OKI C9650hdn User Manual

							C9650 User’s Guide> 21
12.Face-up stacker
13.Interface unit
14.Network interface connector
10
11 12
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 22
15.Parallel interface connector
16.USB interface connector
17.Power connector
18.Ventilation openings
19.Image drum cartridge and toner cartridge (Cyan)
20.Image drum cartridge and toner cartridge (Magenta)
13
17 1814
15
16
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 23
21.Image drum cartridge and toner cartridge (Yellow)
22.Image drum cartridge and toner cartridge (Black)
23.Toner cartridge
24.Image drum cartridge
25.Fuser unit
26.LED heads
27.Belt unit
28.Drum basket handle
19
20
21
22
23
24 2526
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 24
29.Drum basket
27 2829
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 25
PAPER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of 
paper weights and sizes, transparencies and envelopes. This section 
provides general advice on choice of media, and explains how to use 
each type.
The best performance will be obtained when using standard weight 
20 – 24 lb (75 – 90 g/m²) paper designed for use in copiers and 
laser printers. Suitable types are:
>OKI® Bright White, 32 lb US Bond
>HammerMill® Laser Print Radiant, White, 24 lb US Bond
>Xerox® 4024, 20 lb US Bond
Use of heavily embossed or very rough textured paper is not 
recommended.
Pre-printed stationery can be used, but the ink must not offset 
when exposed to the high fuser temperatures used in the printing 
process.
Envelopes should be free from twist, curl or other deformations. 
They should also be of the rectangular flap type, with glue that 
remains intact when subjected to hot roll pressure fusing used in this 
type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers 
and laser printers. In particular, avoid office transparencies 
designed for use by hand with marker pens. These will melt in the 
fuser and cause damage.
Labels should also be of the type recommended for use in copiers 
and laser printers, in which the base carrier page is entirely covered 
by labels. Other types of label stock may damage the printer due to 
the labels peeling off during the printing process. Suitable types are:
>Avery White Laser Label types 7162, 7664, 7666 (A4), or 
5161 (Letter)
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 26
PAPER INPUT AND OUTPUT INFORMATION
The following table relates paper parameters to input trays (Tray 1 
to Tray 5 (numbering from the top) and MP Tray) and to output 
areas (Face-down stacker and Face-up stacker).
TYPESIZEWEIGHTINPUT/
OUTPUT
Plain  paper A3, A3 Nobi, A3 Wide, 
A4, A5, A6, B4, B5, 
Letter, Legal 13, 
Legal 13.5, Legal 14, 
Executive, Tabloid, 
Ta b l o i d  E x t r a17 – 57 lb Any Tray
Any Stacker
Custom 
W: 3.94 – 12.91 in
L: 5.82 – 18 in17 – 57 lb Any Tray
Fa c e -u p  St a c ker
Custom 
W: 3.12 – 12.91 in
L: 3.54 – 18 in15 – 71 lb MP Tray
Fa c e -u p  St a c ker
Banner 
W: Letter width
L: 18 – 48 in34 lb 
recommendedMP Tray
Fa c e -u p  St a c ker
Index card: 
3 x 5 in15 – 71 lb MP Tray
Fa c e -u p  St a c ker
Postcard – – Tray 1 or MP Tray
Fa c e -u p  St a c ker
Envelope 4.72 x 9.25 in 
3.54 x 8.07 in 
9.25 x 4.72 in 
9.25 x 4.13 in 
9.45 x 13.07 in 
8.50 x 10.91 in 
4.69 x 7.76 in 
8.27 x 11.69 in23 lb MP Tray
Fa c e -u p  St a c ker
12.76 x 9.02 in 
9.02 x 6.38 in 
8.66 x 4.33 in 
8.88 x 3.88 in 
9.5 x 4.13 in 
7.5 x 3.88 inBased on 
24 lb paper
Labels A4, Letter, B5 0.004 – 
0.008 inMP Tray
Fa c e -u p  St a c ker
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 27
TRAYS AND STACKERS
TRAYS 1 TO 5
Tray 1 is the standard blank paper input tray and can hold up to 530 
sheets of 20 lb (75 g/m²) paper. Additional trays, to give a total of 
five, can be added as an option to give a total tray capacity of 2650 
sheets of 20 lb (75 g/m²) paper.
