OKI C9850hdn User Manual
Have a look at the manual OKI C9850hdn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
C9850 User’s Guide> 141 Traym Config, where m is in range 1 to 5 (similar arrangement for all trays) Media Weight Auto Light Medium Light Medium Medium Heavy Heavy Ultra Heavy 1 Ultra Heavy 2 Ultra Heavy 3 Sets media weight for Tr a y m . A3 Nobi PaperA3 Nobi A3 Wide Tabloid Extra The printer detects A3 Nobi, A3 Wide and Tabloid Extra sizes as the same. Use this setting to tell the printer which of the three sizes is loaded in Tr a y m . Legal 14 PaperLegal 14 Legal 13.5 Sets the length of the legal paper in Traym. Change this to Legal 13.5 if that is the standard legal size in your country. A5/A6 Paper A5/A6 Postcard The printer detects A5, A6 and Postcard sizes as the same. Use this setting to tell the printer which of the three sizes is loaded in Tr a y m . ITEMVALUEDESCRIPTION Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 142 MP Tray Config Paper Size A3 Nobi A3 Wide A3 A4 Sht Edge A4 Long Edge (A) A5 A6 B4 B5 Short Edge B5 Long Edge Legal 14 Legal 13.5 Tabloid Extra Tabloid Letter Sht Edge Letter Long Edge (L) Executive Custom Com-9 Envelope Com-10 Envelope Monarch Envelope DL Envelope Landscape Postcard Double postcard C5 C4 Envelope Index Card Sets paper size for MP Tr a y. X Dimension 3 – 8.3 (A) – 8.5 (L) – 12.9 inch 76 – 210 (A) – 216 (L) – 328 mmSets Custom paper width for the MP Tray. Sets for the direction perpendicular to the direction of paper movement. Y Dimension 3.5 – 11.0 (L) – 11.7 (A) – 47.2 inch 90 – 279 (L) – 297 (A) – 1200 mmSets Custom paper length for MP Tray. Sets for the same direction as paper movement. ITEMVALUEDESCRIPTION Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 143 MP Tray Config Media Type Plain Letterhead Transparency Labels Bond Recycled Card stock Rough Glossy Envelope User Type1 User Type2 User Type3 User Type4 User Type5 Sets the media type for MP Tray. Media Weight Auto Light Medium Light Medium Medium Heavy Heavy Ultra Heavy 1 Ultra Heavy 2 Ultra Heavy 3Sets the media weight for MP Tray. Tray Usage Normal Tray Tray selection/switching uses this tray as the normal tray. When MismatchingIf a paper size or type in a tray is not matched to that of the print data, use paper from this tray instead of the specified tray. Do Not Use Makes the MP tray unavailable in auto tray selection/switching. ITEMVALUEDESCRIPTION Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 144 SYSTEM ADJUST ITEMVALUEDESCRIPTION Power Save Time5 min 15 min 30 min 60 min 240 minSets the period after which power save mode starts. Clearable Wa r n i ngOnline JobWhen Online is selected, you must manually clear the warning by pressing the Online button. Change to Job if you wish the message to automatically clear when a new print job is received. Auto Continue ON OFFSets whether the printer is automatically recovered when Memory Overflow or Tr a y R e q u e s t o c c u r s . Manual Timeout OFF 30 sec 60 secIf paper is not fed within this time in manual feed, the job is cancelled. Wait Timeout OFF 5 sec 10 sec 20 sec 30 sec 40 sec 50 sec 60 sec 90 sec 120 sec 150 sec 180 sec 210 sec 240 sec 270 sec 300 secSets the time period between stopping receipt of job data and forced print. For PS, printing is not carried out and the job is cancelled. Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 145 Low TonerContinue Stop Sets the printing operation when insufficient toner is detected. Continue: the printer can continue printing while remaining online. Stop: the printer stops printing and goes offline. Jam Recovery ON OFFON: continues printing the job, including any jammed pages, once the jam has been cleared. OFF: Cancels a job including the page currently jammed. Print Position AdjustX Adjust 0.00 +0.25 – +2.00 -2.00 – -0.25 mm 0.00 +0.01 – +0.08 -0.08 – -0.01 inAdjusts the position of the whole printing image (0.25 mm, 0.01 in interval) perpendicular to the direction of paper movement (i.e. horizontally). Y Adjust 0.00 +0.25 – +2.00 -2.00 – -0.25 mm 0.00 +0.01 – +0.08 -0.08 – -0.01 inAdjusts the position of the whole printing image (0.25 mm, 0.01 in interval) parallel to the direction of paper movement (i.e. vertically). ITEMVALUEDESCRIPTION Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 146 Print Position AdjustDuplex X Adjust0.00 +0.25 – +2.00 -2.00 – -0.25 mm 0.00 +0.01 – +0.08 -0.08 – -0.01inDuring the flip-side printing of duplex printing, adjusts the location of the whole printing image (0.25 mm, 0.01in interval) perpendicular to the direction of paper movement (i.e. horizontally). Duplex Y Adjust0.00 +0.25 – +2.00 -2.00 – -0.25 mm 0.00 +0.01 – +0.08 -0.08 – -0.01 in During the flip-side printing of duplex printing, adjusts the location of the whole printing image (0.25 mm, 0.01 in