OKI C8800dn User Manual

							
C8800 User’s Guide281
Windows, All Print Jobs (Default)
For more information,  see “General Information” on page   279.  
1. Click Start  → Settings  →  Printers (Printers and Faxes 
for XP).
2. Right click on your printer.
3. Click Properties.
4. Click the General tab (if necessary).
5. Click Printing Preferences.
6. Click the Job Options tab.
7. Under Quality, make your selection.
For more information,  see “Resolution Choices” on page 
 280.  
8. Change any other settings as desired.
9. Click OK.
10. The General tab screen appears.
11. Change any other settings as desired.
12. Click OK.
13. The Printers and Faxes screen appears.
14. Close the screen.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide282
Windows, Single Print Job
For more information,  see “General Information” on page   279.   
1. Open the file you want to print.
2. Click File  → Print.
3. Select your printer. 
4. Click Properties.
5. Click the Job Options tab. 
6. Under Quality, select the requ ired printing resolution.  
For more information,  see “Resolution Choices” on page 
 280.   
7. Change any other settings as desired. 
8. Click OK. 
9. The main Print screen appears. 
10. Change any other settings as desired. 
11. Click OK. 
12. The document prints. 
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide283
Macintosh OS 9.x 
For more information,  see “General Information” on page   279.  
1. Open the file you want to print.
2. On File, click Print. 
3. In the Job Option panel, unde r Print Quality, make your 
choice. 
Fast: 600 x 600 dpi 
Fine:  600 x 1200 dpi 
4. Click OK. 
5. Print the document. 
Macintosh OS 10.1, 10.2, and 10.3 
For more information,  see “General Information” on page   279.  
1. Open the file you want to print.
2. On File, click Print. 
3. In the Printer Function panel, under Print Quality, make 
your choice. 
Fast: 600 x 600 dpi 
Fine:  600 x 1200 dpi 
4. Click OK. 
5. Print the document. 
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide284
Save as File ____________________________
(Print to File)
General Information
Use Save as File to save print  data to a file, without actually 
printing a hardcopy.
Save as File captures either  a PDF or a PostScript file.
You can use the LPR Utility to print the saved file.
See “Direct Network Printing Utility (LPR)” on page 329.   
For more information,   Windows, Single Print Job:  see page 285 
Windows, All Print Jobs (Default):  see page 286 
Macintosh OS 9.x:  see page 287 
Macintosh OS 10.1, 10.2, and 10.3:  see page 288 
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide285
Windows, Single Print Job 
For more information,  see “General Information” on page   284.   
1. Open the file you want to print. 
2. Click File  → Print. 
3. Select your printer. 
4. At Print to File, make your selection. 
If the box has a check mark, the feature is ON.
If the box is empty, the feature is OFF.
5. Click OK.
6. Next:
select where to save the file  
give the file a name  
determine the type of the file  
7. Click OK.   
8. The document “prints.”    
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide286
Windows, All Print Jobs (Default)  
For more information,  see “General Information” on page   284.    
1. Click Start  → Settings  →  Printers (Printers and Faxes 
for XP).   
2. Right click on your printer.   
3. Click Properties.  
4. On the Ports tab, select File:  Print to File.  
5. Click OK.  
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide287
Macintosh OS 9.x  
For more information,  see “General Information” on page   284.    
1. Open the file you want to print. 
2. Click File  → Print.  
3. In Output Tray, select File.  
4. In the PostScript Settings panel, make your choices for 
this print job.
Type:  specify the PostScript type.
PostScript Level: this must match the PostScript level of 
your printer.
Format:  select ASCII or Binary.  If you select Binary, 
make sure that binary data transfer is supported.
Font Data:  specify downloading fonts to the file.  If you 
are only using PostScript fonts, select None.
5. At Name, enter the desired filename.
6. Specify where you want th e file saved (location).
7. Click Save.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide288
Macintosh OS 10.1, 10.2, and 10.3 
For more information,  see “General Information” on page   284.    
1. Open the file you want to print.  
2. Click File  → Print.
3. In Output Options, select Save as File.  
4. In Formats, select PostScript.  
5. In the PostScript Settings panel, make your choices for 
this print job.   
Type:  specify the PostScript type.  
PostScript Level: this must match the PostScript level of 
your printer.   
Format:  select ASCII or Binary.  If you select Binary, 
make sure that binary data transfer is supported.   
Font Data:  specify downloading fonts to the file.  If you 
are only using PostScript fonts, select None.  
6. Click Save.  
7. At Save as a new name, enter the desired filename.  
8. Specify where you want the  file saved (location).  
9. Click Save.   
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide289
Scale to page ___________________________
Scale to Page allows you to print data formatted for one size 
page onto a different size page, without modifying the print 
data.
This feature is only availabl e with the Windows PCL drivers.
1. In the driver’s Setup tab, click the [Options] button.  
2. Check the [Fit to Page] checkbox.
3. Choose the scaling factor you need from the 
[Conversions] drop-down list.
Downloaded From ManualsPrinter.com Manuals 
						

							
C8800 User’s Guide290
Toner Saving ___________________________
General Information
Use Toner Save to maximize the life of your toner cartridges.
Toner Save uses less toner to create the printed images. Toner 
Save adjusts the darkness of the color halftones. Images may 
appear lighter than normal.
Print quality is reduced when toner saving is used.
For more information,  
Windows, Single Print Job:   see page 291   
Windows, All Print Jobs (Default):  see page 292   
Macintosh OS 9.x:   see page 293  
Macintosh OS 10.1, 10.2, and 10.3:   see page 293    
Notes  
1. Toner Save does not work if you are printing 100 per cent  black.
2. Toner Save does not work if Gray Scale is the selected print  mode.
3. Toner Save does not work with applications that allow CMYK  printing when using a PostScript driver. 
4. Toner Save does not work with applications and operating  systems that create print  data in CIE color space.
              
Downloaded From ManualsPrinter.com Manuals