Optoma W401 Projector User Manual

							1English
Table of Contents ............................1
Usage Notice ...................................2
Safety Information ...............................2
Precautions  .........................................3
Eye Safety Warnings  ..........................6
Product Features ................................6
Introduction ......................................7
Package Overview  ..............................7
Product Overview  ...............................8
Main Unit ..............................................8
Control Panel  .......................................9
Input/Output Connections ..................10
Remote Control ..................................11
Installation  .....................................12
Connecting the Projector ..................12
Connect to Computer/Notebook ........12
Connect to Video Sources .................13
Connect to 3D Video Devices ...........14
Using the 3D glasses ........................16
Powering On/Off the Projector ..........17
Powering On the Projector .................17
Powering Off the Projector  .................18
Warning Indicator  ...............................19
Adjusting the Projected Image  ..........20
Adjusting the Projector’s Height ........20
Adjusting the Projector’s Zoom /  Focus  .................................................21
Adjusting Projection Image Size ........21
User Controls  ................................23
Control Panel & Remote Control ......23
Control Panel .....................................23
On-screen Display Menus  ................29
How to operate ..................................29
Menu Tree ..........................................30
IMAGE  ...............................................32
IMAGE | Advanced  ............................34
IMAGE | Advanced  | Signal  ..............36
DISPLAY ............................................37
DISPLAY | 3D   ...................................42
SETUP ...............................................43
SETUP | Audio Settings .....................45
SETUP | Security  ...............................46
SETUP | Advanced  ............................47
SETUP | Network  ..............................48
SETUP | Network | LAN Settings  .......49
SETUP | Network  | Control Settings .52
OPTIONS ...........................................53
OPTIONS | Lamp Settings  .................55
OPTIONS | Advanced  ........................56
OPTIONS | Filter Settings ..................57
Appendices  ....................................58
Troubleshooting  ................................58
Image Problems .................................58
Other Problems  ..................................61
Remote Control Problems  .................61
LED Lighting Messages .....................62
On Screen Messages  ........................63
Replacing the Lamp ..........................65
Compatibility Modes  .........................67
RS232 Commands and Protocol  Function List .....................................69
RS232 Pin Assignments ....................69
RS232 Protocol Function List  ............70
Ceiling Mount Installation ..................74
Optoma Global Offices  .....................75
Regulation & Safety Notices .............77
FCC Notice  ........................................77
Declaration of Conformity for EU  countries ............................................78
Trademarks .......................................79
Table of Contents 
						

							2English
Usage Notice
The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous \
volt-age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servic-ing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation.  As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that \
restricts air flow.2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture.3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.4. Clean only with dry cloth.5. Only use attachments/accessories specified by the manufacturer. 6. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):Unit has been dropped. -Power supply cord or plug has been damaged. -Liquid has been spilled on to the projector. -Projector has been exposed to rain or moisture. -Something has fallen in the projector or something is loose inside. -Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair.7. Do not let objects or liquids enter the projector. They may touch danger-ous voltage points and short out parts that could result in fire or electric shock.8. See projector enclosure for safety related markings.9. The unit should only be repaired by appropriate service personnel.
Safety Information 
						

							3English
Usage Notice
Please follow all warnings, precautions and mainte-
nance as recommended in this user’s guide.
When the lamp  ™reaches the end of its life, the pro-jector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the proce-dures listed under “Replacing the Lamp” section.
▀■ Warning-Do not look into the projector’s lens when the 
lamp is on. The bright light may hurt your eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do 
not expose this projector to rain or moisture.
▀■ Warning-Please do not open or disassemble the projec-
tor as this may cause electric shock.
▀■ Warning-When replacing the lamp, please allow the unit 
to cool down.
▀■ Warning-This projector will detect the life of the lamp 
itself.  Please be sure to change the lamp when 
it shows warning messages.
▀■ Warning-Reset the “Lamp Reset” function from the 
on-screen display “OPTIONS | Lamp Settings” 
menu after replacing the lamp module.
▀■ Warning-When switching the projector off, please ensure 
the cooling cycle has been completed before 
disconnecting power. Allow 90 seconds for the 
projector to cool down.
▀■ Warning-Do not use lens cap when projector is in opera-
tion.
▀■ Warning-When the lamp is approaching to the end of 
its life time, the message “Replacement sug-
gested” will show on the screen. Please contact 
your local reseller or service center to change 
the lamp as soon as possible.
▀■ Warning-Do not look into or point the laser pointer on 
your remote control into your or someone’s 
eyes. Laser pointer can cause permanent dam-
age to eyesight.
NOTE
Precautions  
						

