, some regions may have different accessories.
Power Cord
IR Remote Control(Remote may vary de-pending on model)
2 × AAA Batteries
Projector with lens cap 
POWERSOURCE
Unpack and inspect the box contents to ensure all parts listed 
below are in the box. If something is missing, please contact 
Optoma customer service.
Package Overview...

8English
Introduction
Product Overview
Ventilation (outlet)1. 
Ventilation (inlet)2. 
Focus Ring3. 
Zoom Ring4. 
IR Receivers5. 
Control Panel6. 
Lens7. 
Tilt-Adjustment Feet8. 
Security Bar9. 
Input / Output 10. 
Connections
Power Socket11. 
?POWER
VGA2-IN / YPbPrVGA-OUTVIDEO
AUDIO-OUT
(VGA
 1)
AUDIO1-IN
RS-232C
USB
(VGA 2)
AUDIO2-IN
HDMI
RJ-45(VIDEO)
AUDIO3-IN
VGA1-IN / YPbPr /3D SYNC OUT(5V)
12V OUT
9108
POWER
SOURCE
857
65
11
Main Unit
The interface is  ™subject to model’s specifications.Do not...

9English
Introduction
POWER?
8
62453
711109
112
Help1. 
Menu2. 
Source3. 
Enter4. 
Re-Sync5. 
Power6. 
Keystone Correction7. 
Four Directional Select Keys8. 
On/Standby LED 9. 
Lamp LED 10. 
Temp LED11. 
IR Receiver12. 
Control Panel 

10English
Introduction
VGA2-IN / YPbPr
VGA-OUTVIDEOAUDIO-OUT
(VGA
 1)
AUDIO1-IN
RS-232C
USB
(VGA 2)
AUDIO2-INHDMI
RJ-45(VIDEO)
AUDIO3-IN
VGA1-IN / YPbPr /3D SYNC OUT(5V)
12V OUT
Input/Output Connections
RJ451. 
USB Connector (Connect to PC for Remote Mouse func-2. 
tion/USB Service for firmware upgrade)
HDMI Connector (v1.4a 3D supported)3. 
 
VGA1-IN/YPbPr/4.   Connector  
(PC Analog Signal/Component Video Input/HDTV/YPbPr/
Wireless function via VGA Dongle) 
VGA-Out Connector (Monitor Loop-through...