interval) parallel to the direction of paper movement (i.e. vertically). xxxx Darkness0 +1 – +3 -4 – -1Adjusts the xxxx engine density where xxxx is one of Cyan, Magenta, Yellow, Black. Darkest value is +3. xxxx Reg Fine Adjust0 +1 – +3 -3 – -1Makes fine adjustment to image registration in xxxx against Black in the horizontal direction, where xxxx is one of Cyan, Magenta, Ye l l o w. If the paper movement direction is upward, a value set on the plus side, means the image relatively moves downward. ITEMVALUEDESCRIPTION Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 147 Paper Black Setting0 +1 – +2 -2 – -1Used for micro adjustment when very visible faded print results or light specks (or streaks) result when printing in Plain Paper/Black setting. Decrease the value if light specks (or streaks) or snow flake like printing results in high density print areas. Paper Color Setting0 +1 – +2 -2 – -1Used for micro adjustment when very visible faded print results or light specks (or streaks) result when printing in Plain Paper/Color setting. Decrease the value if light specks (or streaks) or snow flake like printing results in high density print areas Transparency Black Setting0 +1 – +2 -2 – -1As for Paper Black Setting above. Transparency Color Setting0 +1 – +2 -2 – -1As for Paper Color Setting above. Drum Cleaning ON OFF Set to produce idling of a drum before printing in order to reduce horizontal white lines. This shortens image drum life. Hex Dump Execute Prints out the data received from the host PC in hexadecimal code. ITEMVALUEDESCRIPTION Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 148 MENUS EXAMPLE 1 – TRAY 1 TRANSPARENCIES To print on transparencies (accommodated in Tray1): 1.Ensure that the display panel indicates that the printer is ready to print. 2.Enter menu mode by pressing either the Up-arrow or Down-arrow button and press them repeatedly until the Menus menu is highlighted. 3.Press the Enter button to select this menu. 4.Press the Up-arrow or Down-arrow buttons repeatedly until Tray Configuration is highlighted. 5.Press the Enter button to select this Item. 6.Press the Up-arrow or Down-arrow buttons repeatedly until Tray1 Config is highlighted. 7.Press the Enter button to select this Item. 8.Press the Up-arrow or Down-arrow buttons repeatedly until MediaType is highlighted. 9.Press the Enter button to select this Item. 10.Press the Up-arrow or Down-arrow buttons repeatedly to move through the range of media types until Transparency is highlighted. 11.Press the Enter button to select this value. 12.Check that an asterisk (*) appears beside Transparency. 13.Press the Online button to exit menu mode and return to the ready to print status. Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 149 MENUS EXAMPLE 2 – MP TRAY PAPER SIZE To set paper size in the MP Tray: 1.Ensure that the display panel indicates that the printer is ready to print. 2.Enter menu mode by pressing either the Up-arrow or Down-arrow button and press them repeatedly until the Menus menu is highlighted. 3.Press the Enter button to select this menu. 4.Press the Up-arrow or Down-arrow buttons repeatedly until Tray Configuration is highlighted. 5.Press the Enter button to select this Item. 6.Press the Up-arrow or Down-arrow buttons repeatedly until MP Tray Config is highlighted. 7.Press the Enter button to select this Item. 8.Press the Up-arrow or Down-arrow buttons repeatedly until Paper Size is highlighted. 9.Press the Enter button to select this Item. 10.Press the Up-arrow or Down-arrow buttons repeatedly to move through the range of paper sizes until the required size is highlighted. 11.Press the Enter button to select this value. 12.Check that an asterisk (*) appears beside the chosen size. 13.Press the Online button to exit menu mode and return to the ready to print status. Downloaded From ManualsPrinter.com Manuals
C9850 User’s Guide> 150 OKI SERVICE CENTERS AUTHORIZED SERVICE P ROVIDERS Oki Data has over 2,000 local Authorized Service Providers in North and South America. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers: Consult our web site at www.okidata.com In the U.S. and Canada, call 1 800 654 3282 (1 800 OKI-DATA) In Latin America, contact the Latin America Service Coordinator at Oki Datas Corporate Headquarters at 856-222-5276 / 856-222-7496 (Spanish only). OKI DATA CONTACT L OCATIONS United States Phone: 1-800-654-3282 (USA and Canada only) Fax: 1-856-222-5247 Canada Phone: 1-800-654-3282 (USA and Canada only) Fax: 1-905-238-4421 Mexico Visit nuestro sitio Web multilingue: www.okiprintingsolutions.com Favor llamar al: • 52-555-263-8780 (Oki Data de México, S.A. de C.V.) • 1-856-222-7496 (solo en Español) Brazil • Ligue para 0800-11-55-77 (central de atendimento) • e-mail: [email protected] Downloaded From ManualsPrinter.com Manuals