							4English
Usage Notice
Do:
Turn off and unplug the power plug from the AC outlet before  ™
cleaning the product.
Use a soft dry cloth with mild detergent to clean the display hous- ™
ing.
Disconnect the power plug from AC outlet if the product is not be- ™
ing used for a long period of time.
Do not:
Block the slots and openings on the unit provided for ventilation. ™
Use abrasive cleaners, waxes or solvents to clean the unit. ™
Use under the following conditions: ™
In extremely hot, cold or humid environments. -
Ensure that the ambient room temperature is within 5°C ~  `
40°C
Relative humidity is 10% ~ 85% `
In areas susceptible to excessive dust and dirt. -
Near any appliance generating a strong magnetic field. -
In direct sunlight. -
Viewing 3D projection using the 3D function
IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING WARN-INGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION.
Warning
Children and teenagers may be more susceptible to health issues  ™
associated with viewing in 3D and should be closely supervised 
when viewing these images.
Photosensitive Seizure Warning and Other Health Risks
Some viewers may experience an epileptic seizure or stroke when  ™
exposed to certain flashing images or lights contained in certain 
Projector pictures or video games. If you suffer from, or have a 
family history of epilepsy or strokes, please consult with a medical 
specialist before using the 3D function.
Even those without a personal or family history of epilepsy or  ™
stroke may have an undiagnosed condition that can cause photo-
sensitive epileptic seizures.
Pregnant women, the elderly, sufferers of serious medical condi- ™ 
						

							5English
Usage Notice
tions, those who are sleep deprived or under the influence of 
alcohol should avoid utilizing the unit’s 3D functionality.
If you experience any of the following symptoms, stop viewing 3D  ™
pictures immediately and consult a medical specialist: (1) altered 
vision; (2) light-headedness; (3) dizziness; (4) involuntary move-
ments such as eye or muscle twitching; (5) confusion; (6) nausea; 
(7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10) 
disorientation. Children and teenagers may be more likely than 
adults to experience these symptoms. Parents should monitor 
their children and ask whether they are experiencing these symp-
toms.
Watching 3D projection may also cause motion sickness, percep- ™
tual after effects, disorientation, eye strain and decreased postural 
stability. It is recommended that users take frequent breaks to 
lessen the potential of these effects. If your eyes show signs of 
fatigue or dryness or if you have any of the above symptoms, im-
mediately discontinue use of this device and do not resume using 
it for at least thirty minutes after the symptoms have subsided.
Watching 3D projection while sitting too close to the screen for  ™
an extended period of time may damage your eyesight. The 
ideal viewing distance should be at least three times the screen 
height. It is recommended that the viewer’s eyes are level with the 
screen.
Watching 3D projection while wearing 3D glasses for an extended  ™
period of time may cause a headache or fatigue. If you experience 
a headache, fatigue or dizziness, stop viewing the 3D projection 
and rest.
Do not use the 3D glasses for any other purpose than for watch- ™
ing 3D projection. Wearing the 3D glasses for any other purpose 
(as general spectacles, sunglasses, protective goggles, etc.) may 
be physically harmful to you and may weaken your eyesight.
Viewing in 3D projection may cause disorientation for some view- ™
ers. Accordingly, DO NOT place your 3D PROJECTOR near open 
stairwells, cables, balconies, or other objects that can be tripped 
over, run into, knocked down, broken or fallen over. 
						

