OKI C9650hdn User Manual

C9650 User’s Guide> 121 Low TonerContinue 
Stop Sets the printing 
operation when 
insufficient toner is 
detected. 
Continue: the printer 
can continue printing 
while remaining 
online. 
Stop: the printer 
stops printing and 
goes offline.
Jam Recovery ON 
OFFON: continues 
printing the job, 
including any jammed 
pages, once the jam 
has been cleared.  
OFF: Cancels a job 
including the page 
currently jammed.
Error Report  ON 
OFFON: prints an error 
report during the 
occurrence of an 
internal...

C9650 User’s Guide> 122 Print Position 
AdjustDuplex X Adjust0.00  
+0.25 – +2.00 
-2.00 – -0.25 
mm 
0.00 
+0.01 – +0.08 
-0.08 – -0.01inDuring the flip-side 
printing of duplex 
printing, adjusts the 
location of the whole 
printing image (0.25 
mm, 0.01in interval) 
perpendicular to the 
direction of paper 
movement (i.e. 
horizontally). 
Duplex Y Adjust0.00  
+0.25 – +2.00 
-2.00 – -0.25 
mm
0.00 
+0.01 – +0.08 
-0.08 – -0.01 
in During the flip-side 
printing of duplex 
printing, adjusts the...

C9650 User’s Guide> 123 Paper Color 
Setting0 
+1 
+2 
-2 
-1Used for fine color 
adjustment for a 
significantly white 
horizontal dotted line, 
a significantly faded 
image or other such a 
problem that occurs 
in results printed on 
plain paper. 
Decrement setting 
when a white 
horizontal dotted line 
or a snowy image 
occurs in high-
coverage print 
portions. Increment 
setting when a faded 
image occurs.
Trans. Black 
Setting0 
+1 
+2 
-2 
-1Used for fine black 
adjustment for a 
significantly...

C9650 User’s Guide> 124
MENUS EXAMPLE 1 – TRAY 1 TRANSPARENCIES
To print on transparencies (accommodated in Tray1):
1.Ensure that the display panel indicates that the printer is 
ready to print.
2.Enter menu mode by pressing either the Up-arrow or 
Down-arrow button and press them repeatedly until the 
Menus menu is highlighted.
3.Press the Enter button to select this menu.
4.Press the Up-arrow or Down-arrow buttons repeatedly 
until Tray Configuration is highlighted.
SMR Setting0 
+1 
+2 
+3 
-3 
-2...

C9650 User’s Guide> 125
5.Press the Enter button to select this Item.
6.Press the Up-arrow or Down-arrow buttons repeatedly 
until Tray1 Config is highlighted.
7.Press the Enter button to select this Item.
8.Press the Up-arrow or Down-arrow buttons repeatedly 
until MediaType is highlighted.
9.Press the Enter button to select this Item.
10.Press the Up-arrow or Down-arrow buttons repeatedly to 
move through the range of media types until Transparency is 
highlighted.
11.Press the Enter button to select...

C9650 User’s Guide> 126
10.Press the Up-arrow or Down-arrow buttons repeatedly to 
move through the range of paper sizes until the required size 
is highlighted.
11.Press the Enter button to select this value.
12.Check that an asterisk (*) appears beside the chosen size.
13.Press the Online button to exit menu mode and return to the 
ready to print status.
Downloaded From ManualsPrinter.com Manuals