OKI C9650hdn User Manual

C9650 User’s Guide> 91
3.Carefully remove any jammed paper.
4.Close the Inverter left side cover.
5.Move the Finisher back into position and connect it to the 
Inverter.
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 92
6.Operate the Inverter lever (3) and separate the Inverter from 
the printer.
7.Open the right side door (4) of the Inverter.
3
4
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 93
8.Remove any jammed paper.
9.Close the right side door.
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 94
10.Move the Finisher and Inverter back into position and connect 
to the printer.
AVOIDING PAPER JAMS
The following table summarizes possible causes of paper jams and 
suggests ways of avoiding them.
POSSIBLE CAUSESUGGESTED REMEDY
The printer is not level. Place the printer on a steady, level surface.
Your print media is too light or 
too heavy.Use appropriate media.
Your print media is damp or 
charged with static electricity.Use media that has been stored in 
appropriate...

C9650 User’s Guide> 95
DEALING WITH UNSATISFACTORY PRINTING
Your printer feed roller is dirty. Wipe the roller with a cloth moistened with 
water.
Your printer feed rollers are 
wearing out.Replace the feed rollers.
The media weight or type 
have been wrongly set.Select the correct printer menu settings for 
[Media Weight] and [Media Type].
SYMPTOMS POSSIBLE CAUSESSTEPS TO TAKE
Vertical white lines 
can be seen on the 
printed page.The LED head is dirty.  Wipe the LED head with a 
LED lens cleaner or...

C9650 User’s Guide> 96 Printing is light.  The toner cartridge is 
not properly seated. Reinstall the toner 
cartridge. 
The toner is low.  Replace the toner cartridge. 
The paper is moist.  Use paper stored in proper 
temperature and humidity 
conditions. 
The paper is not 
suitable for the printer. Use recommended paper. 
Thickness and type of 
paper are inappropriate. Set a proper value for 
[Media Weight] and [Media 
Type] in the menu setup, or 
set one value thicker for 
[Media Weight]. 
Recycled...

C9650 User’s Guide> 97
STAPLE JAMS – FINISHER (OPTIONAL ACCESSORY)
CHECK FINISHER, STAPLE JAM
When the display indicates a staple jam has occurred, clear the jam 
as follows:
1.Open the Finisher front cover.
White area of paper 
is lightly stained. Paper contains static.  Use paper stored in proper 
temperature and humidity 
conditions. 
Too thick paper is used.  Use thinner paper. 
The toner is low.  Replace the toner cartridge. 
Periphery of the 
letters is smudged. The LED head is dirty.  Wipe the...

C9650 User’s Guide> 98
2.Turn the knob in the direction indicated until the colored 
indicator appears.
3.Remove any paper that awaits stapling in the paper ejection 
area.
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 99
4.Pull out the staple unit.
5.Turn the knob in the direction indicated to move the stapler 
to the front.
Downloaded From ManualsPrinter.com Manuals 

C9650 User’s Guide> 100
6.Grip both sides of the staple cartridge, pull it up and remove 
it.
7.Raise the staple cartridge gate.
8.Remove all staples that are emerging from the staple case.
Downloaded From ManualsPrinter.com Manuals