OKI C9650hdn User Manual

							C9650 User’s Guide> 41
GETTING STARTED
This section provides information to help you get started with using 
your printer.
PRINTER LOCATION
Check that you have sufficient space for access:
>around your printer:
60cm 60cm20cm 8in
100cm 40in
24in 24in
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 42
>above your printer:
TURNING OFF/ON
TURNING OFF
No hard disk drive installed
1.If a hard disk drive is NOT installed, use the On/Off switch.
70cm
28in
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 43
Hard disk drive installed
1.If your printer has a hard disk drive installed, hold down the 
Shutdown/Restart button (1) on the control panel for more 
than 2 seconds to start the shutdown process.
2.When the display panel shows that you can either turn off or 
restart the printer, use the On/Off switch to turn off the 
printer.
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 44
TURNING ON
NOTE
If the display panel shows that you can either turn off or restart 
the printer, press Shutdown/Restart to turn on the printer.
1.If the printer is turned off (no power), use the On/Off switch 
to turn on the printer.
CHANGING THE DISPLAY LANGUAGE
The default language used by your printer for display messages and 
for report printing is English. If required, this can be changed using 
the Panel Language Download Utility located on the installation CD 
under Optional Utilities.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 45
CHECKING CURRENT SETTINGS
Carry out the following steps to generate a Configuration report 
(Menu Map) to confirm that your printer is correctly configured.
1.Ensure that there is Letter paper in Tray 1 (to be used in this 
operation).
2.Ensure that the display panel indicates that the printer is 
ready to print.
3.Press the Up-arrow or Down-arrow buttons repeatedly 
until Print Information is highlighted.
4.Press the Enter button to select Print Information.
5.Press the Up-arrow or Down-arrow buttons repeatedly 
until Configuration is highlighted.
6.Press the Enter button to select Configuration.
7.Press the Enter button to execute the command and a 
Configuration document is printed.
8.After printing the configuration document, the printer returns 
to the ready to print status.
You can use this document to check your printer 
configuration. System values and installed accessories are 
listed at the top of the first page while status values and 
settings follow.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 46
INTERFACES AND CONNECTION
Your printer is equipped with a selection of data interfaces:
>Parallel – For direct connection to a PC. This port requires a 
bi-directional (IEEE 1284 compliant) parallel cable.
>USB – This port requires a cable conforming to USB version 
2.0 or above.
The printer may not work if a USB- compatible device is 
connected concurrently with other USB-compatible machines.
When connecting multiple printers of the same type, they 
appear as *****, ***** (2), ***** (3), etc. These numbers 
depend on the order of connecting or turning on each printer.
>Ethernet – For network cable connection.
NOTE
Interface cables are not supplied with your printer.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 47
CONNECTING THE PARALLEL INTERFACE
1.Turn off the printer and the computer.
2.Connect a parallel cable between the printer and computer.
3.Turn on the printer and then the computer.
CONNECTING THE USB INTERFACE
Do not connect the USB cable at this time. You will be instructed 
when to connect the USB cable when you run the Drivers CD.
If you are connecting your printer directly to a stand alone computer 
proceed to the section entitled “Printer Drivers”.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 48
CONNECTING THE NETWORK INTERFACE
1.Turn off the printer and the computer.
2.Install the Ferrite core to the Ethernet cable as shown.
CAUTION!
Do not connect a USB cable into the network interface 
connector as this may lead to malfunction.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 49
3.Connect an Ethernet cable between the printer and an 
Ethernet hub.
4.Turn on the printer and then the computer.
If your printer is to be installed as a network printer, please refer to 
the relevant section in the Software Installation Guide and 
Configuration Guide for further details on how to configure the 
network connection before installing the printer drivers.
NOTE
Administrator’s authority is required when installing a network 
connection.
USING THE DRIVERS CD
Insert the Printer Software CD into your computer and follow the on-
screen instructions. You are prompted to follow a set of basic steps 
to configure the display panel language, install drivers and other 
software and finally print a test page to check that your printer is 
operating correctly.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 50
OPERATION
USING THE PRINTER
For full details of how to use the printer and any optional accessories 
to print jobs efficiently and effectively, please refer to the Printing 
Guide.
Downloaded From ManualsPrinter.com Manuals