OKI C9850hdn User Manual

							C9850 User’s Guide> 61
SEPARATING QUEUED PRINT JOBS
When you share a printer with other users it can be useful to print a 
special page between print jobs to help locate each user’s job in a 
paper stack at the printer. 
The separator page is set from the printer driver’s default properties 
window. Access to this is directly from Windows, not from within 
your application program. See “Changing the driver defaults” on 
page 43.
1.In the driver’s Advanced tab click the [Separator Page…] 
button.
2.Click [Browse...] and navigate to a file containing an image of 
the separator page you wish to use, then click [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 62
COVER PRINT
Cover print is when the first page (cover) of a print job is fed from 
one paper tray, and the remaining pages of the print job are fed from 
another paper tray.
HOW TO USE COVER PRINT
1.On the [Setup] tab, click [Paper Feed Options...].
2.Under [Cover Printing], select [Use different source for first 
page].
3.Choose the tray you want to feed the cover page from and 
the paper type in the [Source] and [Weight] drop-down lists.
4.Click [OK] to close the Paper feed options window.
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 63
CUSTOM PAGE SIZE
This feature enables printing on non-standard sized print media. 
The multipurpose tray is used for feeding non-standard media sizes. 
Print media width can be from approximately 51mm to 328mm, and 
its length can be from 128mm to 1200mm. Actual limits vary slightly 
depending on which printer driver you use and your computer’s 
operating system.
Some software applications may not produce the desired results 
with non-standard print media sizes, and some experimentation 
may be required to obtain the results you want.
Notes
If you are using heavy media, transparencies, envelopes or labels, 
use the face up (straight through) paper feed path. 
For face up printing (straight-through path), make sure the rear exit 
is open and the paper support is extended. 
> Paper is stacked in reverse order.
> Tray capacity is about 100 sheets. (Actual capacity depends on 
paper weight.)
HOW TO CREATE, EDIT, AND DELETE A CUSTOM PAGE SIZE
1.On the driver’s [Setup] tab, click the [Paper Feed Options...] 
button.
2.In the Paper Feed Options window, click [Custom Size...].
If you have previously saved any custom sizes they will be 
listed in the Custom Size window.
3. To create a new custom size:
a. Enter the desired dimensions in the Width and Length 
boxes.
b. Enter a name for the new size in the Name box, and click 
[Add>>] to save it in the list.
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 64
To edit a previously saved custom size: 
a. Click its name in the list and edit its dimensions and/or 
name.
b. Click [Modify].
To delete a previously saved custom size: 
a. Click its name in the list.
b. Click [Delete].
4.Click [OK] to accept your changes and close the Custom Size 
window.
SELECTING A CUSTOM PAGE SIZE
Once you have created a custom page size using the previous 
procedure:
1.On the driver’s [Setup] tab open the [Size] drop-down list.
2.Select your defined custom page.
If this is the size of your document but you want to scale it to fit a 
standard size of paper:
1.On the driver’s [Setup] tab, click [Paper Feed Options...].
2.Click [Resize document to fit printer page] and choose the 
printer’s actual paper size from the [Conversion] drop-down 
list.
It is also possible to select the page size within your software 
application. See the documentation supplied with your software 
application for more information.
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 65
DUPLEX (DOUBLE-SIDED) PRINTING
If your printer has a duplex unit installed you can print on both sides 
of the paper, to save paper, weight, bulk and cost.
> Only paper can be used for duplex printing, not 
transparencies or other media.
> Use paper stock of 75–120  g/m². If you experience excessive 
curling with 75–90 g/m² paper, use 105 g/m².
> Use standard sized paper stock only, e.g. A4, A3, Letter, etc.
> Load the paper print side up. Ream wrappers are usually 
marked with an arrow, indicating which is the print side.
> Paper can be fed from standard paper trays, including the 
high capacity feeder if you have one, but not from the 
multipurpose tray.
> Do not set the paper weight to Ultra Heavy.
> Do not enable the White Page Skip function.
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 66
ACTIVATING DUPLEX PRINTING
1.On the driver’s [Setup] tab, under [2-Sided Printing], select 
the binding edge you want.
For portrait (tall) page layout the usual choice is [Long Edge]. 
For landscape (wide) page layout the usual choice is [Short 
Edge].
Choosing [None] turns off duplex printing and your document 
will be printed single-sided.
If you have a duplex unit installed, but do not have the [2-sided 
printing] option on the [Setup] tab, check that the Duplex option is 
enabled in the driver. (See “Setting the driver device options” on 
page 46.)
WINDOWS XPWINDOWS 98
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 67
PRINTING MULTIPLE PAGES ON ONE SHEET (N-UP)
This feature scales the page size of your document for printing and 
reproduces several pages per sheet.
This is useful when you simply want to proof your page layout, or 
distribute your document in a more compact format. It saves paper, 
bulk, weight and cost.
If you have a duplex unit installed, you can even combine this 
feature with duplex printing to save even more.
4321
12
34
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 68
HOW TO PRINT MULTIPLE PAGES ON ONE SHEET
1.In the driver’s [Setup] tab, choose the number of pages you 
want to print on each sheet from the [Finishing Mode] drop-
down list. [Standard] is normal, and [8-up] (PCL-6) and [16-
up] (PCL) is maximum.
2.Click [Options...] to choose from the available options for this 
feature.
From here you can choose the page printing order, the page 
layout, whether you want printed page borders, and a binding 
margin if you need it.
3.Click [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 69
POSTER PRINTING
Note
Poster printing is not available with the PCL 6 driver.
This option allows you to print posters by dividing a single document 
page into multiple pieces (sometimes called “tiles”). Each piece 
prints, enlarged, on a separate sheet. Then, you combine the 
separate sheets to create a poster.
PRINTING POSTERS
1.In the driver’s [Setup] tab, under [Finishing Mode] choose 
[Poster Print].
2.Click [Options...] to open the Poster Print window.
a. Choose the [enlargement] required for your document to 
fill the poster.
Downloaded From ManualsPrinter.com Manuals 
						

							C9850 User’s Guide> 70
b. [Registration marks] can be printed if required so that 
your printed pages (tiles) can be trimmed exactly to the 
edge of the image.
c. An [overlap] may help you to match adjacent tiles when 
making up your final poster.
3.Click [OK] to close the Paper Feed Options window.
Downloaded From ManualsPrinter.com Manuals