							6English
Usage Notice
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to re-
duce ambient light levels.
Eye Safety Warnings
Product Features
▀■ XGA (1024x768) / WXGA (1280x800) Native resolution
▀■ HD compatible – 720p and 1080p supported 
▀■ BrilliantColorTM Technology 
▀■ Security Bar and Kensington Lock
▀■ RS232 control 
▀■ Rapid shutdown
▀■ Built-in speakers
▀■ Network support
▀■ Full 3D
▀■ Eco+ and Quick Resume 
						

							7English
Introduction
Documentation : 
	User’s Manual
	Warranty Card
	Quick Start Card
	WEEE Card   (for EMEA only)
Due to different  ™applications in each Country, some regions may have different accessories.
Power Cord
IR Remote Control(Remote may vary de-pending on model)
2 × AAA Batteries
Projector with lens cap 
POWERSOURCE
Unpack and inspect the box contents to ensure all parts listed 
below are in the box. If something is missing, please contact 
Optoma customer service.
Package Overview
Carrying Case
Menu    
						

							8English
Introduction
Product Overview
Ventilation (outlet)1. 
Ventilation (inlet)2. 
Focus Ring3. 
Zoom Ring4. 
IR Receivers5. 
Control Panel6. 
Lens7. 
Tilt-Adjustment Feet8. 
Security Bar9. 
Input / Output 10. 
Connections
Power Socket11. 
?POWER
VGA2-IN / YPbPrVGA-OUTVIDEO
AUDIO-OUT
(VGA
 1)
AUDIO1-IN
RS-232C
USB
(VGA 2)
AUDIO2-IN
HDMI
RJ-45(VIDEO)
AUDIO3-IN
VGA1-IN / YPbPr /3D SYNC OUT(5V)
12V OUT
9108
POWER
SOURCE
857
65
11
Main Unit
The interface is  ™subject to model’s specifications.Do not block  ™projector in/out air vents.
242113   
						

							9English
Introduction
POWER?
8
62453
711109
112
Help1. 
Menu2. 
Source3. 
Enter4. 
Re-Sync5. 
Power6. 
Keystone Correction7. 
Four Directional Select Keys8. 
On/Standby LED 9. 
Lamp LED 10. 
Temp LED11. 
IR Receiver12. 
Control Panel 
						

							10English
Introduction
VGA2-IN / YPbPr
VGA-OUTVIDEOAUDIO-OUT
(VGA
 1)
AUDIO1-IN
RS-232C
USB
(VGA 2)
AUDIO2-INHDMI
RJ-45(VIDEO)
AUDIO3-IN
VGA1-IN / YPbPr /3D SYNC OUT(5V)
12V OUT
Input/Output Connections
RJ451. 
USB Connector (Connect to PC for Remote Mouse func-2. 
tion/USB Service for firmware upgrade)
HDMI Connector (v1.4a 3D supported)3. 
 
VGA1-IN/YPbPr/4.   Connector  
(PC Analog Signal/Component Video Input/HDTV/YPbPr/
Wireless function via VGA Dongle) 
VGA-Out Connector (Monitor Loop-through Output)5. 
Composite Video Input Connector6. 
3D Sync Out (5V)7. 
Audio Output Connector (3.5mm Mini Jack)8. 
12V Trigger Relay (12V, 250mA)9. 
Power Socket10. 
 
VGA2-IN/YPbPr  Connector  11. 
(PC Analog Signal/Component Video Input/HDTV/YPbPr) 
RS-232 Connector (9-pin)12. 
Audio3 Input for Video (3.5mm mini jack)13. 
Audio2 Input for VGA2 (3.5mm mini jack)14. 
Kensington15. TM Lock Port
Security Bar16. 
Audio1 Input for VGA1 (3.5mm mini jack) 17. 
9764
11151610
1
1213
5823
Monitor loop  ™through only sup-port in VGA1-IN/YPbPr.The interface is  ™subject to model’s specifications.VGA dongle is a  ™optional accesso-ry. Please contact  
Optoma service for details.
1417