OKI C9650hdn User Manual

C9650 User’s Guide> 71
Holding the fuser unit (4) by the handle, lift it out of the 
printer and place it on a flat surface.
5.Pull up the jam release levers (5) and remove the jammed 
paper.
4
3
5
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 72
6.Carefully replace the fuser unit into the printer and turn the 
lock lever (6) in the direction shown to lock the fuser unit.
7.If paper is jammed near the paper exit, open the face-up 
stacker (7).
6
7
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 73
8.Open the side cover (paper exit) (8) and remove the jammed 
paper.
9.Close the side cover (paper exit) and then the face-up 
stacker.
8
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 74
10.Return the image drum basket (9) into position and check it 
is locked.
11.Close the top cover and ensure it is latched.
9
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 75
PAPER JAMS – DUPLEX UNIT (IF INSTALLED)
CHECK DUPLEX UNIT, PAPER JAM
1.If a Finisher unit is attached to your printer, operate the lever 
(1) of the Inverter unit to separate the Inverter from the 
printer.
2.Operate the duplex cover release button (2) and open the 
cover.
1
2
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 76
3.Carefully remove any jammed paper.
4.Operate the levers (3) and pull out the duplex unit.
3 3
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 77
5.Holding the front top cover by the grip (4), push it gently 
inwards and raise it.
6.Remove any jammed paper.
4
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 78
7.In similar manner, check for and clear any paper jammed 
under the rear top cover.
8.Replace the two top covers.
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 79
9.Raise the front cover of the duplex unit.
10.Push the duplex unit back into position.
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 80
11.If you detached a Finisher unit to gain access to the duplex 
unit, replace the Finisher unit.
Downloaded From ManualsPrinter.com Manuals