OKI C9650hdn User Manual

							C9650 User’s Guide> 121 Low TonerContinue 
Stop Sets the printing 
operation when 
insufficient toner is 
detected. 
Continue: the printer 
can continue printing 
while remaining 
online. 
Stop: the printer 
stops printing and 
goes offline.
Jam Recovery ON 
OFFON: continues 
printing the job, 
including any jammed 
pages, once the jam 
has been cleared.  
OFF: Cancels a job 
including the page 
currently jammed.
Error Report  ON 
OFFON: prints an error 
report during the 
occurrence of an 
internal error. This 
item is valid only for 
PS and PCLXL.
Print Position 
AdjustX Adjust 0.00  
+0.25 – +2.00  
-2.00 – -0.25 
mm
0.00 
+0.01 – +0.08 
-0.08 – -0.01 
inAdjusts the position 
of the whole printing 
image (0.25 mm, 
0.01 in interval) 
perpendicular to the 
direction of paper 
movement (i.e. 
horizontally).
Y Adjust 0.00  
+0.25 – +2.00  
-2.00 – -0.25 
mm
0.00 
+0.01 – +0.08 
-0.08 – -0.01 
inAdjusts the position 
of the whole printing 
image (0.25 mm, 
0.01 in interval) 
parallel to the 
direction of paper 
movement (i.e. 
vertically).
ITEMVALUEDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 122 Print Position 
AdjustDuplex X Adjust0.00  
+0.25 – +2.00 
-2.00 – -0.25 
mm 
0.00 
+0.01 – +0.08 
-0.08 – -0.01inDuring the flip-side 
printing of duplex 
printing, adjusts the 
location of the whole 
printing image (0.25 
mm, 0.01in interval) 
perpendicular to the 
direction of paper 
movement (i.e. 
horizontally). 
Duplex Y Adjust0.00  
+0.25 – +2.00 
-2.00 – -0.25 
mm
0.00 
+0.01 – +0.08 
-0.08 – -0.01 
in During the flip-side 
printing of duplex 
printing, adjusts the 
location of the whole 
printing image (0.25 
mm, 0.01 in interval) 
parallel to the 
direction of paper 
movement (i.e. 
vertically). 
Paper Black 
Setting0 
+1 
+2 
-2 
-1Used for fine black 
adjustment for a 
significantly white 
horizontal dotted line, 
a significantly faded 
image or other such 
problem that occurs 
in results printed on 
plain paper. 
Decrement setting 
when a white 
horizontal dotted line 
or a snowing image 
occurs in high-
coverage print 
portions. Increment 
setting when a faded 
image occurs.
ITEMVALUEDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 123 Paper Color 
Setting0 
+1 
+2 
-2 
-1Used for fine color 
adjustment for a 
significantly white 
horizontal dotted line, 
a significantly faded 
image or other such a 
problem that occurs 
in results printed on 
plain paper. 
Decrement setting 
when a white 
horizontal dotted line 
or a snowy image 
occurs in high-
coverage print 
portions. Increment 
setting when a faded 
image occurs.
Trans. Black 
Setting0 
+1 
+2 
-2 
-1Used for fine black 
adjustment for a 
significantly white 
horizontal dotted line, 
a significantly faded 
image or other such a 
problem that occurs 
in results printed on 
transparencies. 
Decrement setting 
when a white 
horizontal dotted line 
or a snowy image 
occurs in high-
coverage print 
portions. Increment 
setting when a faded 
image occurs.
Tr a n s .  C o l o r  
Setting0 
+1 
+2 
-2 
-1Used for fine color 
adjustment for a 
significantly white 
horizontal dotted line, 
a significantly faded 
image or other such a 
problem that occurs 
in results printed on 
transparencies. 
Decrement setting 
when a white 
horizontal dotted line 
or a snowy image 
occurs in high-
coverage print 
portions. Increment 
setting when a faded 
image occurs.
ITEMVALUEDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 124
MENUS EXAMPLE 1 – TRAY 1 TRANSPARENCIES
To print on transparencies (accommodated in Tray1):
1.Ensure that the display panel indicates that the printer is 
ready to print.
2.Enter menu mode by pressing either the Up-arrow or 
Down-arrow button and press them repeatedly until the 
Menus menu is highlighted.
3.Press the Enter button to select this menu.
4.Press the Up-arrow or Down-arrow buttons repeatedly 
until Tray Configuration is highlighted.
SMR Setting0 
+1 
+2 
+3 
-3 
-2 
-1Corrects print result 
variations caused by 
differences in 
temperature and 
humidity 
environment, or print 
density or frequency. 
This setting must be 
changed when print 
quality varies by 
printed result.
BG Setting0 
+1 
+2 
+3 
-3 
-2 
-1Corrects print result 
variations caused by 
differences in 
temperature and 
humidity 
environment, or print 
density or frequency. 
This setting must be 
changed when a dark 
background occurs in 
printed result.
Drum Cleaning ON 
OFFSet to produce idling 
of a drum before 
printing in order to 
reduce horizontal 
white lines. This 
shortens image drum 
life.
Hex Dump Execute Prints out the data 
received from the 
host PC in 
hexadecimal code.
ITEMVALUEDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 125
5.Press the Enter button to select this Item.
6.Press the Up-arrow or Down-arrow buttons repeatedly 
until Tray1 Config is highlighted.
7.Press the Enter button to select this Item.
8.Press the Up-arrow or Down-arrow buttons repeatedly 
until MediaType is highlighted.
9.Press the Enter button to select this Item.
10.Press the Up-arrow or Down-arrow buttons repeatedly to 
move through the range of media types until Transparency is 
highlighted.
11.Press the Enter button to select this value.
12.Check that an asterisk (*) appears beside Transparency.
13.Press the Online button to exit menu mode and return to the 
ready to print status.
MENUS EXAMPLE 2 – MP TRAY PAPER SIZE
To set paper size in the MP Tray:
1.Ensure that the display panel indicates that the printer is 
ready to print.
2.Enter menu mode by pressing either the Up-arrow or 
Down-arrow button and press them repeatedly until the 
Menus menu is highlighted.
3.Press the Enter button to select this menu.
4.Press the Up-arrow or Down-arrow buttons repeatedly 
until Tray Configuration is highlighted.
5.Press the Enter button to select this Item.
6.Press the Up-arrow or Down-arrow buttons repeatedly 
until MP Tray Config is highlighted.
7.Press the Enter button to select this Item.
8.Press the Up-arrow or Down-arrow buttons repeatedly 
until Paper Size is highlighted.
9.Press the Enter button to select this Item.
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 126
10.Press the Up-arrow or Down-arrow buttons repeatedly to 
move through the range of paper sizes until the required size 
is highlighted.
11.Press the Enter button to select this value.
12.Check that an asterisk (*) appears beside the chosen size.
13.Press the Online button to exit menu mode and return to the 
ready to print status.
Downloaded From ManualsPrinter.com Manuals