If you have identical paper stock loaded in another tray (for example 
Tray 2 or the MP Tray), you can have the printer automatically 
switch to that other tray when the current tray runs out of paper. 
This function can be enabled by driver settings when printing from a 
Windows application or by a menu setting when printing from other 
applications.
MP TRAY
The multi-purpose tray is used for media sizes additional to those of 
the standard trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the standard 
trays but in weights up to 73 lb (330 g/m²). For very heavy paper 
stock use the face-up paper stacker. This ensures that the paper 
path through the printer is almost straight.
The multi-purpose tray can feed paper widths as small as 3in 
(76.2 mm) and lengths up to 47.24 in (1200 mm). For banner 
printing, recommended sizes are Letter wide, 35.43 in and 47.24 in 
long and weight 34 lb (128 g/m²).
Use the multi purpose tray for printing on envelopes and 
transparencies. Up to 100 sheets of transparencies or 25 envelopes 
can be loaded at one time, subject to a maximum stacking depth of 
1 in.
Paper or transparencies should be loaded print side up and top edge 
into the printer. Do not use the duplex (two-sided printing) function 
for transparencies.
Transparencies
Glossy paperA4, Letter 0.004 in Tray 1 or MP Tray
Fa c e -u p  St a c ker
TYPESIZEWEIGHTINPUT/
OUTPUT
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 28
FACE-DOWN STACKER
The face-down stacker on the top of the printer can hold up to 500 
sheets of 20 lb (80 g/m²) standard paper, and can handle paper 
stocks from 17 – 57 lb (64 – 216 g/m²). Pages printed in reading 
order (page  1 first) will be sorted in reading order (last page on top, 
facing down).
FACE-UP STACKER
The face-up stacker should be opened and the tray extension pulled 
out when required for use. (With the face-up stacker either open or 
closed, the driver setting of Face Down will successfully direct prints 
to the Face-Down stacker.)
The face-up stacker can hold up to 200 sheets of 20 lb (80 g/m²) 
standard paper and can handle stocks up to 73 lb (330 g/m²).
Always use this stacker and the multi-purpose feeder for paper 
stocks heavier than 57 lb (216 g/m²).
DUPLEX UNIT (IF INSTALLED)
This option provides automatic two-sided printing on plain paper fed 
from Trays 1 – 5 or the MP Tray. Applicable paper sizes are A6, A5, 
B5, B5LEF, Executive, A4, A4LEF, Letter, LetterLEF, Legal 13 in, 
Legal 13.5 in, Legal 14 in, B4, Tabloid, Tabloid Extra, A3, A3 Wide, 
A3 Nobi, Custom size (3.9 – 12.9 in wide, 5.8 –18 in long), using 
paper stocks in the range 20 – 32 lb (75 – 120 g/m²).
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 29
TRAY AND STACKER EXAMPLES
LOADING TRAYS 1 TO 5
Tray 1 is used in the following example.
1.Pull out the tray.
2.Press the paper rear stopper tab (1) and adjust the tab to the 
required paper size.
3.Fan the paper to be loaded then tap the edges of the stack on 
a flat surface to make it flush.
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9650 User’s Guide> 30
4.Load the paper (face down and top edge towards the right for 
letterhead paper), press the tab (2) on the paper guide and 
adjust the guides (3) for a snug fit to the paper.
To avoid paper jams:
• Do not leave space between the paper and the guides and 
rear stopper.
• Do not overfill the paper tray. Capacity depends on the 
paper type.
• Do not load damaged paper.
• Do not load paper of different sizes or types at the same 
time.
23
Downloaded From ManualsPrinter.com Manuals